Performance of steel moment-resisting frames in post-earthquake horizontally traveling fire

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Amit Chandra ◽  
Anjan Bhowmick ◽  
Ashutosh Bagchi
Keyword(s):  
Residual Deformation ◽  
Time History ◽  
Primary Objective ◽  
Nonlinear Time History Analysis ◽  
Content Type ◽  
Design Fire ◽  
Heating And Cooling ◽  
Modes Of Failure ◽  
Wide Range ◽  
Moment Resisting

PurposeThe study investigates the performance of a three-story unprotected steel moment-resisting frame (SMRF) designed for high seismic demand in the fire-only (FO) and post-earthquake uniform and traveling fires (PEF). The primary objective is to investigate the effects of seismic residual deformation on the structure's performance in horizontally traveling fires. The traveling fire methodology, unlike conventional fire models, considers a spatially varying temperature environment.Design/methodology/approachMulti-step finite element simulations were carried out on undamaged and damaged frames to provide insight into the effects of the earthquake-initiated fires on the local and global behavior of SMRF. The earthquake simulations were conducted using nonlinear time history analysis, whereas the structure in the fire was investigated by sequential thermal-structural analysis procedure in ABAQUS. The frame was subjected to a suite of seven ground motions. In total, four horizontal traveling fire sizes were considered along with the Eurocode (EC) parametric fire for a comparison. The deformation history, axial force and moment variation in the critical beams and columns of affected compartments in the fire heating and cooling regimes were examined. The global structural performance in terms of inter-story drifts in FO and PEF scenarios was investigated.FindingsIt was observed that the larger traveling fires (25 and 48%) are more detrimental to the case study frame than the uniform EC parametric fire. Besides, no appreciable difference was observed in time and modes of failure of the structure in FO and PEF scenarios within the study's parameters.Originality/valueThe present study considers improved traveling fire methodology as an alternate design fire for the first time for the PEF performance of SMRF. The analysis results add to the much needed database on structures' performance in a wide range of fire scenarios.

Seismic Performance and Effects of Different Joint Shapes for Unbonded Precast Segmental Bridge Columns

2016 ◽  
Vol 32 (4) ◽  
pp. 427-433
Author(s):  
H.-L. Wang ◽  
S.-W. Liu ◽  
Z. Zhang
Keyword(s):  
Seismic Performance ◽  
Residual Deformation ◽  
Time History ◽  
Bridge Columns ◽  
Nonlinear Time History Analysis ◽  
Backbone Curve ◽  
Coulomb’S Friction ◽  
Plane Contact ◽  
Nonlinear Time History ◽  
Segmental Bridge

AbstractTo study the seismic performance and the effects of different joint shapes for unbonded precast segmental bridge columns under low-reversed cyclic loading, two 3-D finite element (FE) models respectively using plane-contact joints and shear resistant joints were established. In the FE models, the mechanical behaviors of concrete and tendons were respectively described by the damage-plastic model and the bilinear model, and the contact criteria was based on Coulomb's Friction. The results of nonlinear time history analysis showed that the deformation of the columns was mainly composed of alternately open-closed joints, and the failure of the column was mainly caused by concrete crush on the bottom segment. Compared with two model's hysteresis loop, backbone curve, ductility and residual deformation, it was found that the column with shear resistant joints had longer stable period of strength, better ductility, and smaller residual displacement than the column with plane-contact joints, so it had better seismic performance.

Seismic assessment and upgrade of Type 2 construction steel moment-resisting frames built in Canada between the 1960s and 1980s using passive supplemental damping

2013 ◽  
Vol 40 (7) ◽  
pp. 644-654 ◽  
Author(s):  
Nikolas Kyriakopoulos ◽  
Constantin Christopoulos
Keyword(s):  
Time History ◽  
Nonlinear Time History Analysis ◽  
Experimental Program ◽  
Steel Moment Resisting Frames ◽  
Construction Steel ◽  
Moment Resisting ◽  
Interstorey Drift ◽  
Supplemental Damping ◽  
Nonlinear Time History

The seismic performance of a typical 1960s Type 2 construction steel moment-resisting frame hospital structure designed only for lateral wind loads was investigated. The structure was found to have a soft first storey and displayed large P–Δ sensitivities. An experimental program determined that the connections had considerable inherent ductility and were stable up to 2.0% interstorey drift, despite not having been designed for a ductile cyclic response. The structure was numerically modelled using advanced strength degradation considerations. A nonlinear time-history analysis was conducted using Montreal and Vancouver ground motions and the structure’s performance was found to be inadequate under the considered design hazard levels. Retrofits were proposed for the two orthogonal frames using a performance-based approach and supplemental damping, rather than local interventions to increase the ductility of these connections, and the performance of the final retrofit designs were investigated numerically to confirm that the desired performance levels were achieved.

scholarly journals Special Moment Resistant Steel Buildings

2021 ◽  
pp. 444-448
Author(s):  
Deepan Dev B ◽  
Dr V Selvan
Keyword(s):  
Pushover Analysis ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Building Structures ◽  
Braced Frames ◽  
Steel Buildings ◽  
Braced Frame ◽  
Moment Resisting ◽  
Frame Systems ◽  
Nonlinear Time History

The seismic response of special moment-resisting frames (SMRF), buckling restrained braced (BRB) frames and self-centering energy dissipating (SCED) braced frames is compared when used in building structures many stories in height. The study involves pushover analysis as well as 2D and 3D nonlinear time history analysis for two ground motion hazard levels. The SCED and BRB braced frames generally experienced similar peak interstory drifts. The SMRF system had larger interstory drifts than both braced frames, especially for the shortest structures. The SCED system exhibited a more uniform distribution of the drift demand along the building height and was less prone to the biasing of the response in one direction due to P-Delta effects. The SCED frames also had significantly smaller residual lateral deformations. The two braced frame systems experienced similar interstory drift demand when used in torsional irregular structures.

Distribution of accumulated irrecoverable hysteretic energy in MDOF structures

2018 ◽  
Vol 14 (2) ◽  
pp. 202-215
Author(s):  
Bing Bing Tu ◽  
Dong Zhao
Keyword(s):  
Evaluation Method ◽  
Time History ◽  
Nonlinear Time History Analysis ◽  
Distribution Law ◽  
Single Degree Of Freedom ◽  
Content Type ◽  
Hysteretic Energy ◽  
Balance Principle ◽  
History Analysis ◽  
Nonlinear Time History

Purpose The study of the character of structural hysteretic energy under earthquake is an essential foundation for energy-based seismic design and evaluation method. The purpose of this paper is to explore the distribution law of the accumulative irrecoverable hysteretic energy for MDOF structures, a formula of the accumulated irrecoverable hysteretic energy ratio along the layers is derived. Design/methodology/approach The procedure is based on the energy balance principle and the concept of the equivalent single-degree-of-freedom system. Furthermore, sensitivity analysis is carried out for 16 working conditions, considering all these possibilities of local failure or damage. And then the sensitivity influencing rule is obtained and the proposed formula is simplified. Findings Finally, the validation of the proposed formula is investigated through comparisons with the nonlinear time-history analysis results. Originality/value The proposed formula can be effectively to estimate the distribution of the hysteretic energy under a given ground motion.

Finite element analysis of lightweight concrete-filled LSF walls exposed to realistic design fire

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Irindu Upasiri ◽  
Chaminda Konthesingha ◽  
Anura Nanayakkara ◽  
Keerthan Poologanathan ◽  
Gatheeshgar Perampalam ◽  
...  
Keyword(s):  
Lightweight Concrete ◽  
Fire Exposure ◽  
Fire Performance ◽  
Content Type ◽  
Design Fire ◽  
Standard Fire ◽  
Heating And Cooling ◽  
Cooling Phase ◽  
Concrete Filling ◽  
Design Fires

PurposeLight-Gauge Steel Frame (LSF) structures are popular in building construction due to their lightweight, easy erecting and constructability characteristics. However, due to steel lipped channel sections negative fire performance, cavity insulation materials are utilized in the LSF configuration to enhance its fire performance. The applicability of lightweight concrete filling as cavity insulation in LSF and its effect on the fire performance of LSF are investigated under realistic design fire exposure, and results are compared with standard fire exposure.Design/methodology/approachA Finite Element model (FEM) was developed to simulate the fire performance of Light Gauge Steel Frame (LSF) walls exposed to realistic design fires. The model was developed utilising Abaqus subroutine to incorporate temperature-dependent properties of the material based on the heating and cooling phases of the realistic design fire temperature. The developed model was validated with the available experimental results and incorporated into a parametric study to evaluate the fire performance of conventional LSF walls compared to LSF walls with lightweight concrete filling under standard and realistic fire exposures.FindingsNovel FEM was developed incorporating temperature and phase (heating and cooling) dependent material properties in simulating the fire performance of structures exposed to realistic design fires. The validated FEM was utilised in the parametric study, and results exhibited that the LSF walls with lightweight concrete have shown better fire performance under insulation and load-bearing criteria in Eurocode parametric fire exposure. Foamed Concrete (FC) of 1,000 kg/m3 density showed best fire performance among lightweight concrete filling, followed by FC of 650 kg/m3 and Autoclaved Aerated Concrete (AAC) 600 kg/m3.Research limitations/implicationsThe developed FEM is capable of investigating the insulation and load-bearing fire ratings of LSF walls. However, with the availability of the elevated temperature mechanical properties of the LSF wall, materials developed model could be further extended to simulate the complete fire behaviour.Practical implicationsLSF structures are popular in building construction due to their lightweight, easy erecting and constructability characteristics. However, due to steel-lipped channel sections negative fire performance, cavity insulation materials are utilised in the LSF configuration to enhance its fire performance. The lightweight concrete filling in LSF is a novel idea that could be practically implemented in the construction, which would enhance both fire performance and the mechanical performance of LSF walls.Originality/valueLimited studies have investigated the fire performance of structural elements exposed to realistic design fires. Numerical models developed in those studies have considered a similar approach as models developed to simulate standard fire exposure. However, due to the heating phase and the cooling phase of the realistic design fires, the numerical model should incorporate both temperature and phase (heating and cooling phase) dependent properties, which was incorporated in this study and validated with the experimental results. Further lightweight concrete filling in LSF is a novel technique in which fire performance was investigated in this study.

Effect of Column Base Behavior on Seismic Performance of Multi-Story Steel Moment Resisting Frames

2018 ◽  
Vol 19 (01) ◽  
pp. 1940007 ◽  
Author(s):  
Yao Cui ◽  
Fengzhi Wang ◽  
Satoshi Yamada
Keyword(s):  
Plastic Deformation ◽  
Local Buckling ◽  
Time History ◽  
Thickness Ratio ◽  
Nonlinear Time History Analysis ◽  
Steel Moment Resisting Frames ◽  
Moment Resisting Frames ◽  
Moment Resisting ◽  
The Moment ◽  
Column Base

Column base is one of the most important elements of steel structures. Exposed column base is commonly used in low-to-medium-rise steel moment resisting frames because of better constructability and low cost. To study the effect of exposed column base behavior on the seismic behavior of low-to-medium-rise steel moment resisting frames, a four-story, four-bay steel moment frame is studied by the nonlinear time history analysis. In the numerical analysis, two types of column base connections (rigid and semi-rigid) are considered. The width–thickness ratio of column and stiffness ratio of column base to column are chosen as the analysis parameters. The characteristics of structural responses, hysteresis loops, and the distribution of plastic energy dissipation are compared. It indicates that the collapse margin ratio is significantly increased when the exposed column base behavior is considered for the moment resisting frames with large width–thickness ratio. Moreover, if the column base connection is allowed to rotate and transfer a portion of the moment, the demand of plastic deformation capacity of steel columns is reduced, then subsequently strength deterioration caused by the local buckling at the bottom of column could be avoided. Also, the whole structure has a better ductility, the ability of plastic deformation and energy absorbance of the moment resisting frame under earthquake are therefore enhanced. The structure with the semi-rigid column base connection has larger potential to avoid the structural collapse caused by the local buckling of first-story columns.

scholarly journals Transfer of Plasmid DNA to Clinical Coagulase-Negative Staphylococcal Pathogens by Using a Unique Bacteriophage

2015 ◽  
Vol 81 (7) ◽  
pp. 2481-2488 ◽  
Author(s):  
Volker Winstel ◽  
Petra Kühner ◽  
Bernhard Krismer ◽  
Andreas Peschel ◽  
Holger Rohde
Keyword(s):  
Plasmid Dna ◽  
Genetic Manipulation ◽  
Current Knowledge ◽  
Virulence Determinants ◽  
Coagulase Negative Staphylococci ◽  
Reliable Technique ◽  
Content Type ◽  
Research Activities ◽  
Wide Range ◽  
Genetic Barriers

ABSTRACTGenetic manipulation of emerging bacterial pathogens, such as coagulase-negative staphylococci (CoNS), is a major hurdle in clinical and basic microbiological research. Strong genetic barriers, such as restriction modification systems or clustered regularly interspaced short palindromic repeats (CRISPR), usually interfere with available techniques for DNA transformation and therefore complicate manipulation of CoNS or render it impossible. Thus, current knowledge of pathogenicity and virulence determinants of CoNS is very limited. Here, a rapid, efficient, and highly reliable technique is presented to transfer plasmid DNA essential for genetic engineering to important CoNS pathogens from a uniqueStaphylococcus aureusstrain via a specificS. aureusbacteriophage, Φ187. Even strains refractory to electroporation can be transduced by this technique once donor and recipient strains share similar Φ187 receptor properties. As a proof of principle, this technique was used to delete the alternative transcription factor sigma B (SigB) via allelic replacement in nasal and clinicalStaphylococcus epidermidisisolates at high efficiencies. The described approach will allow the genetic manipulation of a wide range of CoNS pathogens and might inspire research activities to manipulate other important pathogens in a similar fashion.

Dynamic Characteristics of Base-Isolated Steel Frame under Seismic Ground Motion

2011 ◽  
Vol 255-260 ◽  
pp. 2341-2344
Author(s):  
Mohammad Saeed Masoomi ◽  
Siti Aminah Osman ◽  
Ali Jahanshahi
Keyword(s):  
Ground Motion ◽  
Base Isolation ◽  
Time History ◽  
Steel Structure ◽  
Steel Structures ◽  
Steel Frame ◽  
Nonlinear Time History Analysis ◽  
Seismic Load ◽  
Vector Method ◽  
Seismic Ground Motion

This paper presents the performance of base-isolated steel structures under the seismic load. The main goals of this study are to evaluate the effectiveness of base isolation systems for steel structures against earthquake loads; to verify the modal analysis of steel frame compared with the hand calculation results; and development of a simulating method for base-isolated structure’s responses. Two models were considered in this study, one a steel structure with base-isolated and the other without base-isolated system. The nonlinear time-history analysis of both structures under El Centro 1940 seismic ground motion was used based on finite element method through SAP2000. The mentioned frames were analyzed by Eigenvalue method for linear analysis and Ritz-vector method for nonlinear analysis. Simulation results were presented as time-acceleration graphs for each story, period and frequency of both structures for the first three modes.

Sign in / Sign up

Export Citation Format

Share Document