scholarly journals Lighting conditions as the occupational health related issue – case study

2022 ◽  
Vol 354 ◽  
pp. 00059
Author(s):  
Luiza Dębska ◽  
Anita Białek

The paper deals with the important element of proper lighting conditions at a workplace. The case study has been focused on the intelligent building “Energis” of Kielce University of Technology, where the experimental tests took place. Several groups of volunteers filled in the questionnaires related to their subjective feelings of lighting conditions in lecture rooms at different seasons. Simultaneously, precise measurements of lighting intensity were carried out. The comparison of the expressions of the room users and the measurements enabled to draw conclusions about the conditions provided in the intelligent building related to lighting. The study provides valuable information of lighting conditions in the modern, intelligent buildings which are more and more common throughout the world and serve various purposes such as office, educational or other public utility buildings.

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Luiza Dębska

Abstract Currently, thermal comfort and indoor air quality are essential elements in designing modern and intelligent buildings or improving existing ones, so that they would provide proper indoor conditions. The article focuses on the thermal sensations of the students of Kielce University of Technology and determining whether the given parameters of the internal environment contributed to their well-being. 164 people aged 16 - 24 participated in the study, which was conducted with the use of a microclimate meter and questionnaires. It turned out that the temperature range from 19.3 °C – 27.6 °C is acceptable and comfortable for nearly 78% of people. As a result of further analysis, it turned out that the research group definitely prefers and feels better in colder temperatures.


Materials ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2125 ◽  
Author(s):  
Janusz Tomczak ◽  
Zbigniew Pater ◽  
Tomasz Bulzak

This paper presents selected numerical and experimental results of a skew rolling process for producing balls using helical tools. The study investigates the effect of the billet’s initial temperature on the quality of produced balls and the rolling process itself. In addition, the effect of billet diameter on the quality of produced balls is investigated. Experimental tests were performed using a helical rolling mill available at the Lublin University of Technology. The experiments consisted of rolling 40 mm diameter balls with the use of two helical tools. To determine optimal rolling parameters ensuring the highest quality of produced balls, numerical modelling was performed using the finite element method in the Forge software. The numerical analysis involved the determination of metal flow kinematics, temperature and damage criterion distributions, as well as the measurement of variations in the force parameters. The results demonstrate that the highest quality balls are produced from billet preheated to approximately 1000 °C.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5727
Author(s):  
Michał Michna ◽  
Filip Kutt ◽  
Łukasz Sienkiewicz ◽  
Roland Ryndzionek ◽  
Grzegorz Kostro ◽  
...  

In this paper, the static and dynamic simulations, and mechanical-level Hardware-In-the-Loop (MHIL) laboratory testing methodology of prototype drive systems with energy-saving permanent-magnet electric motors, intended for use in modern construction cranes is proposed and described. This research was aimed at designing and constructing a new type of tower crane by Krupiński Cranes Company. The described research stage was necessary for validation of the selection of the drive system elements and confirmation of its compliance with applicable standards. The mechanical construction of the crane was not completed and unavailable at the time of testing. A verification of drive system parameters had to be performed in MHIL laboratory testing, in which it would be possible to simulate torque acting on the motor shaft. It was shown that the HIL simulation for a crane may be accurate and an effective approach in the development phase. The experimental tests of selected operating cycles of prototype crane drives were carried out. Experimental research was performed in the LINTE^2 laboratory of the Gdańsk University of Technology (Poland), where the MHIL simulator was developed. The most important component of the system was the dynamometer and its control system. Specialized software to control the dynamometer and to emulate the load subjected to the crane was developed. A series of tests related to electric motor environmental parameters was carried out.


2021 ◽  
Vol 5 (4) ◽  
pp. 25-33
Author(s):  
Yunjin Wang

As the third vital industry supporting Australia’s economic development, the education domain and related services are deserved to be emphasized. The domestic university as the major used space of the educational industry is acquiring increasingly government investments. One of the investment aspects is the improvement of safety infrastructure. By providing students and staff a convenient and safe campus experience is an effective approach to produce greater benefits. However, in most Australia universities, the safety issue is still a problem that needs to be enhanced. In this research paper, the Garden City Campus of the Queensland University of Technology is used as the case study. It will be analyzed using the methodologies of observation and survey.


2018 ◽  
pp. 75-80
Author(s):  
Kinga Koroniejko

The article presents the ways of support from European funds in the development of student competencies and organizational innovation in the field education. It is based on a case study of the project ‘Inżynieria materiałowa – inżynieria przyszłości’ (Material engineering – engineering of the future’), financed by the European Social Fund in Poland. The project was implemented at the Faculty of Mechanical Engineering of the Cracow University of Technology in the years 2012-15. The research methods used are critical analysis of literature sources, surveys and a case study of the project mentioned above.


Sign in / Sign up

Export Citation Format

Share Document