Energy-Based Assessment of Liquefaction Resistance of Rooted Soil

2022 ◽  
Vol 148 (1) ◽  
Author(s):  
Ali Akbar Karimzadeh ◽  
Anthony Kwan Leung ◽  
Pedram Fardad Amini
Keyword(s):  
Liquefaction Resistance

Application of Critical State Approach to Liquefaction Resistance of Sand–Silt Mixtures under Cyclic Simple Shear Loading

2021 ◽  
Vol 147 (3) ◽  
pp. 04020177
Author(s):  
Daniela Dominica Porcino ◽  
Theodoros Triantafyllidis ◽  
Torsten Wichtmann ◽  
Giuseppe Tomasello
Keyword(s):  
Simple Shear ◽  
Critical State ◽  
Shear Loading ◽  
Liquefaction Resistance

scholarly journals Calibration of Finn Model and UBCSAND Model for Simplified Liquefaction Analysis Procedures

2021 ◽  
Vol 11 (11) ◽  
pp. 5283
Author(s):  
Jui-Ching Chou ◽  
Hsueh-Tusng Yang ◽  
Der-Guey Lin
Keyword(s):  
Numerical Simulation ◽  
Constitutive Model ◽  
Structural Damage ◽  
Simulation Analysis ◽  
Constitutive Models ◽  
Soil Liquefaction ◽  
Analysis Procedure ◽  
Liquefaction Resistance ◽  
Simplified Procedure ◽  
Liquefaction Analysis

Soil-liquefaction-related hazards can damage structures or lead to an extensive loss of life and property. Therefore, the stability and safety of structures against soil liquefaction are essential for evaluation in earthquake design. In practice, the simplified liquefaction analysis procedure associated with numerical simulation analysis is the most used approach for evaluating the behavior of structures or the effectiveness of mitigation plans. First, the occurrence of soil liquefaction is evaluated using the simplified procedure. If soil liquefaction occurs, the resulting structural damage or the following mitigation plan is evaluated using the numerical simulation analysis. Rational and comparable evaluation results between the simplified liquefaction analysis procedure and the numerical simulation analysis are achieved by ensuring that the liquefaction constitutive model used in the numerical simulation has a consistent liquefaction resistance with the simplified liquefaction analysis procedure. In this study, two frequently used liquefaction constitutive models (Finn model and UBCSAND model) were calibrated by fitting the liquefaction triggering curves of most used simplified liquefaction analysis procedures (NCEER, HBF, JRA96, and T-Y procedures) in Taiwan via FLAC program. In addition, the responses of two calibrated models were compared and discussed to provide guidelines for selecting an appropriate liquefaction constitutive model in future projects.

CHARACTERIZATION OF LIQUEFACTION RESISTANCE OF SAND: EFFECT OF INITIAL FABRIC

2014 ◽  
Vol 08 (01) ◽  
pp. 1450001 ◽  
Author(s):  
BO LI ◽  
XIANGWU ZENG ◽  
HAO YU
Keyword(s):  
Depositional Environment ◽  
Design Method ◽  
Free Field ◽  
Recent Experience ◽  
Permeability Test ◽  
Fabric Anisotropy ◽  
Liquefaction Resistance ◽  
Liquefaction Potential ◽  
Centrifuge Tests

The micro-fabric of deposition reflects the imprints of its geologic and stress history, its depositional environment, and its weathering history. Recent experience shows that the fabric anisotropy does influence the static and dynamic behavior of granular materials. In this study, a series of centrifuge tests are conducted to investigate the effects of fabric anisotropy on the dynamic response in the free field. The results show the acceleration, pore pressure, and residual settlement is significantly affected by the fabric anisotropy of the ground, which shows the liquefaction resistance of the ground. Meanwhile, the response of acceleration is analyzed in frequency domain, which shows that the model prepared by 90° absorbs more energy than that of 0°. To verify the effects induced by the initial fabric, permeability test are conducted and related to the liquefaction potential. The results indicate the fabric anisotropy should be incorporated into the design method.

Cnoidal Wave-Induced Residual Liquefaction in Loosely Deposited Seabed under Coastal Shallow Water

2021 ◽  
Vol 11 (24) ◽  
pp. 11631
Author(s):  
Xiuwei Chai ◽  
Jingyuan Liu ◽  
Yu Zhou
Keyword(s):  
Shallow Water ◽  
Pore Pressure ◽  
Water Environment ◽  
Lateral Spreading ◽  
Stokes Wave ◽  
Cnoidal Wave ◽  
Liquefaction Resistance ◽  
Liquefaction Process ◽  
Wave Induced ◽  
Seabed Soil

This study is aimed at numerically investigating the cnoidal wave-induced dynamics characteristics and the liquefaction process in a loosely deposited seabed floor in a shallow water environment. To achieve this goal, the integrated model FSSI-CAS 2D is taken as the computational platform, and the advanced soil model Pastor–Zienkiewicz Mark III is utilized to describe the complicated mechanical behavior of loose seabed soil. The computational results show that a significant lateral spreading and vertical subsidence could be observed in the loosely deposited seabed floor due to the gradual loss of soil skeleton stiffness caused by the accumulation of pore pressure. The accumulation of pore pressure in the loose seabed is not infinite but limited by the liquefaction resistance line. The seabed soil at some locations could be reached to the full liquefaction state, becoming a type of heavy fluid with great viscosity. Residual liquefaction is a progressive process that is initiated at the upper part of the seabed floor and then enlarges downward. For waves with great height in shallow water, the depth of the liquefaction zone will be greatly overestimated if the Stokes wave theory is used. This study can enhance the understanding of the characteristics of the liquefaction process in a loosely deposited seabed under coastal shallow water and provide a reference for engineering activities.

Soil Liquefaction Evaluation of Offshore Site Based on In Situ Shear Wave Velocity Measurements

2013 ◽  
Vol 405-408 ◽  
pp. 470-473
Author(s):  
Sheng Jie Di ◽  
Ming Yuan Wang ◽  
Zhi Gang Shan ◽  
Hai Bo Jia
Keyword(s):  
Shear Wave ◽  
Wave Velocity ◽  
Shear Wave Velocity ◽  
Wind Farm ◽  
Soil Liquefaction ◽  
Offshore Wind ◽  
Velocity Measurements ◽  
Liquefaction Resistance ◽  
Liquefaction Potential

A procedure for evaluating liquefaction resistance of soils based on the shear wave velocity measurements is outlined in the paper. The procedure follows the general formal of the Seed-Idriss simplified procedure. In addition, it was developed following suggestions from industry, researchers, and practitioners. The procedure correctly predicts moderate to high liquefaction potential for over 95% of the liquefaction case histories. The case study for the site of offshore wind farm in Jiangsu province is provided to illustrate the application of the proposed procedure. The feature of the soils and the shear wave velocity in-situ tested in site are discussed and the liquefaction potential of the layer is evaluated. The application shows that the layers of the non-cohesive soils in the depths 3-11m may be liquefiable according to the procedure.

Sign in / Sign up

Export Citation Format

Share Document