Surgical Anatomic Evaluation of the Cervical Pedicle and Adjacent Neural Structures

Neurosurgery ◽  
2000 ◽  
Vol 47 (5) ◽  
pp. 1162-1169 ◽  
Author(s):  
Hasan Çağlar Uğur ◽  
Ayhan Attar ◽  
Aysun Uz ◽  
İbrahim Tekdemir ◽  
Nihat Egemen ◽  
...  

Abstract OBJECTIVE Although several clinical applications of transpedicular screw fixation in the cervical spine have been documented recently, few anatomic studies concerning the cervical pedicle are available. This study was designed to evaluate the anatomy and adjacent neural relationships of the middle and lower cervical pedicle (C3–C7). The main objective is to provide accurate information for transpedicular screw fixation in the cervical region and to minimize complications by providing a three-dimensional orientation. METHODS Twenty cadavers were used to observe the cervical pedicle and its relationships. After removal of the posterior bony elements, including spinous processes, laminae, lateral masses, and inferior and superior facets, the isthmus of the pedicle was exposed. Pedicle width, pedicle height, interpedicular distance, pedicle-inferior nerve root distance, pedicle-superior nerve root distance, pedicle-dural sac distance, medial pedicle-dural sac distance, mean angle of the pedicle, root exit angle, and nerve root diameter were measured. RESULTS The results indicate that there was no distance between the pedicle and the superior nerve root and between the pedicle and the dural sac in 16 specimens, whereas there was a slight distance in the lower cervical region in the 4 other specimens. The mean distance between the pedicle and the inferior nerve root for all specimens ranged from 1.0 to 2.5 mm. The mean distance between the medial pedicle and the dural sac increased consistently from 2.4 to 3.1 mm. At C3–C7, the mean pedicle height ranged from 5.2 to 8.5 mm, and the mean pedicle width ranged from 3.7 to 6.5 mm. Interpedicular distance ranged from 21.2 to 23.2 mm. The mean root exit angle ranged from 69 to 104 degrees, with the largest angle at C3 and the smallest at C6. The mean angle of the pedicle ranged from 38 to 48 degrees. The nerve root diameter increased consistently from 2.7 mm at C3 to 3.8 mm at C6 and then decreased to 3.7 mm at the C7 level. Differences in measurements were considered statistically significant at levels ranging from P < 0.05 to P < 0.01. CONCLUSION This study indicates that improper placement of the pedicle screw medially and superiorly in the middle and lower cervical spine should be avoided and that the anatomic variations between individuals should be established by measurement.

2016 ◽  
Vol 6 (3) ◽  
pp. 156-161
Author(s):  
Mangala M Pai ◽  
Bukkambudhi V Murlimanju ◽  
Latha V Prabhu ◽  
Rajanigandha Vadgaonkar ◽  
P P. Jagadish Rao ◽  
...  

Los objetivos del presente estudio fueron determinar los parámetros anatómicos del pedículo S1 en la población India del sur para comparar los datos con respecto a los géneros masculinos y femeninos. El estudio incluyó 50 sacros secos (25 hombres y 25 mujeres) que se obtuvieron en el laboratorio de anatomía de nuestra institución. En el presente estudio se observa que la longitud media del pedículo S1 fue 49.9± 3,6 mm para los hombres y 46.3± 4,8 mm para las mujeres. La altura céfalo-caudal del pedículo S1 fue 27.2±4.0 mm y 23.9±3.7 mm para el varón y la hembra respectivamente. La anchura antero-posterior del pedículo S1 fue 7.5± 1,3 mm, 7.5± 1.7 mm en varones y mujeres, respectivamente. La distancia antero-posterior de S1, desde el promontorio sacro a la apófisis espinosa de S1 fue 52.9± 5.2 mm y 50.4± 6.8 mm en los géneros masculino y femenino respectivamente. El presente estudio demostró que la longitud y la altura de céfalo-caudal eran más altos (p0.05) en varones que en mujeres. Los datos de mujeres y varones con respecto a la anchura antero-posterior y la distancia antero-posterior de S1 no eran estadísticamente diferentes. El presente estudio ha proporcionado datos morfométricos importantes del pedículo de la primera vértebra sacra de la muestra anatómica de la población India del sur. El conocimiento de los diámetros del pedículo de S1 es crucial para la colocación segura de tornillos para la fijación transpedicular posterior. Objectives of the present study were to determine the anatomical parameters of the S1 pedicle in South Indian population and to compare the data, with respect to male and female genders. The stud­­y included 50 dry sacra (25 male and 25 female), which were obtained from the anatomy laboratory of our institution. It is observed in the present study that the mean S1 pedicle length was 49.9± 3.6 mm for male and 46.3± 4.8 mm for the female. The cephalocaudal heights of S1 pedicle were 27.2±4.0 mms and 23.9±3.7 mms for the male and female respectively. The anteroposterior width of S1 pedicle was 7.5± 1.3 mms, 7.5± 1.7 mms in males and females respectively. The anteroposterior distances of S1, from the sacral promontory to the spinous process of S1 were 52.9± 5.2 mms and 50.4± 6.8 mms respectively for the male and female genders. The present study observed that the mean S1 pedicle length and the cephalocaudal height were higher (p<0.05) for the males than that of females. The data (male vs female) were not found statistically different (p>0.05), with respect to the anteroposterior width of the S1 pedicle and the anteroposterior distances of S1 from the sacral promontory to the spinous process of S1. The present study has provided important morphometric data onto the pedicle of the first sacral vertebrae, from the anatomical samples of the South Indian population. The knowledge of pedicle diameters of S1 is crucial to the safe placement of screws in the posterior transpedicular screw fixation.


2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Andrea Sallent ◽  
Manuel Ramírez ◽  
Jordi Catalá ◽  
Alfonso Rodríguez-Baeza ◽  
Joan Bagó ◽  
...  

Abstract The aim is to design a patient-specific instrument (PSI) for multilevel cervical pedicle screw placement from C2 to C7, as well as verifying reliability and reproducibility. Computed tomography (CT) scans were obtained from 7 cadaveric cervical spines. Using Mimics software, semiautomatic segmentation was performed for each cervical spine, designing a 3D cervical spine bone model in order to plan transpedicular screw fixation. A PSI was designed according to the previously cited with two cannulated chimneys to guide the drill. The guides were 3D printed and surgeries performed at the laboratory. Postoperative scans were obtained to study screw placement. Sixty-eight transpedicular screws were available for study. 61.8% of all screws were within the pedicle or partially breached <4 mm. No differences were observed between cervical levels. None of these screws had neurovascular injury. Of the 27 screws with a grade 3 (screw outside the pedicle; 39.7%), only 2 had perforation of the transverse foramen and none of them would have caused a neural injury. In conclusion, multilevel PSI for cervical pedicle screw is a promising technology that despite showing improvements regarding free-hand technique requires further studies to improve the positioning of the PSI and their accuracy.


2018 ◽  
Vol 29 (4) ◽  
pp. 397-406 ◽  
Author(s):  
Pietro Scarone ◽  
Gabriele Vincenzo ◽  
Daniela Distefano ◽  
Filippo Del Grande ◽  
Alessandro Cianfoni ◽  
...  

OBJECTIVENavigation-enabling technology such as 3D-platform (O-arm) or intraoperative mobile CT (iCT-Airo) systems for use in spinal surgery has considerably improved accuracy over that of traditional fluoroscopy-guided techniques during pedicular screw positioning. In this study, the authors compared 2 intraoperative imaging systems with navigation, available in their neurosurgical unit, in terms of the accuracy they provided for transpedicular screw fixation in the thoracic and lumbar spine.METHODSThe authors performed a retrospective analysis of clinical and surgical data of 263 consecutive patients who underwent thoracic and lumbar spine screw placement in the same center. Data on 97 patients who underwent surgery with iCT-Airo navigation (iCT-Airo group) and 166 with O-arm navigation (O-arm group) were analyzed. Most patients underwent surgery for a degenerative or traumatic condition that involved thoracic and lumbar pedicle screw fixation using an open or percutaneous technique. The primary endpoint was the proportion of patients with at least 1 screw not correctly positioned according to the last intraoperative image. Secondary endpoints were the proportion of screws that were repositioned during surgery, the proportion of patients with a postoperative complication related to screw malposition, surgical time, and radiation exposure. A blinded radiologist graded screw positions in the last intraoperative image according to the Heary classification (grade 1–3 screws were considered correctly placed).RESULTSA total of 1361 screws placed in 97 patients in the iCT-Airo group (503 screws) and in 166 in the O-arm group (858 screws) were graded. Of those screws, 3 (0.6%) in the iCT-Airo group and 4 (0.5%) in the O-arm group were misplaced. No statistically significant difference in final accuracy between these 2 groups or in the subpopulation of patients who underwent percutaneous surgery was found. Three patients in the iCT-Airo group (3.1%, 95% CI 0%–6.9%) and 3 in the O-arm group (1.8%, 95% CI 0%–4.0%) had a misplaced screw (Heary grade 4 or 5). Seven (1.4%) screws in the iCT-Airo group and 37 (4.3%) in the O-arm group were repositioned intraoperatively (p = 0.003). One patient in the iCT-Airo group and 2 in the O-arm group experienced postoperative neurological deficits related to hardware malposition. The mean surgical times in both groups were similar (276 [iCT-Airo] and 279 [O-arm] minutes). The mean exposure to radiation in the iCT-Airo group was significantly lower than that in the O-arm group (15.82 vs 19.12 mSv, respectively; p = 0.02).CONCLUSIONSIntroduction of a mobile CT scanner reduced the rate of screw repositioning, which enhanced patient safety and diminished radiation exposure for patients, but it did not improve overall accuracy compared to that of a mobile 3D platform.


2017 ◽  
Vol 5 (2) ◽  
pp. 74
Author(s):  
AshishBalkrishna Patidar ◽  
RahulPushpendra Mehta ◽  
SantoshKumar Sharma ◽  
GorishankerBasantilal Vyas ◽  
Vivek Singh ◽  
...  

2016 ◽  
Vol 5 (3) ◽  
pp. 257-262
Author(s):  
Pai Nagaraja V. ◽  
◽  
Mutyal Shubhangi R. ◽  
Ambiye Medha V. ◽  
◽  
...  

2019 ◽  
Author(s):  
Bi Zhang ◽  
Zhenhai Zhou ◽  
Honggui Yu ◽  
Zhimin Pan ◽  
Rongping Zhou ◽  
...  

Abstract Background: Cervical spinal cord injury(CSCI) without major fracture or dislocation is often described as cervical SCI without radiographic abnormality (SCIWORA). Majority of this injury could be without radiographic abnormality but with disrupted anterior longitudinal ligament or intervertebral disc unless examined by MRI. The optimal surgical management of this cervical spinal cord injury remains controversial. This study is to evaluate the clinical advantages of laminoplasty combined with short-segment transpedicular screw fixation for managing this issue. Methods: SCIWORA patients were collected into two groups according to different surgical methods. Patients in group A received laminoplasty combined with transpedicular screw fixation, and patients in group B received anterior cervical fusion combined with laminoplasty. All cervical spine were assessed by X-ray, CT, MRI preoperatively and postoperatively to evaluate the decompression range, bonegraft fusion and instruments location. ASIA grade and JOA score were recorded to assess the neurological function recovery. Complications, surgery time, intraoperative blood loss and hospital stay were compared between two groups. Mean follow-up was at least 2 years. Results: In this study, Forty eight patients were in group A and 54 ones were in group B. All cases were decompressed fully and obtained fusion 6-month postoperatively. The ASIA grade was improved postoperatively, but no significantly different between two groups (p=0.907). The JOA was 6.12±1.76 preoperatively and improved to 11.98±2.98 postoperatively with the 53.13% neurofunction recovery rate in group A, with no significantly different compared with group B(vs 6.63±2.45, p=0.235; vs 12.62±3.59, p=0.303; vs 57.76%, p=0.590)respectively. Total 18 complications occurred but the occurrence was significant lower in group A(p=0.020). The average surgery time was 2.2±0.32 hours, intraoperative blood loss was 304±56ml and hospital stay was 8.2±3.1 days, significantly decreased compared with group B(vs 3.1±0.29, p=0.000; vs 388±61ml, p=0.000; vs 12±2.8days, p=0.000)respectively. Conclusions: Cervical laminoplasty combined with short-segment transpedicular screw fixation is a reliable option to treat SCIWORA patients with CSS. The advantages include achieving sufficient cervical decompression, maintaining cervical stability and avoiding extra anterior cervical fusion which increases surgery time, intraoperative blood loss, postoperative complications and hospital stay.


2005 ◽  
Vol 15 (3) ◽  
pp. 327-334 ◽  
Author(s):  
E. Kast ◽  
K. Mohr ◽  
H.-P. Richter ◽  
W. Börm

Sign in / Sign up

Export Citation Format

Share Document