Data analysis procedures for time-resolved x-ray photoelectron spectroscopy at a SASE free-electron-laser

2021 ◽  
Author(s):  
Dennis Mayer ◽  
Fabiano Lever ◽  
Markus Gühr
Keyword(s):  
Data Analysis ◽  
Photon Energy ◽  
Photoelectron Spectroscopy ◽  
Free Electron ◽  
Spectral Characteristics ◽  
Photoelectron Spectra ◽  
Difference Spectra ◽  
Time Resolved ◽  
X Ray ◽  
Photoelectron Line

Abstract The random nature of self-amplified spontaneous emission (SASE) is a well-known challenge for x-ray core level spectroscopy at SASE free-electron lasers (FELs). Especially in time-resolved experiments that require a combination of good temporal and spectral resolution the jitter and drifts in the spectral characteristics, relative arrival time as well as power fluctuations can smear out spectral-temporal features. We present a combination of methods for the analysis of time-resolved photoelectron spectra based on power and time corrections as well as self-referencing of a strong photoelectron line. Based on sulfur 2p photoelectron spectra of 2-thiouracil taken at the SASE FEL FLASH2, we show that it is possible to correct for some of the photon energy drift and jitter even when reliable shot-to-shot photon energy data is not available. The quality of pump-probe difference spectra improves as random jumps in energy between delay points reduce significantly. The data analysis allows to identify coherent oscillations of 1 eV shift on the mean photoelectron line of 4 eV width with an error of less than 0.1 eV.

scholarly journals Dyson Orbitals within the fc-CVS-EOM-CCSD Framework: Theory and Application to X-ray Photoelectron Spectroscopy of Ground and Excited States

2019 ◽  
Author(s):  
Marta L. Vidal ◽  
Anna Krylov ◽  
Sonia Coriani
Keyword(s):  
Excited States ◽  
Ground State ◽  
Photoelectron Spectroscopy ◽  
Equation Of Motion ◽  
Photoelectron Spectra ◽  
Coupled Cluster ◽  
Time Resolved ◽  
X Ray ◽  
Target States

We report on the implementation of Dyson orbitals within the recently introduced frozen-core (fc) core-valence separated (CVS) equation-of-motion (EOM) coupled-cluster singles and doubles (CCSD) method, which enables efficient and reliable characterization of core-level states. The ionization potential (IP) variant of fc-CVS-EOM-CCSD, in which the EOM target states have one electron less than the reference, gives access to core-ionized states thus enabling modeling of<br><div>X-ray photoelectron spectra (XPS) and its time-resolved variant (TR-XPS). Dyson orbitals are reduced quantities that can be interpreted as correlated states of the ejected/attached electron; they enter the expressions of various experimentally relevant quantities. In the context of photoelectron spectroscopy, Dyson orbitals can be used to estimate the strengths of photoionization transitions. We illustrate the utility of Dyson orbitals and fc-CVS-EOM-IP-CCSD by calculating XPS of the ground state of adenine and TR-XPS of the excited states of uracil.</div>

scholarly journals Dyson Orbitals within the fc-CVS-EOM-CCSD Framework: Theory and Application to X-ray Photoelectron Spectroscopy of Ground and Excited States

2019 ◽  
Author(s):  
Marta L. Vidal ◽  
Anna Krylov ◽  
Sonia Coriani
Keyword(s):  
Excited States ◽  
Ground State ◽  
Photoelectron Spectroscopy ◽  
Equation Of Motion ◽  
Photoelectron Spectra ◽  
Coupled Cluster ◽  
Time Resolved ◽  
X Ray ◽  
Target States

We report on the implementation of Dyson orbitals within the recently introduced frozen-core (fc) core-valence separated (CVS) equation-of-motion (EOM) coupled-cluster singles and doubles (CCSD) method, which enables efficient and reliable characterization of core-level states. The ionization potential (IP) variant of fc-CVS-EOM-CCSD, in which the EOM target states have one electron less than the reference, gives access to core-ionized states thus enabling modeling of<br><div>X-ray photoelectron spectra (XPS) and its time-resolved variant (TR-XPS). Dyson orbitals are reduced quantities that can be interpreted as correlated states of the ejected/attached electron; they enter the expressions of various experimentally relevant quantities. In the context of photoelectron spectroscopy, Dyson orbitals can be used to estimate the strengths of photoionization transitions. We illustrate the utility of Dyson orbitals and fc-CVS-EOM-IP-CCSD by calculating XPS of the ground state of adenine and TR-XPS of the excited states of uracil.</div>

scholarly journals Towards time resolved core level photoelectron spectroscopy with femtosecond x-ray free-electron lasers

2008 ◽  
Vol 10 (3) ◽  
pp. 033004 ◽  
Author(s):  
A Pietzsch ◽  
A Föhlisch ◽  
M Beye ◽  
M Deppe ◽  
F Hennies ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free Electron ◽  
Core Level ◽  
Free Electron Lasers ◽  
Time Resolved ◽  
X Ray

scholarly journals Modification of Wood with Monoethanolamino-borate by The Data of X-Ray Photoelectron Spectroscopy

2018 ◽  
Vol 196 ◽  
pp. 04005
Author(s):  
Irina Stepina ◽  
Irina Kotlyarova
Keyword(s):  
Particle Size ◽  
Photoelectron Spectroscopy ◽  
Model Compound ◽  
Hydrolytic Stability ◽  
Photoelectron Spectra ◽  
Wood Cellulose ◽  
Rapid Loss ◽  
X Ray ◽  
Wood Protection ◽  
Cellulose Materials

The difficulty of wood protection from biocorrosion and fire is due to the fact that modifiers in use are washed out from the surface of the substrate under the influence of environmental factors. This results in a rapid loss of the protective effect and other practically important wood characteristics caused by the modification. To solve this problem is the aim of our work. Here, monoethanolaminoborate is used as a modifier, where electron-donating nitrogen atom provides a coordination number equal to four to a boron atom, which determines the hydrolytic stability of the compounds formed. Alpha-cellulose ground mechanically to a particle size of 1 mm at most was used as a model compound for the modification. X-ray photoelectron spectra were recorded on the XSAM-800 spectrometer (Kratos, UK). Prolonged extraction of the modified samples preceded the registration of the photoelectron spectra to exclude the fixation of the modifier molecules unreacted with cellulose. As a result of the experiment, boron and nitrogen atoms were found in the modified substrate, which indicated the hydrolytic stability of the bonds formed between the modifier molecules and the substrate. Therefore monoethanolaminoborate can be considered as a non-extractable modifier for wood-cellulose materials.

scholarly journals Impact of high temperatures on aluminoceladonite studied by Mössbauer, Raman, X-ray diffraction and X-ray photoelectron spectroscopy

2021 ◽  
Author(s):  
Mariola Kądziołka-Gaweł ◽  
Maria Czaja ◽  
Mateusz Dulski ◽  
Tomasz Krzykawski ◽  
Magdalena Szubka
Keyword(s):  
Photoelectron Spectroscopy ◽  
Integral Intensity ◽  
Photoelectron Spectra ◽  
X Ray Diffraction ◽  
Structural Reorganization ◽  
Oh Groups ◽  
X Ray ◽  
Al Content ◽  
Integral Intensity Ratio ◽  
Higher Temperature

AbstractMössbauer, Raman, X-ray diffraction and X-ray photoelectron spectroscopies were used to examine the effects of temperature on the structure of two aluminoceladonite samples. The process of oxidation of Fe2+ to Fe3+ ions started at about 350 °C for the sample richer in Al and at 300 °C for the sample somewhat lower Al-content. Mössbauer results show that this process may be associated with dehydroxylation or even initiate it. The first stage of dehydroxylation takes place at a temperature > 350 °C when the adjacent OH groups are replaced with a single residual oxygen atom. Up to ~500 °C, Fe ions do not migrate from cis-octahedra to trans-octahedra sites, but the coordination number of polyhedra changes from six to five. This temperature can be treated as the second stage of dehydroxylation. The temperature dependence on the integral intensity ratio between bands centered at ~590 and 705 cm−1 (I590/I705) clearly reflects the temperature at which six-coordinated polyhedra are transformed into five-coordinated polyhedra. X-ray photoelectron spectra obtained in the region of the Si2p, Al2p, Fe2p, K2p and O1s core levels, highlighted a route to identify the position of Si, Al, K and Fe cations in a structure of layered silicates with temperature. All the measurements show that the sample with a higher aluminum content and a lower iron content in octahedral sites starts to undergo a structural reorganization at a relatively higher temperature than the less aluminum-rich sample does. This suggests that iron may perform an important role in the initiation of the dehydroxylation of aluminoceladonites.

scholarly journals Characterization of Ti/SnO2 Interface by X-ray Photoelectron Spectroscopy

Nanomaterials ◽  
2022 ◽  
Vol 12 (2) ◽  
pp. 202
Author(s):  
Miranda Martinez ◽  
Anil R. Chourasia
Keyword(s):  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Chemical Interaction ◽  
Photoelectron Spectra ◽  
X Ray ◽  
Increasing Trend ◽  
Substrate Temperatures ◽  
Beam Technique

The Ti/SnO2 interface has been investigated in situ via the technique of x-ray photoelectron spectroscopy. Thin films (in the range from 0.3 to 1.1 nm) of titanium were deposited on SnO2 substrates via the e-beam technique. The deposition was carried out at two different substrate temperatures, namely room temperature and 200 °C. The photoelectron spectra of tin and titanium in the samples were found to exhibit significant differences upon comparison with the corresponding elemental and the oxide spectra. These changes result from chemical interaction between SnO2 and the titanium overlayer at the interface. The SnO2 was observed to be reduced to elemental tin while the titanium overlayer was observed to become oxidized. Complete reduction of SnO2 to elemental tin did not occur even for the lowest thickness of the titanium overlayer. The interfaces in both the types of the samples were observed to consist of elemental Sn, SnO2, elemental titanium, TiO2, and Ti-suboxide. The relative percentages of the constituents at the interface have been estimated by curve fitting the spectral data with the corresponding elemental and the oxide spectra. In the 200 °C samples, thermal diffusion of the titanium overlayer was observed. This resulted in the complete oxidation of the titanium overlayer to TiO2 upto a thickness of 0.9 nm of the overlayer. Elemental titanium resulting from the unreacted overlayer was observed to be more in the room temperature samples. The room temperature samples showed variation around 20% for the Ti-suboxide while an increasing trend was observed in the 200 °C samples.

scholarly journals Towards chemically neutral carbon cleaning processes: plasma cleaning of Ni, Rh and Al reflective optical coatings and thin Al filters for free-electron lasers and synchrotron beamline applications

2018 ◽  
Vol 25 (6) ◽  
pp. 1642-1649 ◽  
Author(s):  
Harol Moreno Fernández ◽  
Marco Zangrando ◽  
Guillaume Sauthier ◽  
Alejandro R. Goñi ◽  
Vincent Carlino ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Free Electron ◽  
Inductively Coupled Plasma ◽  
High Performance ◽  
Extreme Ultraviolet ◽  
Filter Material ◽  
Gas Mixture ◽  
Carbon Contamination ◽  
X Ray ◽  
Chemical Surface

The choice of a reflective optical coating or filter material has to be adapted to the intended field of application. This is mainly determined by the required photon energy range or by the required reflection angle. Among various materials, nickel and rhodium are common materials used as reflective coatings for (soft) X-ray mirrors. Similarly, aluminium is one of the most commonly used materials for extreme ultraviolet and soft X-ray transmission filters. However, both of these types of optics are subject to carbon contamination, which can be increasingly problematic for the operation of the high-performance free-electron laser and synchrotron beamlines. As an attempt to remove this type of contamination, an inductively coupled plasma source has been used in conjunction with N2/O2/H2 and N2/H2 feedstock gas plasmas. Results from the chemical surface analysis of the above materials before and after plasma treatment using X-ray photoelectron spectroscopy are reported. It is concluded that a favorable combination of an N2/H2 plasma feedstock gas mixture leads to the best chemical surface preservation of Ni, Rh and Al while removing the carbon contamination. However, this feedstock gas mixture does not remove C contamination as rapidly as, for example, an N2/O2/H2 plasma which induces the surface formation of NiO and NiOOH in Ni and RhOOH in Rh foils. As an applied case, the successful carbon removal from ultrathin Al filters previously used at the FERMI FEL1 using an N2/H2 plasma is demonstrated.

Sign in / Sign up

Export Citation Format

Share Document