scholarly journals Magnetic capsulate triboelectric nanogenerators

2022 ◽  
Vol 12 (1) ◽  
Author(s):  
Pengcheng Jiao ◽  
Ali Matin Nazar ◽  
King-James Idala Egbe ◽  
Kaveh Barri ◽  
Amir H. Alavi
Keyword(s):  
Energy Harvesting ◽  
Critical Role ◽  
Electrical Power ◽  
Low Frequency ◽  
Electrical Energy ◽  
Electrical Performance ◽  
Research Attention ◽  
Voltage Range ◽  
Significant Research ◽  
Triboelectric Nanogenerators

AbstractTriboelectric nanogenerators have received significant research attention in recent years. Structural design plays a critical role in improving the energy harvesting performance of triboelectric nanogenerators. Here, we develop the magnetic capsulate triboelectric nanogenerators (MC-TENG) for energy harvesting under undesirable mechanical excitations. The capsulate TENG are designed to be driven by an oscillation-triggered magnetic force in a holding frame to generate electrical power due to the principle of the freestanding triboelectrification. Experimental and numerical studies are conducted to investigate the electrical performance of MC-TENG under cyclic loading in three energy harvesting modes. The results indicate that the energy harvesting performance of the MC-TENG is significantly affected by the structure of the capsulate TENG. The copper MC-TENG systems are found to be the most effective design that generates the maximum mode of the voltage range is 4 V in the closed-circuit with the resistance of 10 GΩ. The proposed MC-TENG concept provides an effective method to harvest electrical energy from low-frequency and low-amplitude oscillations such as ocean wave.

Optimizing the Electrical Power in an Energy Harvesting System

2015 ◽  
Vol 25 (12) ◽  
pp. 1550171 ◽  
Author(s):  
Mattia Coccolo ◽  
Grzegorz Litak ◽  
Jesús M. Seoane ◽  
Miguel A. F. Sanjuán
Keyword(s):  
Energy Harvesting ◽  
Kinetic Energy ◽  
High Frequency ◽  
Energy Harvester ◽  
Electrical Power ◽  
Low Frequency ◽  
Electrical Energy ◽  
Resonance Phenomenon ◽  
Vibrational Resonance ◽  
Energy Harvesting System

In this paper, we study the vibrational resonance (VR) phenomenon as a useful mechanism for energy harvesting purposes. A system, driven by a low frequency and a high frequency forcing, can give birth to the vibrational resonance phenomenon, when the two forcing amplitudes resonate and a maximum in amplitude is reached. We apply this idea to a bistable oscillator that can convert environmental kinetic energy into electrical energy, that is, an energy harvester. Normally, the VR phenomenon is studied in terms of the forcing amplitudes or of the frequencies, that are not always easy to adjust and change. Here, we study the VR generated by tuning another parameter that is possible to manipulate when the forcing values depend on the environmental conditions. We have investigated the dependence of the maximum response due to the VR for small and large variations in the forcing amplitudes and frequencies. Besides, we have plotted color coded figures in the space of the two forcing amplitudes, in which it is possible to appreciate different patterns in the electrical power generated by the system. These patterns provide useful information on the forcing amplitudes in order to produce the optimal electrical power.

scholarly journals Acoustic metastructure for effective low-frequency acoustic energy harvesting

2018 ◽  
Vol 37 (4) ◽  
pp. 1015-1029 ◽  
Author(s):  
Ming Yuan ◽  
Ziping Cao ◽  
Jun Luo ◽  
Roger Ohayon
Keyword(s):  
Energy Harvesting ◽  
Sound Pressure ◽  
Electrical Power ◽  
Low Frequency ◽  
Electrical Energy ◽  
Acoustic Energy ◽  
Resonant Phenomenon ◽  
Acoustic Energy Harvesting ◽  
Isolation Performance ◽  
Rubber Film

In this study, a multifunctional acoustic metastructure is proposed to achieve both effective low-frequency sound isolation and acoustic energy harvesting. A metallic substrate with proof mass is adopted to generate the local resonant phenomenon for the purpose of overcoming the drawbacks of the previous rubber film-based acoustic metastructure; the latter usually requires an elaborate tension process. Numerical simulations show that the proposed structure exhibits excellent noise isolation performance in the low-frequency band. Meanwhile, the incident sound energy can be converted into electrical energy with the help of an added piezoelectric patch. Numerical simulation results indicate that the harvested energy can reach the mW level. The parameters’ influence on the metastructure’s vibro-acoustic and energy harvesting performance are discussed in detail. An optimized configuration is selected and used for experimental study. It is demonstrated that 0.21 mW electrical power at 155 Hz can be harvested by the proposed metastructure under 114 dB sound pressure excitation.

scholarly journals Investigation of biocompatible Parylene as triboelectric layer for wearable energy harvesting

2021 ◽  
Vol 7 (2) ◽  
pp. 771-774
Author(s):  
Franz Selbmann ◽  
Mario Baum ◽  
Marco Bobinger ◽  
Markus Gottwald ◽  
Maik Wiemer ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Material Properties ◽  
Dielectric Material ◽  
Low Frequency ◽  
Electrical Energy ◽  
Body Movements ◽  
Mechanical Motion ◽  
Energy Harvesters ◽  
Triboelectric Nanogenerators ◽  
High Output

Abstract Triboelectric nanogenerators (TENGs) are energy converters or energy harvesters that convert mechanical motion into electrical energy on the basis of their material properties. A particular advantage of the TENG is its ability to convert small, low-frequency and random mechanical movements that are relevant for body movements and wearable applications. Within the presented study, different Parylene types were analysed as the dielectric material in TENG and found to be promising with respect to providing high output voltages and powers, respectively. Besides the verification of the usability of Parylene for TENG and its superior triboelectric properties, also significant differences were found between the Parylene types.

Energy Harvesting for Smart Shoes: A Real Life Application

2013 ◽  
Author(s):  
Emanuele Frontoni ◽  
Adriano Mancini ◽  
Primo Zingaretti ◽  
Andrea Gatto
Keyword(s):  
Energy Harvesting ◽  
Power Efficiency ◽  
Indoor Localization ◽  
Electrical Power ◽  
Real Life ◽  
Reducing Power ◽  
Electrical Energy ◽  
General Purpose ◽  
Technical Developments ◽  
Microprocessor Technology

Advanced technical developments have increased the efficiency of devices in capturing trace amounts of energy from the environment (such as from human movements) and transforming them into electrical energy (e.g., to instantly charge mobile devices). In addition, advancements in microprocessor technology have increased power efficiency, effectively reducing power consumption requirements. In combination, these developments have sparked interest in the engineering community to develop more and more applications that utilize energy harvesting for power. The approach here described aims to designing and manufacturing an innovative easy-to-use and general-purpose device for energy harvesting in general purpose shoes. The novelty of this device is the integration of polymer and ceramic piezomaterials accomplished by injection molding. In this spirit, this paper examines different devices that can be built into a shoe, (where excess energy is readily harvested) and used for generating electrical power while walking. A Main purpose is the development of an indoor localization system embedded in shoes that periodically broadcasts a digital RFID as the bearer walks. Results are encouraging and real life test are conducted on the first series of prototypes.

Energy harvesting from quasi-static deformations via bilaterally constrained strips

2018 ◽  
Vol 29 (18) ◽  
pp. 3572-3581
Author(s):  
Suihan Liu ◽  
Ali Imani Azad ◽  
Rigoberto Burgueño
Keyword(s):  
Energy Harvesting ◽  
Low Power ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Energy Resource ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Power Budget ◽  
Piezoelectric Energy ◽  
Static Conditions

Piezoelectric energy harvesting from ambient vibrations is well studied, but harvesting from quasi-static responses is not yet fully explored. The lack of attention is because quasi-static actions are much slower than the resonance frequency of piezoelectric oscillators to achieve optimal outputs; however, they can be a common mechanical energy resource: from large civil structure deformations to biomechanical motions. The recent advances in bio-micro-electro-mechanical systems and wireless sensor technologies are motivating the study of piezoelectric energy harvesting from quasi-static conditions for low-power budget devices. This article presents a new approach of using quasi-static deformations to generate electrical power through an axially compressed bilaterally constrained strip with an attached piezoelectric layer. A theoretical model was developed to predict the strain distribution of the strip’s buckled configuration for calculating the electrical energy generation. Results from an experimental investigation and finite element simulations are in good agreement with the theoretical study. Test results from a prototyped device showed that a peak output power of 1.33 μW/cm2 was generated, which can adequately provide power supply for low-power budget devices. And a parametric study was also conducted to provide design guidance on selecting the dimensions of a device based on the external embedding structure.

scholarly journals Hollow Piezoelectric Ceramic Fibers for Energy Harvesting Fabrics

2013 ◽  
Vol 8 (1) ◽  
pp. 155892501300800
Author(s):  
François M. Guillot ◽  
Haskell W. Beckham ◽  
Johannes Leisen
Keyword(s):  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Mechanical Energy ◽  
Electrical Power ◽  
Electrical Energy ◽  
Lead Zirconate ◽  
Ceramic Fibers ◽  
Power Sources ◽  
Electromechanical Performance ◽  
Alternative Power

In the past few years, the growing need for alternative power sources has generated considerable interest in the field of energy harvesting. A particularly exciting possibility within that field is the development of fabrics capable of harnessing mechanical energy and delivering electrical power to sensors and wearable devices. This study presents an evaluation of the electromechanical performance of hollow lead zirconate titanate (PZT) fibers as the basis for the construction of such fabrics. The fibers feature individual polymer claddings surrounding electrodes directly deposited onto both inside and outside ceramic surfaces. This configuration optimizes the amount of electrical energy available by placing the electrodes in direct contact with the surface of the material and by maximizing the active piezoelectric volume. Hollow fibers were electroded, encapsulated in a polymer cladding, poled and characterized in terms of their electromechanical properties. They were then glued to a vibrating cantilever beam equipped with a strain gauge, and their energy harvesting performance was measured. It was found that the fibers generated twice as much energy density as commercial state-of-the-art flexible composite sensors. Finally, the influence of the polymer cladding on the strain transmission to the fiber was evaluated. These fibers have the potential to be woven into fabrics that could harvest mechanical energy from the environment and could eventually be integrated into clothing.

Open-book-like triboelectric nanogenerators based on low-frequency roll–swing oscillators for wave energy harvesting

Nanoscale ◽  
2019 ◽  
Vol 11 (15) ◽  
pp. 7199-7208 ◽  
Author(s):  
Wei Zhong ◽  
Liang Xu ◽  
Xiaodan Yang ◽  
Wei Tang ◽  
Jiajia Shao ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Wave Energy ◽  
Low Frequency ◽  
Open Book ◽  
Marine Systems ◽  
Highly Effective ◽  
Self Powered ◽  
Triboelectric Nanogenerators ◽  
Effective Wave

Open-book-like triboelectric nanogenerators enable highly effective wave energy harvesting with enhanced power and charge output for self-powered marine systems.

Electrical performance results of an energy efficient building with an integrated photovoltaic system

2010 ◽  
Vol 21 (3) ◽  
pp. 2-8 ◽  
Author(s):  
Sosten Ziuku ◽  
Edson L. Meyer
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Electrical Power ◽  
Electrical Energy ◽  
Photovoltaic System ◽  
Electrical Performance ◽  
Solar Panels ◽  
Building Integrated Photovoltaics ◽  
The North ◽  
Indoor And Outdoor

A 3.8 kW rooftop photovoltaic generator has been installed on an energy efficient house built at the University of Fort Hare, Alice campus, South Africa. The system, located on the north facing roof, started generating electrical power in February 2009. In addition to providing electrical energy, the photovoltaic panels also act as the building roofing material. An instrumentation and data acquisition system was installed to record the indoor and outdoor ambient temperature, indoor and outdoor relative humidity, wind speed and direction, solar irradiance, electrical energy produced by the solar panels and the household energy consumption. This paper presents the initial results of the electrical performance of the building integrated photovoltaics (BIPV) generator and energy consumption patterns in the energy efficient house.

Non-Linear Modeling and Analysis of Composite Helicopter Blade for Piezoelectric Energy Harvesting

2012 ◽  
Author(s):  
Wander G. R. Vieira ◽  
Fred Nitzsche ◽  
Carlos De Marqui
Keyword(s):  
Energy Harvesting ◽  
Electrical Power ◽  
Electrical Energy ◽  
Piezoelectric Energy Harvesting ◽  
Resistive Load ◽  
Linear Modeling ◽  
Modeling And Analysis ◽  
Helicopter Blade ◽  
Piezoelectric Energy ◽  
Non Linear

Converting aeroelastic vibrations into electricity for low-power generation has received growing attention over the past few years. Helicopter blades with embedded piezoelectric elements can provide electrical energy to power small electronic components. In this paper, the non-linear modeling and analysis of an electromechanically coupled cantilevered helicopter blade is presented for piezoelectric energy harvesting. A resistive load is considered in the electrical domain of the problem in order to quantify the electrical power output. The non-linear electromechanical model is derived based on the Variational-Asymptotic Method (VAM). The coupled non-linear rotary system is solved in the time-domain. A generalized-α integration method is used to guarantee numerical stability, adding numerical damping at high frequencies. The electromechanical behavior of the coupled rotating blade is investigated for increasing rotating speeds (stiffening effect).

scholarly journals ENERGY HARVESTING TECHNIQUES IN WIRELESS SENSOR NETWORKS

2018 ◽  
Vol 17 (2) ◽  
pp. 117
Author(s):  
Tatjana Nikolić ◽  
Mile Stojčev ◽  
Goran Nikolić ◽  
Goran Jovanović
Keyword(s):  
Wireless Sensor Networks ◽  
Sensor Networks ◽  
Energy Harvesting ◽  
Electrical Power ◽  
Electrical Energy ◽  
Wireless Sensor ◽  
Design Solution ◽  
Basic Operation ◽  
Alternative Source ◽  
Power Sources

Batteries are the main source of energy for low-power electronics such as micro-electro mechanical systems (MEMS), wireless sensor networks, embedded devices for remote sensing and control, etc. With the limited capacity of finite power sources and the need for supplying energy for the lifetime of a system/device there is a requirement for self-powered devices. Using conventional batteries is not always good design solution because batteries require human intervention to replace them (very often in hard-accessible and harsh-environmental conditions). Therefore, acquiring the electrical power, by using an alternative source of energy that is needed to operate these devices is a major concern. The process of extracting energy from the surrounding environment and converting it into consumable electrical energy is known as energy harvesting or power scavenging. The energy harvesting sources can be used to increase the lifetime and capability of the devices by either replacing or augmenting the battery usage. There are various forms of energy that can be scavenged, like solar, mechanical, thermal, and electromagnetic. Nowadays, there is a big interest in the field of research related to energy harvesting. This paper represents a survey for identifying the sources of energy harvesting and describes the basic operation of principles of the most common energy harvester. As first, we present, in short, the conversion principles of single energy source harvesting systems and point to their benefits and limitations in their usage. After that, hybrid structures of energy harvesters which simultaneously combine scavenged power from different ambient sources (solar, thermoelectric, electromagnetic), with aim to support higher load at the output, are considered.

Sign in / Sign up

Export Citation Format

Share Document