scholarly journals Irreversibility effects in peristaltic transport of hybrid nanomaterial in the presence of heat absorption

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Samreen Sheriff ◽  
S. Ahmad ◽  
N. A. Mir
Keyword(s):  
Pure Water ◽  
Flow Analysis ◽  
Flow Characteristics ◽  
Peristaltic Transport ◽  
Hybrid Nanofluid ◽  
Heat Absorption ◽  
Convergent Channel ◽  
Hybrid Nanomaterial ◽  
Entropy Effects ◽  
Uniform Channel

AbstractThe nano heat transport has gained much significance in recent era. The micro-level devices are enganged succssfully in diverse fields like electronics, biomedical, navel structures, manufacturing, transportation, and automotive industries in order to improve the heat transfer for cooling and heating. Owing to this fact, the current article illustrates the features of irreversibility and thermal jump in peristaltic transport of hybrid nanoliquid. Here, water is used as base liquid while nanoparticles include polystyrene and graphene oxide. The flow is carried out in a non-uniform channel where the walls of channel flexible nature. Additionally, magnetic field impacts on flow and Joule heating analysis are examined. The aspect featuring heat absorption is introduced. Nanoparticle's shapes effect is also incorporated in flow analysis. Under the consideration of small Rynold number and long wavelength, the relevent equations are reduced by implementing non-dimensional variables. Involved pertinent parameters influence the peristaltic flow characteristics are displayed graphically and discussed concisely. The result indicates that temperature curves are dominant for pure water as compared to P/water nanofluid and P-GO/water hybrid nanofluid. Moreover, the convergent channel shows least entropy effects and extreme effects are noted for divergent case whereas uniform channel stays behind the divergent one.

Effects of Al2O3–Cu/water hybrid nanofluid on heat transfer and flow characteristics in turbulent regime

2015 ◽  
Vol 26 (04) ◽  
pp. 1550047 ◽  
Author(s):  
Behrouz Takabi ◽  
Hossein Shokouhmand
Keyword(s):  
Heat Transfer ◽  
Friction Factor ◽  
Pure Water ◽  
Flow Characteristics ◽  
Hydrodynamic Performance ◽  
Hybrid Nanofluid ◽  
Turbulent Regime ◽  
Average Increase ◽  
Finite Volume Discretization ◽  
Wide Range

In this paper, forced convection of a turbulent flow of pure water, Al 2 O 3/water nanofluid and Al 2 O 3– Cu /water hybrid nanofluid (a new advanced nanofluid composited of Cu and Al 2 O 3 nanoparticles) through a uniform heated circular tube is numerically analyzed. This paper examines the effects of these three fluids as the working fluids, a wide range of Reynolds number (10 000 ≤ Re ≤ 10 0000) and also the volume concentration (0% ≤ ϕ ≤ 2%) on heat transfer and hydrodynamic performance. The finite volume discretization method is employed to solve the set of the governing equations. The results indicate that employing hybrid nanofluid improves the heat transfer rate with respect to pure water and nanofluid, yet it reveals an adverse effect on friction factor and appears severely outweighed by pressure drop penalty. However, the average increase of the average Nusselt number (when compared to pure water) in Al 2 O 3– Cu /water hybrid nanofluid is 32.07% and the amount for the average increase of friction factor would be 13.76%.

Experimental Study on the Specific Heat Capacity Measurement of Water-Based Al2O3-Cu Hybrid Nanofluid by using Differential Thermal Analysis Method

2019 ◽  
Vol 15 ◽  
Author(s):  
Andaç Batur Çolak ◽  
Oğuzhan Yıldız ◽  
Mustafa Bayrak ◽  
Ali Celen ◽  
Ahmet Selim Dalkılıç ◽  
...  
Keyword(s):  
Heat Capacity ◽  
Specific Heat ◽  
Specific Heat Capacity ◽  
Thermophysical Properties ◽  
Volume Concentration ◽  
Pure Water ◽  
Heat Capacity Measurement ◽  
Experimental Results ◽  
Hybrid Nanofluid ◽  
Capacity Measurement

Background: Researchers working in the field of nanofluid have done many studies on the thermophysical properties of nanofluids. Among these studies, the number of studies on specific heat are rather limited. In the study of the heat transfer performance of nanofluids, it is necessary to increase the number of specific heat studies, whose subject is one of the important thermophysical properties. Objective: The authors aimed to measure the specific heat values of Al2O3/water, Cu/water nanofluids and Al2O3-Cu/water hybrid nanofluids using the DTA method, and compare the results with those frequently used in the literature. In addition, this study focuses on the effect of temperature and volume concentration on specific heat. Method: The two-step method was used in the preparation of nanofluids. The pure water selected as the base fluid was mixed with the Al2O3 and Cu nanoparticles and Arabic Gum as the surfactant, firstly mixed in the magnetic stirrer for half an hour. It was then homogenized for 6 hours in the ultrasonic homogenizer. Results: After the experiments, the specific heat of nanofluids and hybrid nanofluid were compared and the temperature and volume concentration of specific heat were investigated. Then, the experimental results obtained for all three fluids were compared with the two frequently used correlations in the literature. Conclusion: Specific heat capacity increased with increasing temperature, and decreased with increasing volume concentration for three tested nanofluids. Cu/water has the lowest specific heat capacity among all tested fluids. Experimental specific heat capacity measurement results are compared by using the models developed by Pak and Cho and Xuan and Roetzel. According to experimental results, these correlations can predict experimental results within the range of ±1%.

scholarly journals Random pore structure and REV scale flow analysis of engine particulate filter based on LBM

Open Physics ◽  
2020 ◽  
Vol 18 (1) ◽  
pp. 881-896
Author(s):  
Chunrui Wu ◽  
Tiechen Zhang ◽  
Jiale Fu ◽  
Xiaori Liu ◽  
Boxiong Shen
Keyword(s):  
Single Channel ◽  
Flow Analysis ◽  
Flow Characteristics ◽  
Axial Direction ◽  
Particulate Filter ◽  
Random Structure ◽  
Structure Generation ◽  
Inlet Flow ◽  
Random Structures ◽  
Boltzmann Method

Abstract In this article, lattice Boltzmann method (LBM) is used to simulate the multi-scale flow characteristics of the engine particulate filter at the pore scale and the representative elementary volume (REV) scale, respectively. Four kinds of random wall-pore structures are considered, which are circular random structure, square random structure, isotropic quartet structure generation set (QSGS), and anisotropic QSGS, with difference analysis done. In terms of the REV scale, the influence of different inlet flow velocities and wall permeabilities on the flow in single channel is analyzed. The result indicates that the internal seepage laws of random structures constructed in this article and single channel are in accordance with Darcy’s law. Circular random structure has better permeability than square random structure. Isotropic QSGS has better fluidity than anisotropic one. The flow in single channel is similar to Poiseuille flow. The flow lines in the channel are complicated and a large number of vortices appear at the ends of channel with high inlet flow rate. With the increase of inlet velocity, the static pressure in channel gradually increases along the axial direction as well as the seepage velocity. The temperature field in the channel becomes more uniform as the flow velocity increases, and the higher temperature distribution appears on the wall of the porous media.

scholarly journals Simulation approach on turbulent thermal performance factor of Al2O3-Cu/water hybrid nanofluid in circular and non-circular ducts

2021 ◽  
Vol 3 (3) ◽  
Author(s):  
Ing Jiat Kendrick Wong ◽  
Ngieng Tze Angnes Tiong
Keyword(s):  
Heat Transfer ◽  
Reynolds Number ◽  
Pressure Drop ◽  
Thermal Performance ◽  
Heat Transfer Performance ◽  
Pure Water ◽  
Hybrid Nanofluid ◽  
Performance Factor ◽  
Thermal Performance Factor ◽  
The Heat Transfer Coefficient

AbstractThis paper presents the numerical study of thermal performance factor of Al2O3-Cu/water hybrid nanofluid in circular and non-circular ducts (square and rectangular). Turbulent regime is studied with the Reynolds number ranges from 10000 to 100000. The heat transfer performance and flow behaviour of hybrid nanofluid are investigated, considering the nanofluid volume concentration between 0.1 and 2%. The thermal performance factor of hybrid nanofluid is evaluated in terms of performance evaluation criteria (PEC). This present numerical results are successfully validated with the data from the literature. The results indicate that the heat transfer coefficient and Nusselt number of Al2O3-Cu/water hybrid nanofluid are higher than those of Al2O3/water nanofluid and pure water. However, this heat transfer enhancement is achieved at the expense of an increased pressure drop. The heat transfer coefficient of 2% hybrid nanofluid is approximately 58.6% larger than the value of pure water at the Reynolds number of 10000. For the same concentration and Reynolds number, the pressure drop of hybrid nanofluid is 4.79 times higher than the pressure drop of water. The heat transfer performance is the best in the circular pipe compared to the non-circular ducts, but its pressure drop increment is also the largest. The hybrid nanofluid helps to improve the problem of low heat transfer characteristic in the non-circular ducts. In overall, the hybrid nanofluid flow in circular and non-circular ducts are reported to possess better thermal performance factor than that of water. The maximum attainable PEC is obtained by 2% hybrid nanofluid in the square duct at the Reynolds Number of 60000. This study can help to determine which geometry is efficient for the heat transfer application of hybrid nanofluid.

Quantitative Experimental Study of SiO2-Water Nanofluids on Backward-Facing Step Flow under Low Reynolds Number

2018 ◽  
Vol 916 ◽  
pp. 221-225
Author(s):  
Ji Zu Lv ◽  
Liang Yu Li ◽  
Cheng Zhi Hu ◽  
Min Li Bai ◽  
Sheng Nan Chang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thermal Conductivity ◽  
Reynolds Number ◽  
Volume Fraction ◽  
Pure Water ◽  
Experimental Studies ◽  
Flow Characteristics ◽  
Thermal Engineering ◽  
Heat Transfer Medium ◽  
Step Flow

Nanofluids is an innovative study of nanotechnology applied to the traditional field of thermal engineering. It refers to the metal or non-metallic nanopowder was dispersed into water, alcohol, oil and other traditional heat transfer medium, to prepared as a new heat transfer medium with high thermal conductivity. The role of nanofluids in strengthening heat transfer has been confirmed by a large number of experimental studies. Its heat transfer mechanism is mainly divided into two aspects. On the one hand, the addition of nanoparticles enhances the thermal conductivity. On the other hand, due to the interaction between the nanoparticles and base fluid causing the changes in the flow characteristics, which is also the main factor affecting the heat transfer of nanofluids. Therefore, a intensive study on the flow characteristics of nanofluids will make the study of heat transfer more meaningful. In this experiment, the flow characteristics of SiO2-water nanofluids in two-dimensional backward step flow are quantitatively studied by PIV. The results show that under the same Reynolds number, the turbulence of nanofluids is larger than that of pure water. With the increase of nanofluids volume fraction, the flow characteristics are constantly changing. The quantitative analysis proved that the nanofluids disturbance was enhanced compared with the base liquid, which resulting in the heat transfer enhancement.

scholarly journals CFD Analysis of the Optimization of Length of Capillary Tube for a Vapor Compression Refrigeration System

2021 ◽  
Vol 9 (8) ◽  
pp. 2567-2578
Author(s):  
Ms. K. P. Bhangle
Keyword(s):  
Capillary Tube ◽  
Flow Analysis ◽  
Small Diameter ◽  
Flow Characteristics ◽  
Working Fluid ◽  
Vapor Compression ◽  
Adiabatic Flow ◽  
Ansys Cfx ◽  
Vapor Compression Refrigeration ◽  
R 134A

Abstract: The capillary tube is commonly employed in refrigerant flow control systems. As a result, the capillary tube's performance is optimal for good refrigerant flow. Many scholars concluded performance utilising experimental, theoretical, and analysis-based methods. This paper examines the flow analysis of a refrigerant within a capillary tube under adiabatic flow circumstances. For a given mass flow rate, the suggested model can predict flow characteristics in adiabatic capillary tubes. In the current work, R-134a refrigerant has been replaced by R600a refrigerant as a working fluid inside the capillary tube, and the capillary tube design has been modified by altering length and diameter, which were obtained from reputable literature. The analysis is carried out using the ANSYS CFX 16.2 software. The results show thatutilising a small diameter and a long length (R600a refrigerant flow) is superior to the present helical capillary tube. The most appropriate helical coiled design with a diameter of 0.8 mm and a length of 3 m is proposed. Keywords: Capillary Tube, Condenser, Refrigeration effect, CFD.

Wave Propagation and Power Flow Analysis of Sandwich Structures With Internal Absorbers

2014 ◽  
Vol 136 (4) ◽  
Author(s):  
J. S. Chen ◽  
R. T. Wang
Keyword(s):  
Wave Propagation ◽  
Power Flow ◽  
Wave Attenuation ◽  
Sandwich Structures ◽  
Flow Analysis ◽  
Flow Characteristics ◽  
Continuum Models ◽  
Sandwich Beams ◽  
The Core ◽  
In Series

This study examines wave attenuation and power flow characteristics of sandwich beams with internal absorbers. Two types of absorbing systems embedded in the core are considered, namely, a conventional spring-mass-dashpot system having a mass with a spring and a dashpot in parallel, and a relaxation system containing an additional relaxation spring added in series with the dashpot. Analytical continuum models used for interpreting the attenuation behavior of sandwich structures are presented. Through the analysis of the power flowing into the structure, the correlation of wave attenuation and energy blockage is revealed. The reduction in the power flow indicates that some amount of energy produced by the external force can be effectively obstructed by internal absorbers. The effects of parameters on peak attenuation, bandwidth, and power flow are also studied.

Flow Analysis of Spray Jet and Direct Jet Nozzle for Fire Water Monitor

2010 ◽  
Vol 139-141 ◽  
pp. 913-916 ◽  
Author(s):  
Guo Liang Hu ◽  
Wei Gang Chen ◽  
Zhi Gang Gao
Keyword(s):  
Flow Analysis ◽  
Flow Characteristics ◽  
Flow Simulation ◽  
Jet Flow ◽  
Extended Length ◽  
Jet Nozzle ◽  
Simulation Results ◽  
Steady Velocity ◽  
Nozzle Structure

In order to investigate the influence rules between the jet nozzle of fire water monitor and the jet performances, two typical jet nozzle, the spray jet and direct jet nozzle was designed to analysis the jet flow characteristics. Flow simulation of the jet nozzle was completed using fluent kits. The outlet velocity of the spray jet nozzle and direct jet nozzle were investigated in detail, and the influence rules of the nozzle structure on the outlet velocity was also discussed. The simulation results show that the steady velocity of the jet nozzle is about 34m/s that coinciding the contour magnitude, and the better extended length of the direct jet nozzle is about 50mm length that can improve the jet performances. The results can verify the reasonableness of the designed nozzle, it also can optimize the nozzle structure and increase the jet performance of the fire water monitor.

Investigations on the Rotordynamic Characteristics of a Hole-Pattern Seal Using Transient CFD and Periodic Circular Orbit Model

2011 ◽  
Vol 133 (4) ◽  
Author(s):  
Xin Yan ◽  
Jun Li ◽  
Zhenping Feng
Keyword(s):  
Circular Orbit ◽  
Flow Analysis ◽  
Three Dimensional ◽  
Flow Characteristics ◽  
Numerical Approach ◽  
Deformation Method ◽  
Rotordynamic Coefficients ◽  
Forward Orbit ◽  
Reaction Forces ◽  
Orbit Model

Numerical investigations on the rotordynamic characteristics of a typical hole-pattern seal using transient three-dimensional Reynolds-averaged Navier–Stokes (RANS) solution and the periodic circular orbit model were conducted in this work. The unsteady solutions combined with mesh deformation method were utilized to solve the three-dimensional RANS equations and obtain the transient reaction forces on a typical hole-pattern seal rotor at five different excitation frequencies. The relation between the periodic reaction forces and frequency dependent rotordynamic coefficients of the hole-pattern seal was obtained by considering the rotor with a periodic circular orbit (including forward orbit and backward orbit) of the seal center. The rotordynamic coefficients of the hole-pattern seal were then solved based on the obtained unsteady reaction forces and presented numerical method. Compared with the experimental data, the predicted rotordynamic coefficients of the hole-pattern seal are more agreeable with the experiment than that of the ISO-temperature (ISOT) bulk flow analysis and numerical approach with one-direction-shaking model. Furthermore, the unsteady leakage flow characteristics in the hole-pattern seal were also illustrated and discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document