scholarly journals Low-temperature combustion of methane over graphene templated Co3O4 defective-nanoplates

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Dian Gong ◽  
Gaofeng Zeng
Keyword(s):  
Low Temperature ◽  
Transition Metal Oxides ◽  
Active Oxygen Species ◽  
Low Cost ◽  
Thermal Reduction ◽  
Low Temperature Combustion ◽  
Solid Catalysts ◽  
Intermittent Feeding ◽  
Co Precipitation ◽  
Catalytic Combustion Of Methane

AbstractTransition metal oxides are the potential catalysts to replace noble-metal based catalyst for the catalytic combustion of methane due to the tolerable reactivity and low cost. However, these catalysts are challenged by the low temperature reactivity. Herein, the surface defective Co3O4 nanoplates are realized through a facile co-precipitation and thermal reduction method with the association of GO. The resultant catalysts (CoGO50) demonstrate a superior low-temperature reactivity for the methane oxidation to CO2 and H2O in comparison with the common Co3O4 catalyst. The reliable stability of CoGO50 catalyst was proved by 80 h testing with intermittent feeding of water vapor. The experimental analysis demonstrates that the presence of a small amount of GO significantly affects the catalysts in surface valence state, active oxygen species and surface oxygen vacancies through reacting with the cobalt oxide as a reductant. Moreover, GO plays as 2D confine template to form smaller and thinner nanoplates. This work provides a facile method to control the surface properties of catalyst not only for Co3O4 based catalysts but also for wider solid catalysts.

scholarly journals Low Temperature Combustion Processed Stable Al Doped ZnO Thin Film Transistor: Process Extendable up to Flexible Devices

2016 ◽  
Vol 3 (1) ◽  
pp. 14-23 ◽  
Author(s):  
Venkateshwarlu Sarangi ◽  
Srinivas Gandla
Keyword(s):  
Thin Film ◽  
Low Temperature ◽  
Defect Density ◽  
Low Cost ◽  
Flexible Substrate ◽  
Thin Film Transistor ◽  
Research Work ◽  
Low Temperature Combustion ◽  
Electrical Stability ◽  
Solution Processed

We report combustion synthesis of polycrystalline Aluminium doped zinc oxide (AZO) at low temperature for next generation low cost, flexible thin film transistor (TFT) application. Solution processed AZO thin film has been characterized by X ray diffraction and atomic force microscopy to confirm crystallinity. In this research work TFT with solution processed AZO as channel layer has been fabricated on both rigid and flexible substrate which exhibits excellent electrical stability and improved field effect mobility of 1.2 cm2V-1S-1, threshold voltage of 15 V and on-off ratio of 106as compared to pure ZnO based TFT. All the measurements have been carried out with varying Al concentration. Moreover, variation in defect density of AZO with Al concentration which essentially causes significant change in TFT’s performance is demonstrated by chemical composition and bonding state analysis using XPS. Our results suggest that low temperature solution processed AZO TFTs have a potential for low cost, flexible and transparent electronic applications.

scholarly journals Bimetallic Ni-Based Catalysts for CO2 Methanation: A Review

Nanomaterials ◽  
2020 ◽  
Vol 11 (1) ◽  
pp. 28
Author(s):  
Anastasios I. Tsiotsias ◽  
Nikolaos D. Charisiou ◽  
Ioannis V. Yentekakis ◽  
Maria A. Goula
Keyword(s):  
Low Temperature ◽  
Noble Metals ◽  
Recent Progress ◽  
Low Cost ◽  
Alloy Formation ◽  
Co2 Methanation ◽  
High Performing ◽  
Mobile Sources ◽  
Low Dispersion ◽  
Made In

CO2 methanation has recently emerged as a process that targets the reduction in anthropogenic CO2 emissions, via the conversion of CO2 captured from point and mobile sources, as well as H2 produced from renewables into CH4. Ni, among the early transition metals, as well as Ru and Rh, among the noble metals, have been known to be among the most active methanation catalysts, with Ni being favoured due to its low cost and high natural abundance. However, insufficient low-temperature activity, low dispersion and reducibility, as well as nanoparticle sintering are some of the main drawbacks when using Ni-based catalysts. Such problems can be partly overcome via the introduction of a second transition metal (e.g., Fe, Co) or a noble metal (e.g., Ru, Rh, Pt, Pd and Re) in Ni-based catalysts. Through Ni-M alloy formation, or the intricate synergy between two adjacent metallic phases, new high-performing and low-cost methanation catalysts can be obtained. This review summarizes and critically discusses recent progress made in the field of bimetallic Ni-M (M = Fe, Co, Cu, Ru, Rh, Pt, Pd, Re)-based catalyst development for the CO2 methanation reaction.

scholarly journals Low-temperature-processed metal oxide electron transport layers for efficient planar perovskite solar cells

Rare Metals ◽  
2021 ◽  
Author(s):  
Jia-Xing Song ◽  
Xin-Xing Yin ◽  
Zai-Fang Li ◽  
Yao-Wen Li
Keyword(s):  
Solar Cells ◽  
Electron Transport ◽  
Low Temperature ◽  
Metal Oxide ◽  
Low Cost ◽  
Perovskite Solar Cells ◽  
Transport Layer ◽  
Electron Transport Layer ◽  
Future Research ◽  
Low Temperature Preparation

Abstract As a promising photovoltaic technology, perovskite solar cells (pero-SCs) have developed rapidly over the past few years and the highest power conversion efficiency is beyond 25%. Nowadays, the planar structure is universally popular in pero-SCs due to the simple processing technology and low-temperature preparation. Electron transport layer (ETL) is verified to play a vital role in the device performance of planar pero-SCs. Particularly, the metal oxide (MO) ETL with low-cost, superb versatility, and excellent optoelectronic properties has been widely studied. This review mainly focuses on recent developments in the use of low-temperature-processed MO ETLs for planar pero-SCs. The optical and electronic properties of widely used MO materials of TiO2, ZnO, and SnO2, as well as the optimizations of these MO ETLs are briefly introduced. The commonly used methods for depositing MO ETLs are also discussed. Then, the applications of different MO ETLs on pero-SCs are reviewed. Finally, the challenge and future research of MO-based ETLs toward practical application of efficient planar pero-SCs are proposed. Graphical abstract

scholarly journals Preparation of Porous Hydroxyapatite Using Cetyl Trimethyl Ammonium Bromide as Surfactant for the Removal of Lead Ions from Aquatic Solutions

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1617
Author(s):  
Silviu-Adrian Predoi ◽  
Carmen Steluta Ciobanu ◽  
Mikael Motelica-Heino ◽  
Mariana Carmen Chifiriuc ◽  
Monica Luminita Badea ◽  
...  
Keyword(s):  
Cetyl Trimethyl Ammonium Bromide ◽  
Morphological Changes ◽  
Low Cost ◽  
Lead Ions ◽  
Ammonium Bromide ◽  
Porous Hydroxyapatite ◽  
X Ray ◽  
Composition And Structure ◽  
Cetyl Trimethyl Ammonium ◽  
Co Precipitation

In the present study, a new low-cost bioceramic nanocomposite based on porous hydroxyapatite (HAp) and cetyl trimethyl ammonium bromide (CTAB) as surfactant was successfully obtained by a simple chemical co-precipitation. The composition and structure of the HAp-CTAB were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, transmission electron microscopy (TEM), scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer, and N2 adsorption/desorption analysis. The capacity of HAp-CTAB nanocomposites to remove the lead ions from aqueous solutions was studied by adsorption batch experiments and proved by Langmuir and Freundlich models. The Pb2+ removal efficiency of HAp-CTAB biocomposite was also confirmed by non-destructive ultrasound studies. The cytotoxicity assays showed that the HAp-CTAB nanocomposites did not induce any significant morphological changes of HeLa cells after 24 h of incubation or other toxic effects. Taken together, our results suggests that the obtained porous HAp-CTAB powder could be used for the decontamination of water polluted with heavy metals, such as Pb2+.

scholarly journals Molecular Engineering for High-Performance Fullerene Broadband Photodetector

2021 ◽  
Author(s):  
Mingming Su ◽  
Yajing Hu ◽  
Ao Yu ◽  
Zhiyao Peng ◽  
Wangtao Long ◽  
...  
Keyword(s):  
Electron Transfer ◽  
Low Temperature ◽  
Electron Acceptor ◽  
Photoinduced Electron Transfer ◽  
High Performance ◽  
Organic Molecules ◽  
Low Cost ◽  
Molecular Engineering ◽  
Temperature Requirement ◽  
High Flexibility

Broadband photodetectors fabricated with organic molecules have the advantages of low cost, high flexibility, easy processing and low-temperature requirement. Fullerene molecules, due to the electron acceptor and photoinduced electron transfer...

scholarly journals Influence of Co-Precipitation Agent on the Structure, Texture and Catalytic Activity of Au-CeO2 Catalysts in Low-Temperature Oxidation of Benzyl Alcohol

Catalysts ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 641
Author(s):  
Lukasz Wolski ◽  
Grzegorz Nowaczyk ◽  
Stefan Jurga ◽  
Maria Ziolek
Keyword(s):  
Gold Nanoparticles ◽  
Catalytic Activity ◽  
Low Temperature ◽  
Benzyl Alcohol ◽  
Low Temperature Oxidation ◽  
Temperature Oxidation ◽  
Oxidation Of Benzyl Alcohol ◽  
Key Factor ◽  
Au Particle Size ◽  
Co Precipitation

The aim of the study was to establish the influence of a co-precipitation agent (i.e., NaOH–immediate precipitation; hexamethylenetetramine/urea–gradual precipitation and growth of nanostructures) on the properties and catalytic activity of as-synthesized Au-CeO2 nanocomposites. All catalysts were fully characterized with the use of XRD, nitrogen physisorption, ICP-OES, SEM, HR-TEM, UV-vis, XPS, and tested in low-temperature oxidation of benzyl alcohol as a model oxidation reaction. The results obtained in this study indicated that the type of co-precipitation agent has a significant impact on the growth of gold species. Immediate co-precipitation of Au-CeO2 nanostructures with the use of NaOH allowed obtainment of considerably smaller and more homogeneous in size gold nanoparticles than those formed by gradual co-precipitation and growth of Au-CeO2 nanostructures in the presence of hexamethylenetetramine or urea. In the catalytic tests, it was established that the key factor promoting high activity in low-temperature oxidation of benzyl alcohol was size of gold nanoparticles. The highest conversion of the alcohol was observed for the catalyst containing the smallest Au particle size (i.e., Au-CeO2 nanocomposite prepared with the use of NaOH as a co-precipitation agent).

Sign in / Sign up

Export Citation Format

Share Document