scholarly journals Out-of-plane faradaic ion concentration polarization: stable focusing of charged analytes at a three-dimensional porous electrode

Lab on a Chip ◽  
2022 ◽  
Author(s):  
Beatrise Berzina ◽  
Sungu Kim ◽  
Umesha Peramune ◽  
Kumar Saurabh ◽  
Baskar Ganapathysubramanian ◽  
...  

Ion concentration polarization (ICP) accomplishes preconcentration for bioanalysis by localized depletion of electrolyte ions, thereby generating a gradient in electric field strength that facilitates electrokinetic focusing of charged analytes by...

2021 ◽  
Author(s):  
Beatrise Berzina ◽  
Sungu Kim ◽  
Umesha Peramune ◽  
Kumar Saurabh ◽  
Baskar Ganapathysubramanian ◽  
...  

Ion concentration polarization (ICP) accomplishes preconcentration for bioanalysis by localized depletion of electrolyte ions, thereby generating a gradient in electric field strength that facilitates electrokinetic focusing of charged analytes by their electromigration against opposing fluid flow. Such ICP focusing has been shown to accomplish up to a million-fold enrichment of nucleic acids and proteins in single-stage preconcentrators. However, the rate at which the sample volume is swept is limited, requiring several hours to achieve these high enrichment factors. This limitation is caused by two factors. First, an ion depleted zone (IDZ) formed at a planar membrane or electrode may not extend across the full channel cross section, thereby allowing the analyte “leak” past the IDZ. Second, within the IDZ, large fluid vortices lead to mixing, which decreases the efficiency of analyte enrichment and worsens with increased channel dimensions. Here, we address these challenges with faradaic ICP (fICP) at a three-dimensional (3D) electrode comprising metallic microbeads. This 3D-electrode distributes the IDZ, and therefore, the electric field gradient utilized for counter-flow focusing across the full height of the fluidic channel, and its large area, microstructured surface supports smaller vortices. An additional bed of insulating microbeads restricts flow patterns and supplies a large area for surface conduction of ions through the IDZ. Finally, the resistance of this secondary bed enhances focusing by locally strengthening sequestering forces. This easy-to-build platform lays a foundation for the integration of enrichment with user-defined packed bed and electrode materials.


2022 ◽  
Author(s):  
Beatrise Berzina ◽  
Sungu Kim ◽  
Umesha Peramune ◽  
Kumar Saurabh ◽  
Baskar Ganapathysubramanian ◽  
...  

Ion concentration polarization (ICP) accomplishes preconcentration for bioanalysis by localized depletion of electrolyte ions, thereby generating a gradient in electric field strength that facilitates electrokinetic focusing of charged analytes by their electromigration against opposing fluid flow. Such ICP focusing has been shown to accomplish up to a million-fold enrichment of nucleic acids and proteins in single-stage preconcentrators. However, the rate at which the sample volume is swept is limited, requiring several hours to achieve these high enrichment factors. This limitation is caused by two factors. First, an ion depleted zone (IDZ) formed at a planar membrane or electrode may not extend across the full channel cross section under the flow rate employed for focusing, thereby allowing the analyte “leak” past the IDZ. Second, within the IDZ, large fluid vortices lead to mixing, which decreases the efficiency of analyte enrichment and worsens with increased channel dimensions. Here, we address these challenges with faradaic ICP (fICP) at a three-dimensional (3D) electrode comprising metallic microbeads. This 3D-electrode distributes the IDZ, and therefore, the electric field gradient utilized for counter-flow focusing across the full height of the fluidic channel, and its large area, microstructured surface supports smaller vortices. An additional bed of insulating microbeads restricts flow patterns and supplies a large area for surface conduction of ions through the IDZ. Finally, the resistance of this secondary bed enhances focusing by locally strengthening sequestering forces. This easy-to-build platform lays a foundation for the integration of enrichment with user-defined packed bed and electrode materials.


Lab on a Chip ◽  
2014 ◽  
Vol 14 (4) ◽  
pp. 681-685 ◽  
Author(s):  
Brendan D. MacDonald ◽  
Max M. Gong ◽  
Pei Zhang ◽  
David Sinton

2020 ◽  
Vol 128 (1) ◽  
pp. 95
Author(s):  
Н.Н. Розанов

Using the analogy with the electrostatics, in general, the problem of the spatial (three-dimensional) distribution of the electric area of the radiation pulses, which is defined as the time integral of the electric field strength, is resolved in general case when the radiation is generated by the movement of electric charges in a vacuum. The possibility of the formation of unipolar radiation pulses, in which the main polarization component does not change sign during the pulse, is demonstrated.


Micromachines ◽  
2019 ◽  
Vol 10 (9) ◽  
pp. 562 ◽  
Author(s):  
Jie Li ◽  
Dilin Chen ◽  
Jian Ye ◽  
Lai Zhang ◽  
Teng Zhou ◽  
...  

The problem of water shortage needs to be solved urgently. The membrane-embedded microchannel structure based on the ion concentration polarization (ICP) desalination effect is a potential portable desalination device with low energy consumption and high efficiency. The electroosmotic flow in the microchannel of the cation exchange membrane and the desalination effect of the system are numerically analyzed. The results show that when the horizontal electric field intensity is 2 kV/m and the transmembrane voltage is 400 mV, the desalting efficiency reaches 97.3%. When the electric field strength increases to 20 kV/m, the desalination efficiency is reduced by 2%. In terms of fluid motion, under the action of the transmembrane voltage, two reverse eddy currents are formed on the surface of the membrane due to the opposite electric field and pressure difference on both sides of the membrane, forming a pumping effect. The electromotive force in the channel exhibits significant pressure-flow characteristics with a slip boundary at a speed approximately six times that of a non-membrane microchannel.


2020 ◽  
Vol 11 (21) ◽  
pp. 5547-5558 ◽  
Author(s):  
Collin D. Davies ◽  
Richard M. Crooks

Electric field gradients formed by electrochemical processes at bipolar electrodes continuously direct the flow of charged objects in microfluidic devices.


2021 ◽  
Author(s):  
Michael Monaghan

Defined ordered structures for biomaterials and tissue engineering applications can be achieved by a variety of techniques, one of which includes the electrohydrodynamic (EHD)-based application of melt electrowriting (MEW), the extrusion of a molten polymer filament under pressure across a defined electric field. In this study, we investigate how to translate small fibremeshes which are usually formed on flat surfaces, to curved contours that would have more applicability to human anatomical structures. By modelling the electric field strength associated with the MEW process, we found that incorporation of a non conductive three-dimensional (3D) custom printed mould on the conductive collector plate offers the ability to accurately print patterns on non-flat surfaces successfully. Importantly, while the electric field strength is a constant in the MEW process; the electrostatic behaviour of the deposited polymer has the greatest impact on the accuracy of fibre patterning and stacking. Consequently, controlled fibre deposition was exhibited, provided that a constant electrical field strength and a continuous vertical distance between the nozzle and the mould is maintained.Overall, this study establishes the groundwork to support further developments in MEW technologies, from flat to anatomically relevant 3D structures in the fields of regenerative medicine and biofabrication.


Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 337
Author(s):  
Akihiro Mochizuki

SSD-liquid crystal panels’ retardation switching dynamic behaviors have been investigated from their in-plane and out-of-plane retardation switching behaviors. In-plane-only and a mixture between in-plane and out-of-plane retardation switching behaviors are highly related to the initial smectic liquid crystal molecular stacking configurations. With uniformly stacked configuration, a completely symmetric retardation switching, as well as light throughput behavior, was obtained. With a slight twisted stacking configuration, the retardation switching behavior is dependent on the applied electric field strength, which may change the initial molecular stacking configuration, resulting in either symmetric or asymmetric retardation switching. When the molecular stacking has twisted heavily, the obtained retardation switching showed asymmetric behavior regardless of the applied electric field strength.


2016 ◽  
Vol 136 (10) ◽  
pp. 1420-1421
Author(s):  
Yusuke Tanaka ◽  
Yuji Nagaoka ◽  
Hyeon-Gu Jeon ◽  
Masaharu Fujii ◽  
Haruo Ihori

Sign in / Sign up

Export Citation Format

Share Document