Effect of temperature gradient on thick film selective emitter emittance

1997 ◽  
Author(s):  
Donald L. Chubb ◽  
Brian S. Good ◽  
Eric B. Clark ◽  
Zheng Chen
Keyword(s):  
Temperature Gradient ◽  
Thick Film ◽  
Effect Of Temperature ◽  
Selective Emitter

scholarly journals The Effect of Cooling Agent on Stress and Deformation of Charge-loaded Cast Pallets

2017 ◽  
Vol 17 (4) ◽  
pp. 13-18
Author(s):  
A. Bajwoluk ◽  
P. Gutowski
Keyword(s):  
Heat Transfer ◽  
Heat Treatment ◽  
Temperature Gradient ◽  
Effect Of Temperature ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Cooling Conditions ◽  
Cooling Agent ◽  
Stress And Deformation ◽  
A Charge

Abstract The results of research on the effect of the type of cooling agent used during heat treatment and thermal-chemical treatment on the formation of temperature gradient and stress-deformation distribution in cast pallets, which are part of furnace accessories used in this treatment, are disclosed. During operation, pallets are exposed to the effect of the same conditions as the charge they are carrying. Cyclic thermal loads are the main cause of excessive deformations or cracks, which after some time of the cast pallet operation result in its withdrawal due to damage. One of the major causes of this damage are stresses formed under the effect of temperature gradient in the unevenly cooled pallet construction. Studies focused on the analysis of heat flow in a charge-loaded pallet, cooled by various cooling agents characterized by different heat transfer coefficients and temperature. Based on the obtained temperature distribution, the stress distribution and the resulting deformation were examined. The results enabled drawing relevant conclusions about the effect of cooling conditions on stresses formed in the direction of the largest temperature gradient.

scholarly journals Effect of temperature gradient on heavy quark anti-quark potential using gravity dual model

2020 ◽  
Author(s):  
S Ganesh ◽  
M Mishra
Keyword(s):  
Temperature Gradient ◽  
Gluon Plasma ◽  
Effect Of Temperature ◽  
Dual Model ◽  
Thermal Gradients ◽  
Imaginary Time ◽  
Thermal Systems ◽  
Naturally Occurring ◽  
Quark Potential ◽  
Stationary Approximation

Abstract Thermal systems have traditionally been modeled via Euclideanized space by analytical continuation of time to an imaginary time. We extend the concept to static thermal gradients by recasting the temperature variation as a variation in the Euclidean metric. We apply this prescription to determine the Quark anti-Quark potential in a system with thermal gradient. A naturally occurring QCD medium with thermal gradients is a Quark Gluon Plasma (QGP). However, the QGP evolves in time. Hence, we use a quasi-stationary approximation, which is applicable only if the rate of time evolution is slow. Hence the application of our proposal to a Quark anti-Quark potential in QGP can be seen as a step towards a more exact theory which would incorporate time varying thermal gradients. The effect of a static temperature gradient on the Quark anti-Quark potential is analyzed using a gravity dual model. A non-uniform black string metric is developed, by perturbing the Schwarzchild metric, which allows to incorporate the temperature gradient in the dual AdS space. Finally, an expression for the Quark anti-Quark potential, in the presence of a static temperature gradient, is derived.

Effect of Temperature Gradient on the Mechanical Buckling Resistance of FGM Shallow Arches

2014 ◽  
Author(s):  
M. Bateni ◽  
M. R. Eslami
Keyword(s):  
Temperature Gradient ◽  
Thermal Environment ◽  
Mechanical Load ◽  
Functionally Graded ◽  
Effect Of Temperature ◽  
Power Law Distribution ◽  
Concentrated Load ◽  
Shallow Arches ◽  
Buckling Resistance ◽  
Graded Material

This work presents a closed form investigation on the effect of temperature gradient on the buckling resistance of functionally graded material (FGM) shallow arches. The constituents are assumed to vary smoothly through the thickness of the arch according to the power law distribution and they are assumed to be temperature dependent. The arches subjected to the both uniform distributed radial load and central concentrated load and both boundary supports are supposed to be pinned. The temperature field is approximated by one-dimensional linear gradient through the thickness of the arch and the displacement field approximated by classical arches model. Also, Donnell type kinematics is utilized to extract the suitable strain-displacement relations for shallow arches. Adjacent equilibrium criterion is used to buckling analysis, and, critical bifurcation load is obtain in the complete presence of pre-buckling deformations. Results discloses the usefulness of using the FGM shallow arches in thermal environment because the temperature gradient enhances the buckling resistance of these structures when they are subjected to a lateral mechanical load.

Effect of temperature gradient on chemical element partitioning in corium pool during in-vessel retention

2018 ◽  
Vol 327 ◽  
pp. 82-91 ◽  
Author(s):  
V.B. Khabensky ◽  
V.S. Granovsky ◽  
V.I. Almjashev ◽  
S.A. Vitol ◽  
E.V. Krushinov ◽  
...  
Keyword(s):  
Temperature Gradient ◽  
Chemical Element ◽  
Effect Of Temperature ◽  
Element Partitioning

Phase Field Modeling of Solidification in Single Component Systems

2017 ◽  
Author(s):  
Sepideh Kavousi ◽  
Dorel Moldovan
Keyword(s):  
Heat Flux ◽  
Temperature Gradient ◽  
Power Law ◽  
Phase Field ◽  
Thermal Gradient ◽  
Solidification Rate ◽  
Single Component ◽  
Effect Of Temperature ◽  
Phase Field Modeling ◽  
Field Modeling

Using phase field modeling simulation approach we investigate the effect of various parameters on the primary and secondary dendrite arm spacing during directional solidification in a single component system. In previous studies the effect of temperature gradient was assumed to be negligible in the transversal directions with a temperature rate equal to the product of thermal gradient and solidification rate. In our study the temperature field is obtained from energy conservation equation by considering the balance of latent heat released in the regions where solidification occurs and energy dissipation due to directional temperature gradient as boundary condition. In our simulations, we implemented a numerical method that enables the investigation of solidification in larger domains. Specifically, the temperature and the order parameter equations are solved only in the domains close to the solidification front; approach that reduces the computational costs significantly. We investigate the interplay and the effect of thermal gradient, solidification rate, undercooling temperature, and the cooling heat flux on arm spacing. By using a well-established power law relation the primary and secondary arm spacing are calculated for various solidification parameters. We also show that, for large heat fluxes, the secondary arm spacing is almost constant for different undercooling temperatures; behavior that demonstrates the need for correction of the power law relation by including the effect of heat flux.

Sign in / Sign up

Export Citation Format

Share Document