Production of Environmentally Friendly Concrete Incorporating Bauxite Residue and Silica Fume

2022 ◽  
Vol 34 (2) ◽  
Author(s):  
Mansour Ghalehnovi ◽  
Naeim Roshan ◽  
Arash Taghizadeh ◽  
Elyas Asadi Shamsabadi ◽  
S. Ali Hadigheh ◽  
...  
Keyword(s):  
Silica Fume ◽  
Bauxite Residue ◽  
Environmentally Friendly

scholarly journals Geopolymer-Bonded Laminated Veneer Lumber as Environmentally Friendly and Formaldehyde-Free Product: Effect of Various Additives on Geopolymer Binder Features

2020 ◽  
Vol 10 (2) ◽  
pp. 593 ◽  
Author(s):  
Ali Shalbafan ◽  
Heiko Thoemen
Keyword(s):  
Mechanical Properties ◽  
Silica Fume ◽  
Positive Impact ◽  
Environmentally Friendly ◽  
Gel Time ◽  
Scanning Calorimetry ◽  
Bonding Quality ◽  
Laminated Veneer Lumber ◽  
Geopolymer Binder ◽  
Shear Bending

Environmentally friendly and formaldehyde-free laminated veneer lumber (LVL) was manufactured using geopolymer constituents as binder. The main aim of the study was to improve the bonding quality between the geopolymer binder and the wood constituents. To this end, the effect of various additives (phenol flakes, conventional silica fume, and grafted silica fume with 3-aminopropyltriethoxysilane (APTES)) in the geopolymer binder features were explored via gel time and viscosity measurements, differential scanning calorimetry (DSC), and Fourier transom infrared spectroscopy. The mechanical properties (shear, bending, and compression) of LVL panels were also determined. Results showed that adding both types of silica fume had a positive impact on the geopolymer binder features. The formation of an alkaline aluminosilicate network was proven by observing the characteristics peaks of geopolymer binder at about 683 and 970 cm−1. A peak temperature of about 98 °C was determined for the geopolymer binder curing via DSC analysis. The mechanical properties were the highest for LVL panels made of geopolymer binder with grafted silica fume. It is feasible that the APTES used as grafting agent created a better bonding mechanism with superficial wood cells. In summary, the produced LVL panel showed good properties, but it still needs to be further improved to reach the required levels for use in interior and humid application.

Are BMP Criteria Really Environmentally Friendly

WRPMD'99 ◽  
1999 ◽  
Author(s):  
Larry A. Roesner ◽  
Robert W. Brashear
Keyword(s):  
Environmentally Friendly

Environmentally Friendly Preparation of Magnetic Composites Featuring Proteolytic Properties

INEOS OPEN ◽  
2020 ◽  
Author(s):  
N. A. Samoilova ◽  
Keyword(s):  
Enzyme Immobilization ◽  
Maleic Acid ◽  
Environmentally Friendly ◽  
Synthetic Polymer ◽  
Magnetic Composites ◽  
Interpolyelectrolyte Complex ◽  
Hydrolysis Rates ◽  
Poly Ethylene ◽  
Noncovalent Binding

The enzyme-containing magnetic composites are presented. The magnetic matrix for enzyme immobilization is obtained by sequential application of an amine-containing polysaccharide—chitosan and a synthetic polymer—poly(ethylene-alt-maleic acid) to the magnetite microparticles to form the interpolyelectrolyte complex shell. Then, the enzyme (trypsin) is immobilized by covalent or noncovalent binding. Thus, the suggested composites can be readily obtained in the environmentally friendly manner. The enzyme capacity of the resulting composites reaches 28.0–32.6 mg/g. The maximum hydrolysis rates of the H-Val-Leu-Lys-pNA substrate provided by these composites range within 0.60·10–7–0.77·10–7 M/min.

Method of high frequency therapy at cows' mastitis during machine milking

2020 ◽  
pp. 9-12
Author(s):  
Viktor E. Lyubimov ◽  
Keyword(s):  
Dairy Cows ◽  
Electromagnetic Fields ◽  
High Frequency ◽  
High Efficiency ◽  
Environmentally Friendly ◽  
Ultrahigh Frequency ◽  
Machine Milking ◽  
High Frequency Electromagnetic Field ◽  
Milking Machine ◽  
Methods Of Treatment

Health of dairy cows ensures human health, so it is important that dairy products do not contain antibiotics that are used to treat any inflammation, including mastitis. In Russia at present, the problem of mastitis in cows exists with both attached and loose housing of cows. Mastitis of dairy cows are the great problem in milking husbandry. Losses from mastitis in milk yield can reach 15-20%. The main reasons for the occurrence of nonspecific mastitis of cows are the shortcomings of the working components of the milking machine: the degree of deterioration of the nipple rubber and the violation of machine milking technology (the reduction in pre-milking time and vacuum fluctuations account for 70% of all causes). Treatment of mastitis with antibiotics is effective, but not environmentally friendly and unacceptable. For the treatment of inflammation of the udder, it is necessary to use more environmentally friendly methods of treatment, one of which is the exposure to ultra-high frequency electromagnetic field tested by medicine. Use of three types of medical-mobile milking machines with the same method of exposure to ultrahigh-frequency electromagnetic fields on cow's nipples through electrodes in milking cups: LPDA-1-UHF, LPDA-2-UHF and LPDA-UHF-30 M, is described in the article. Author proved that cows with subclinical forms of mastitis recovered faster during milking with exposure to the ultrahigh frequency than when treated by antibiotics, and milking with the ultrahigh frequency device helps to recover 82% of the affected quarters with clinical forms and 100% of cows with subclinical forms of mastitis or with udder irritation. The high efficiency of the method of exposure to electromagnetic fields of the ultrahigh frequency during machine milking by means of medical-mobile milking machines LPDA-UHF for the prevention and treatment of mastitis of cows was shown.

Sign in / Sign up

Export Citation Format

Share Document