scholarly journals Performance analysis of a novel integrated photovoltaic–thermal system by top-surface forced circulation of water

Clean Energy ◽  
2020 ◽  
Author(s):  
Md Arman Arefin ◽  
Mohammad Towhidul Islam ◽  
Mohammad Zunaed ◽  
Khodadad Mostakim
Keyword(s):  
No Value ◽  
Forced Circulation ◽  
Pv Panel ◽  
Photovoltaic Thermal System ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis ◽  
Mass Flow Rates ◽  
Overall Efficiency ◽  
The Individual ◽  
Over The Top

Abstract Almost 80–90% of energy is wasted as heat (provides no value) in a photovoltaic (PV) panel. An integrated photovoltaic–thermal (PVT) system can utilize this energy and produce electricity simultaneously. In this research, through energy and exergy analysis, a novel design and methodology of a PVT system are studied and validated. Unlike the common methods, here the collector is located outside the PV panel and connected with pipes. Water passes over the top of the panel and then is forced to the collector by a pump. The effects of different water-mass flow rates on the PV panel and collector, individual and overall efficiency, mass loss, exergetic efficiency are examined experimentally. Results show that the overall efficiency of the system is around five times higher than the individual PV-panel efficiency. The forced circulation of water dropped the panel temperature and increased the panel efficiency by 0.8–1% and exergy by 0.6–1%, where the overall energy efficiency was ~81%.

scholarly journals Performance Evaluation of Photovoltaic/Thermal (PV/T) System Using Different Design Configurations

2020 ◽  
Vol 12 (22) ◽  
pp. 9520
Author(s):  
M. Imtiaz Hussain ◽  
Jun-Tae Kim
Keyword(s):  
Heat Exchanger ◽  
Numerical Study ◽  
Balance Equations ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Pv Panel ◽  
Exchange Area ◽  
Energy And Exergy ◽  
Overall Efficiency ◽  
T System

This study summarizes the performance of a photovoltaic/thermal (PV/T) system integrated with a glass-to-PV backsheet (PVF film-based backsheet) and glass-to-glass photovoltaic (PV) cells protections. A dual-fluid heat exchanger is used to cool the PV cells in which water and air are operated simultaneously. The proposed PV/T design brings about a higher electric output while producing sufficient thermal energy. A detailed numerical study was performed by calculating real-time heat transfer coefficients. Energy balance equations across the dual-fluid PV/T system were solved using an ordinary differential equation (ODE) solver in MATLAB software. The hourly and annual energy and exergy variations for both configurations were evaluated for Cheonan City, Korea. In the case of a PV/T system with a glass-to-glass configuration, a larger heat exchange area causes the extraction of extra solar heat from the PV cells and thus improving the overall efficiency of the energy transfer. Results depict that the annual electrical and total thermal efficiencies with a glass-to-glass configuration were found to be 14.31% and 52.22%, respectively, and with a glass-to-PV backsheet configuration, the aforementioned values reduced to 13.92% and 48.25%, respectively. It is also observed that, with the application of a dual-fluid heat exchanger, the temperature gradient across the PV panel is surprisingly reduced.

scholarly journals Energy and exergy analysis of air based photovoltaic thermal (PVT) collector: a review

2019 ◽  
Vol 9 (1) ◽  
pp. 109 ◽  
Author(s):  
Ahmad Fudholi ◽  
Mariyam Fazleena Musthafa ◽  
Abrar Ridwan ◽  
Rado Yendra ◽  
Ari Pani Desvina ◽  
...  
Keyword(s):  
Solar Radiation ◽  
Flat Plate ◽  
Solar Collector ◽  
Exergy Analysis ◽  
Exergy Efficiency ◽  
Pv Panel ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis ◽  
Flat Plate Solar Collector

<span lang="EN-US">Photovoltaic thermal (PVT) collectors convert solar radiation directly to both electrical and thermal energies. A PVT collector basiccaly combines the functions of a flat plate solar collector and those of a PV panel. This review presents thermodinamics fundamentals, descriptions, and previous works conducted on energy and exergy analysis of air based PVT collector. Studies in 2010 to 2018 of the energy and exergy analysis of air based PVT collectors are summarized. The energy and exergy efficiency of air based PVT collector ranges from 31% to 94% and 8.7% to 18%, respectively. In addition, flat plate solar collector is presented. Studies conducted on air based PVT collectors are reviewed.</span>

Experimental investigation of an active inclined solar panel absorber solar still - Energy and Exergy analysis

2021 ◽  
Author(s):  
Mohamed Thalib Mohamed Rafeek ◽  
Vimala Muthu ◽  
Muthu Manokar Athikesavan ◽  
Ravishankar Sathyamurthy ◽  
Abd Elnaby Kabeel
Keyword(s):  
Mass Flow ◽  
Average Energy ◽  
Electrical Energy ◽  
Exergy Efficiency ◽  
Solar Panel ◽  
Water Yield ◽  
Flow Rates ◽  
Pv Panel ◽  
Energy And Exergy ◽  
Mass Flow Rates

Abstract The objective of the current study is to investigate the performance of the Inclined Solar Panel Basin Still (ISPBS) incorporated with a Spiral Tube Collector (STC) for various mass flow rates of water (mf). The maximum potable water yield of 8.1, 6.9 and 6.1 kg is obtained for different mass flow rates of 1.8, 3.2 and 4.7 kg/hr in each instance. Also, for mf values of 1.8, 3.2 and 4.7 kg per hour, the daily average energy and exergy efficiency of the ISPBS is recorded to be 47.9, 39.3 and 31.02 % and 9.8, 7.9 and 5.6 % in each instance. The average electrical, energy and exergy efficiency of the PV panel is noted to be 6.5, 7.1 and 7.5 %, 15.67, 17.1 and 18.04 % and 20.03, 22.21 and 23.36 % for mf values of 1.8, 3.2 and 4.7 kg/hr in each instance. The rise in mf causes a drop in the fresh water production yield, thermal, exergy and overall thermal effectiveness and an enhancement in the power production of the panel, electrical, thermal, exergy and overall exergy efficiency of the system.

Performance assessment of novel photovoltaic thermal system using nanoparticle in phase change material

2019 ◽  
Vol 29 (4) ◽  
pp. 1490-1505 ◽  
Author(s):  
Alper Ergün ◽  
Hilal Eyinç
Keyword(s):  
Phase Change ◽  
Phase Change Material ◽  
Paraffin Wax ◽  
Thermal System ◽  
Thermal Systems ◽  
Content Type ◽  
Pv Panel ◽  
Photovoltaic Thermal System ◽  
Energy And Exergy Analysis ◽  
Change Material

Purpose Nanotechnology has developed gradually in recent years and it is encountered in various applications. It has many usage area especially in energy systems. The purpose of this study, in a photovoltaic thermal system, thermal behaviours of a PV panel has been investigated by energy and exergy analysis method using a phase change material inserted 5 per cent weighted Al2O3 nanoparticle. Design/methodology/approach In this study, one of the three different PV panels was kept normally, the other one was filled with a phase changing material (paraffin-wax) and the last panel was filled with the mixture of a nanoparticle and paraffin-wax. Findings After the analyses, especially during the time intervals when the radiation is high, it is found that the panel with Np-paraffin mixture has a high electrical and thermal efficiency. In addition, as a result of the exergy analyses, average exergy efficiency of the panel with Np-paraffin mixture has been determined as 10 per cent, whereas that of the panel with paraffin as 9.2 per cent. Originality/value Nanoparticles had not been used with PCMs in photovoltaic–thermal systems in the studies made before.

scholarly journals Heat transfer and efficiency of dual channel PVT air collector: a review

2019 ◽  
Vol 10 (4) ◽  
pp. 2037
Author(s):  
Ahmad Fudholi ◽  
Muhammad Zohri ◽  
Ivan Taslim ◽  
Fitrotun Aliyah ◽  
Arthur Gani Koto
Keyword(s):  
Heat Transfer ◽  
Mathematical Models ◽  
Thermal Energy ◽  
Environment Friendly ◽  
One Dimensional ◽  
Dual Channel ◽  
Pv Panel ◽  
System A ◽  
Energy And Exergy ◽  
Energy And Exergy Analysis

Solar energy is free, renewable and environment friendly and has been widely used in electricity generation and thermal energy through photovoltaic thermal (PVT) system. A PVT collector is a combination of a PV panel and a thermal collector in a single unit to simultaneously generate electricity and thermal energy. In this review, mathematical models for dual channel PVT air collectors is presented. This review presents various research and development, as well as heat transfer and thermal modelling of dual channel PVT air collectors. Moreover, various mathematical models that evaluate the performances base on energy and exergy analysis of dual channel PVT air collectors are presented. Energy balance is the basic concept in developing the mathematical models. Generally, steady-state one-dimensional linear first-order differential equations were reported for solution of mathematical model. Energy and exergy efficiencies of dual channel PVT air collectors were 22.5%–67% and 3.9%-58%, respectively.

scholarly journals Energy and Exergy Analysis of LiBr-aq and LiCl-aq Liquid Desiccant Dehumidification System

2020 ◽  
Vol 14 (1) ◽  
pp. 36-40
Author(s):  
Barış KavasoğullarI ◽  
Ertuğrul Cihan ◽  
Hasan Demir
Keyword(s):  
Exergy Analysis ◽  
Lithium Bromide ◽  
Exergy Efficiency ◽  
Coefficient Of Performance ◽  
Airflow Rate ◽  
Liquid Desiccant ◽  
Energy And Exergy ◽  
Liquid Desiccant Dehumidification ◽  
Energy And Exergy Analysis ◽  
Mass Flow Rates

In this study, energy and exergy analysis of experimental results obtained from a dehumidification system using LiBr-aq (lithium bromide-water) and LiCl-aq (lithium chloridewater) as desiccant was made. In dehumidifier and regenerator columns polycarbonate sheets, which have not been used before, were used as packing material to increase contact area in purposed liquid desiccant dehumidification system. In the analysis, variation of electrical coefficient of performance and exergy efficiency with airflow rate for different solution mass flow rates were investigated. Because of investigation, maximum values of electrical coefficient of performance and exergy efficiency were calculated approximately as 2.8 and 18%, respectively.

Sign in / Sign up

Export Citation Format

Share Document