scholarly journals How to Dissect Lymphatics under Loupes for Line Production System for Multiple Lymphaticovenular Anastomosis

2020 ◽  
Vol 05 (02) ◽  
pp. e43-e48
Author(s):  
Tarek Elsayed Mohamed Eldahshoury ◽  
Shuhei Yoshida ◽  
Isao Koshima ◽  
Hirofumi Imai ◽  
Toshio Uchiki ◽  
...  
Keyword(s):  
Production System ◽  
Cost Effective ◽  
Fat Tissue ◽  
Line Production ◽  
Field Of Vision ◽  
Average Size ◽  
Novice Surgeon ◽  
Mean Time ◽  
Loupe Magnification ◽  
Selection Of

Abstract Background A surgical line production system using loupes to dissect lymphatics and veins is a cost-effective way of performing multiple lymphaticovenular anastomoses. There is an art to successful dissection of lymphatics under loupes, and selection of the correct loupe magnification is important. Therefore, the aim of this study was to provide a detailed description of how to dissect lymphatics under loupes. Patients and Methods Dissection of lymphatics under loupes was performed for a series of 13 patients. Lymphatics are transparent threadlike structures that are arranged longitudinally and may be oriented with feeding capillary vessels. At the start of dissection, it is helpful to have a reference scale in the field of vision when operating to appreciate the size of the structures seen under loupes. It is also helpful to be able to separate lymphatics from fat tissue in the background. Results Mean time for exploration under loupes was 25 ± 7 minutes; lymphatics were successfully found in 27 sites (90%) of the 30 attempted with failure to identify lymphatics in three sites (10%) and failure to identify veins in three sites (10%); the average size of the lymphatics was found to be 0.5 ± 0.2 mm. No lymphatics could be found by the microscopes after loupes exploration in two sites. Discussion Even a novice surgeon can identify lymphatics based on knowledge of the visual characteristics of these structures. However, a higher magnification is likely necessary for accurate discrimination.

Medical Literature Searches -How Many Bibliographic Databases are Needed for Sufficient Retrieval in Medical Topics?

1985 ◽  
Vol 24 (03) ◽  
pp. 163-165 ◽  
Author(s):  
K. John
Keyword(s):  
Medical Literature ◽  
Cost Effective ◽  
Medical Faculty ◽  
Bibliographic Databases ◽  
Literature Searches ◽  
Selection Of

SummaryAs many bibliographic services in medicine are offered, literature searches in eight databases at DIMDI were performed to find out which database is most important in medicine. The distribution of publications from members of the medical faculty of Frankfurt University was examined. No save prediction is possible as to which database will yield most articles. Overlapping from different databases is often rather low. The selection of an appropriate database mix for sufficient recall and in a cost-effective manner.is a task for an experienced searcher.

Teknologi Esktrasi dan Cara Pemisahannya untuk Mendapatkan Kembali Karotenoid dari Minyak Sawit : Suatu Tinjauan

2016 ◽  
Vol 9 (1) ◽  
pp. 80-95
Author(s):  
Agus Sudibyo ◽  
Sardjono Sardjono
Keyword(s):  
Vitamin A ◽  
Palm Oil ◽  
Beta Carotene ◽  
Cost Effective ◽  
Raw Material ◽  
Extraction And Separation ◽  
Molecular Product ◽  
Industrial Use ◽  
Palm Oil Mill ◽  
Selection Of

Crude palm oil (CPO)is the richest natural plant source of carotenoids in terms of retinol (pro-vitamin A) equivalent, whereas palm oil mill effluent (POME) is generated from palm oil industry that contains oil and carotenes that used to be treated before discharge. Carotenoids are importance in animals and humans for the purpose of the enhancement of immune response, conversion of vitamin A and scavenging of oxygen radicals. This component has different nutritional  functions and benefits to humaan health. The growing interest in the other natural sources of beta-carotene and growing awareness to prevent pollution has stimulated the industrial use of CPO and POME as a raw material for carotenoids extraction. Various technologies of extraction and separation have been developed in order to recover of carotenoids.This article reports on various technologies that have been developed in order to recover of carotenoids from being destroyed in commercial refining of palm oil and effects of some various treatments on the extraction end separation for carotenoid from palm oil and carotenoids concentration. Principally, there are different technologies, and there is one some future which is the use of solvent. Solvent plays important role  in the most technologiest, however the problem of solvents which are used is that they posses potentiaal fire health and environmental hazards. Hence selection of the  most safe, environmentally friendly and cost effective solvent is important to design of alternative extraction methods.Chemical molecular product design is one of the methods that are becoming more popular nowadays for finding solvent with the desired properties prior to experimental testing.ABSTRAKMinyak sawit kasar merupakan sumber karotenoid terkaya yang berasal dari tanaman sawit sebagai senyawa yang sama dengan retinol atau pro-vitamin A; sedangkan limbah pengolahan minyak sawit dihasilkan dari industri pengolahan minyak sawit yang berisi minyak dan karotene yang perlu diberi perlakuan terlebih dahulu sebelum dibuang. Karotenoid merupakan bahan penting yang diperlukan pada hewan dan manusia guna memperkuat tanggapan terhadap kekebalan, konversi ke vitamin A dan penangkapan gugus oksigen radikal. Dengan berkembangnya ketertarikan dalam mencari beta-karotene yang bersumber dari alam lain dan meningkatnya kesadaran untuk mencegah adanya pencemaran lingkungan, maka mendorong suatu industri untuk menggunakan CPO dan POME sebagai bahan baku untuk diekstrak karotenoidnya. Berbagai macam teknologi guna mengekstrak dan memisahkan karotenoid telah dikembangkan untuk mendapatkan kembali karotenoidnya. Makalah ini melaporkan dan membahas berbagai jenis teknologi yang telah dikembangkan guna mendapatkan kembali senyawa karotenoid dari kerusakan di dalam proses pemurnian minyak sawit secara komersial dan pengaruh beberapa perlakuan terhadap ekstrasi dan pemisahan karotenoid dari minyak sawit dan konsentrasi karotenoidnya. Pada prinsipnya, berbagai teknologi yang digunakan untuk mengekstrak dan memisahkan karotenoid terdapat perbedaan, dan terdapat salah satu teknologi yang digunakan untuk esktrasi dan pemisahan karotenoid adalah menggunakan bahan pelarut. Pelarut yang digunakan mempunyai peranan yang penting dalam teknologi ekstrasi; namun pelarut yang digunakan untuk mengekstrak tersebut mempunyai persoalan karena berpotensi mengganggu kesehatan dan membahayakan cemaran lingkungan. Oleh karena itu, pemilihan jenis teknologi yang aman, ramah terhadap lingkungan dan biaya yang efektif untuk penggunaan pelarut merupakan hal penting sebelum dilakukan desain metode/teknologi alternatif untuk esktrasi karotenoid. Pola produk molekuler kimia merupakan salah satu metode yang saat ini menjadi lebih populer untuk mencari pelarut dengan sifat-sifat yang dikehendaki sebelum diujicobakan. Kata kunci :    karotenoid, ekstrasi, pemisahan, teknologi, minyak sawit kasar, limbah industri pengolahan sawit.

scholarly journals Design Considerations and Selection of Cost-Effective Switched Reluctance Drive for Radiator Cooling Fans

Electronics ◽  
2021 ◽  
Vol 10 (8) ◽  
pp. 917
Author(s):  
Ickjin Son ◽  
Grace Firsta Lukman ◽  
Mazahir Hussain Shah ◽  
Kwang-Il Jeong ◽  
Jin-Woo Ahn
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Magnetic Characteristics ◽  
Switched Reluctance Motors ◽  
Switched Reluctance ◽  
Design Considerations ◽  
Cooling Fan ◽  
Cooling Fans ◽  
Power Switches ◽  
Selection Of

Switched reluctance motors (SRMs) are simple in structure, easy to manufacture, magnet-less, brushless, and highly robust compared to other AC motors which makes them a good option for applications that operate in harsh environment. However, the motor has non-linear magnetic characteristics, and it comes with various pole-phase combinations and circuit topologies that causes many difficulties in deciding on which type to choose. In this paper, the viability of SRM as a low-cost, rugged machine for vehicle radiator cooling fan is considered. First, necessary design considerations are presented, then three commonly use types of SRM are analyzed: A 3-phase 6/4, 3-phase 12/8, and a 4-phase 8/6 to find their static and dynamic characteristics so the most suitable type can be selected. Simulation results show that the 8/6 SRM produces the highest efficiency with less phase current which reduces the converter burden. However, with asymmetric half bridge converter, eight power switches are required for 8/6 SRM and thus put a burden on the overall drive cost. As a solution, the Miller converter with only six switches for four phase SRM. To verify the proposed idea, the 8/6 SRM was manufactured and tested. The results show that Miller converter can be used for the proposed SRM with slightly reduced efficiency at 80.4%.

Selecting Sanitation Solutions for Peri-urban Areas: A Case Study of Can Tho, Vietnam

2010 ◽  
Vol 5 (4) ◽  
Author(s):  
Naomi Carrard ◽  
Juliet Willetts ◽  
Cynthia Mitchell ◽  
Mick Paddon ◽  
Monique Retamal
Keyword(s):  
Urban Areas ◽  
Cost Effective ◽  
Asset Replacement ◽  
Fit For Purpose ◽  
Infrastructure Investments ◽  
Sanitation Systems ◽  
Can Tho City ◽  
Sustainable Futures ◽  
Sanitation Infrastructure ◽  
Selection Of

In peri-urban areas where infrastructure investments have not yet been made, there is a need to determine the most context-appropriate, fit for purpose and sustainable sanitation solutions. Decision makers must identify the optimal system scale (on the spectrum from centralized to community to cluster scale) and assess the long-term costs and socio-economic/environmental impacts associated with different options. Addressing both cost-effectiveness and sustainability are essential to ensure that institutions and communities are able to continue to bear the costs and management burden of infrastructure operation, maintenance and asset replacement. This paper describes an approach to sanitation planning currently being undertaken as a research study in Can Tho City in southern Vietnam, by the Institute for Sustainable Futures and Can Tho University in collaboration with Can Tho Water Supply and Sewerage Company. The aim of the study is to facilitate selection of the most context-appropriate, fit for purpose, cost effective and sustainable sanitation infrastructure solution. As such, the study compares a range of sanitation alternatives including centralized, decentralized (at household or cluster scale) and resource recovery options. This paper provides an overview of the study and considers aspects of the Can Tho and Vietnamese regulatory, development and institutional context that present drivers and challenges for comparison of options and selection of fit for purpose sanitation systems.

Quantitative Selection of Variation Reduction Plans

1998 ◽  
Author(s):  
Anna C. Thornton
Keyword(s):  
Risk Mitigation ◽  
Cost Effective ◽  
Variation Reduction ◽  
Multiple Quality Characteristics ◽  
Cost Effective Approach ◽  
Manufacturing Performance ◽  
The Impact ◽  
Manufacturing Variation ◽  
Selection Of

Abstract Quality has been a rallying call in the design and manufacturing world for the last two decades. One way to improve quality is to reduce the impact of manufacturing variation. Variation risk mitigation is challenging especially when a product has multiple quality characteristics and complex production and assembly. It is common wisdom that companies should identify and mitigate the risk associated with variation throughout the design process. As yield problems are identified, they should be mitigated using the most cost effective approach. One approach to variation risk mitigation is variation reduction (VR). VR targets reduction of variation introduced by existing manufacturing processes using tools such as Design of Experiments (DOE) and robust design. Many companies have specialized groups that specialize in these methods. VR teams have the role of improving manufacturing performance; however, these teams are limited in their resources. In addition, no tools exist to quantitatively determine where a VR team’s efforts are most effectively deployed. This paper provides a mathematical and optimization model to best allocate VR resources in a complex product.

A novel electrochemical comparative sensing interface of MgO nanoparticles synthesized by different methods

2017 ◽  
Vol 233 (3) ◽  
pp. 753-762 ◽  
Author(s):  
Utkarsh Jain ◽  
CS Pundir ◽  
Shaivya Gupta ◽  
Nidhi Chauhan
Keyword(s):  
Electrochemical Impedance ◽  
Chemical Reduction ◽  
Cost Effective ◽  
Green Technology ◽  
Mgo Nanoparticles ◽  
Transmission Electron ◽  
Impedance Spectroscopy Study ◽  
Vis Spectroscopy ◽  
Reduction Methods ◽  
Average Size

Recent advancements in nanotechnology, for the biosynthesis of metal nanoparticles through enormous techniques, showed multidimensional developments. One among many facets of nanotechnology is to procure and adopt new advancements for green technology over chemical reduction synthesis. This adaptation for acquiring green nanotechnology leads us to a new dimension of nanobiotechnology. In order to imply one such efforts, in this study the emphasis is being laid on the synthesis of MgO nanoparticles using green technology and eliminating chemical reduction methods. Different characterization techniques such as UV–Vis spectroscopy, transmission electron microscopy, and dynamic light scattering were used to carry out the experiments. The average size of MgO nanoparticles were obtained in the range of 85–95 nm, when synthesized by various sources. The extracts of plants were capable of producing MgO nanoparticles efficiently and exhibited good results during cyclic voltammetry and electrochemical impedance spectroscopy study. The electrode modified with MgO nanoparticles (plant extract) showed good stability (90 days) and high conductivity. This study reports cost-effective and environment-friendly method for synthesis of MgO nanoparticles using plant extracts. The process is rapid, simple, and convenient and can be used as an alternative to chemical method.

scholarly journals Improvement of the Impact Properties of Composite Laminates by Means of Nano-Modification of the Matrix—A Review

2018 ◽  
Vol 8 (12) ◽  
pp. 2406 ◽  
Author(s):  
Hamed Saghafi ◽  
Mohamad Fotouhi ◽  
Giangiacomo Minak
Keyword(s):  
Composite Laminates ◽  
Cost Effective ◽  
Careful Consideration ◽  
Impact Performance ◽  
Compression After Impact ◽  
The Matrix ◽  
The Right ◽  
2D And 3D ◽  
The Impact ◽  
Selection Of

This paper reviews recent works on the application of nanofibers and nanoparticle reinforcements to enhance the interlaminar fracture toughness, to reduce the impact induced damage and to improve the compression after impact performance of fiber reinforced composites with brittle thermosetting resins. The nanofibers have been mainly used as mats embedded between plies of laminated composites, whereas the nanoparticles have been used in 0D, 1D, 2D, and 3D dimensional patterns to reinforce the matrix and consequently the composite. The reinforcement mechanisms are presented, and a comparison is done between the different papers in the literature. This review shows that in order to have an efficient reinforcement effect, careful consideration is required in the manufacturing, materials selection and reinforcement content and percentage. The selection of the right parameters can provide a tough and impact resistant composite with cost effective reinforcements.

scholarly journals Development of KASP Markers for Germplasm Characterization and Fingerprinting Identification of Broccoli in China

2020 ◽  
Author(s):  
Yusen Shen ◽  
Jiansheng Wang ◽  
Huifang Yu ◽  
Xiaoguang Sheng ◽  
Zhenqing Zhao ◽  
...  
Keyword(s):  
Genetic Diversity ◽  
Marker Assisted Selection ◽  
Genetic Relationships ◽  
Cost Effective ◽  
Germplasm Characterization ◽  
2D Barcode ◽  
New Type ◽  
Generation Sequencing ◽  
Kasp Markers ◽  
Selection Of

Abstract Background: Broccoli (Brassica oleracea var. italica) is a vegetable widely cultivated in China. Many new-type broccoli cultivars were bred and developed by Chinese breeders during the recent three decades. However, the broccoli cultivar nomenclature and detailed information of genetic relationships among broccoli germplasms are unclear. Results: The present study identified millions of SNPs by next-generation sequencing of 23 representative broccoli lines. Through several steps of selection, 100 SNPs were successfully converted into KASP markers, and used to evaluate the genetic diversity, genetic relationship, and population structure of 392 broccoli accessions, which represent the mainly broccoli breeding materials in China. The initial, introduced and improved accessions were well clustered, though some accessions were overlapped between groups, probably reflecting the fact that breeding activities led to genetic similarities. To make the KASP genotyping more efficient and cost-effective, 25 of the 100 KASPs were selected for fingerprinting of all accessions, and the 2D barcode contained fingerprinting information were generated for elite varieties. Conclusion: The KASP markers developed in this study provided an efficient way for germplasm characterization, DNA fingerprinting, seed purity identification, and marker-assisted selection of broccoli in China.

Sign in / Sign up

Export Citation Format

Share Document