Removal of methylene blue using balanites aegyptiaca bark powder as low-cost and eco-friendly biosorbent

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ibrahim A. Amar ◽  
Salma M. Hassan ◽  
Fatima H. Aqeela ◽  
Mohamed Y. Najem ◽  
Fatima A. Altohami
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Point Of Zero Charge ◽  
Solution Temperature ◽  
Textile Dye ◽  
Solution Ph ◽  
Balanites Aegyptiaca ◽  
Experimental Conditions ◽  
Content Type ◽  
Kinetics And Isotherms

Purpose This paper aims to investigate the potential application of Balanites aegyptiaca bark powder (BABP) for removing a basic textile dye, methylene blue (MB), from aqueous solutions. Design/methodology/approach The biosorbent (BABP) was characterized using Fourier transform infrared spectroscopy (FTIR) and point of zero charge (pHPZC). Batch mode was selected to study the biosorption of MB onto BABP surface at different experimental conditions (shaking speed, contact time, initial solution pH, ionic strength, solution temperature, biosorbent dosage and initial dye concentration). Besides, the reusability of BABP for MB biosorption was also examined. Findings The biosorption results revealed that approximately 96% of MB was removed successfully at the optimized operational conditions. Pseudo-second-order and Langmuir models, respectively, better described the adsorption kinetics and isotherms. The monolayer biosorption capacity (qmax) for MB was about 97.09 mg/g. According to thermodynamics findings, the MB biosorption onto BABP is an exothermic and spontaneous process. The results demonstrate that BABP can be considered as potential eco-friendly, readily available and low-cost biosorbent for hazardous textile dyes removal from water bodies and also provides a promising method for minimization of agricultural solid wastes (e.g. plant barks). Originality/value The utilization of Balanites aegyptiaca bark powder (BABP), solid waste material, as low-cost and eco-friendly biosorbent for the removal of hazardous basic textile dye (methylene blue) from the aquatic environment.

scholarly journals Biosorption Removal of Methylene Blue Dye from Aqueous Solutions using Phosphoric Acid-Treated Balanites Aegyptiaca Seed Husks Powder

2021 ◽  
Vol 12 (6) ◽  
pp. 7845-7862
Keyword(s):  
Methylene Blue ◽  
Phosphoric Acid ◽  
Low Cost ◽  
Solution Temperature ◽  
Blue Dye ◽  
Solution Ph ◽  
Balanites Aegyptiaca ◽  
Batch Mode ◽  
Pseudo Second Order ◽  
Adsorption Kinetics And Isotherm

Water contamination caused by the presence of synthetic dye is one of the world's major environmental concerns. This work aims to explore the potential application of non-carbonized phosphoric acid-treated Balanites aegyptiaca "heglig" seed husks powder (BASHP) as a bio-sorbent for methylene blue (MB) removal from water bodies. BASHP was characterized using Fourier transform infrared spectroscopy (FTIR). The characteristics of BASHP, such as the iodine number, point of zero charges, solubility, and specific surface area (SMB) were also estimated. The biosorption of MB onto the BASHP surface was studied in batch mode under various conditions (contact time, shaking speed, solution temperature, initial solution pH, ionic strength, initial dye concentration, and biosorbent dosage). The adsorption kinetics and isotherm were better described by pseudo-second-order and Langmuir models, respectively. More than 97% of MB was removed, and the maximum biosorbed amount of MB (qmax) was 72.99 mg/g. Thermodynamics findings revealed that the proposed biosorption is an endothermic and spontaneous process. These findings showed that BASHP is a potentially eco-friendly, easily available, and low-cost material for removing hazardous dyes (e.g., methylene blue) from an aquatic environment, as well as a promising method for reducing agricultural solid waste (e.g., seed husks).

Adsorptive removal of congo red dye from aqueous solutions using Mo-doped CoFe2O4 magnetic nanoparticles

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ibrahim A. Amar ◽  
Jawaher O. Asser ◽  
Amina S. Mady ◽  
Mabroukah S. Abdulqadir ◽  
Fatima A. Altohami ◽  
...  
Keyword(s):  
Magnetic Nanoparticles ◽  
Aqueous Solutions ◽  
Congo Red ◽  
Organic Pollutant ◽  
Point Of Zero Charge ◽  
Solution Temperature ◽  
Anionic Dyes ◽  
Content Type ◽  
Kinetics And Isotherms ◽  
Nano Adsorbent

Purpose The main purpose of this paper is to investigate the adsorption properties of CoFe1.9Mo0.1O4 magnetic nanoparticles (CFMo MNPs) using, anionic dye “congo red (CR)” as a model of water pollutants. Design/methodology/approach The magnetic nano-adsorbent was synthesized via sol-gel process. Different techniques including; Fourier transform infrared spectroscopy, point of zero charge, scanning electron microscope and X-ray powder diffraction were used to characterize the prepared adsorbent. Adsorption experiments were conducted in batch mode under various conditions (contact time, shaking speed, initial dye concentration, initial solution pH, solution temperature and adsorbent amount) to investigate the adsorption capability of CFMo MNPs for CR. Findings The results showed that, CFMo MNPs could successfully remove more than 90% of CR dye within 20 min. Adsorption kinetics and isotherms were better described using pseudo-second-order (PSO) and Langmuir models, respectively. The maximum adsorbed amount (qmax) of CR dye was 135.14 mg/g. The adsorption process was found to be endothermic and spontaneous in nature as demonstrated by the thermodynamics ( ΔGo, ΔHoand ΔSo). Practical implications This study provided a good example of using an easily separated magnetic nano-adsorbent for fast removal of a very toxic organic pollutant, congo red, from the aquatic environment Originality/value The employment of Mo-doped cobalt ferrite for the first time for removing hazardous anionic dyes such as congo red from their aqueous solutions.

Insights into the mechanism of methylene blue removed by novel and classic biochars

2019 ◽  
Vol 79 (8) ◽  
pp. 1561-1570
Author(s):  
Wei Chen ◽  
Fengting Chen ◽  
Bin Ji ◽  
Lin Zhu ◽  
Hongjiao Song
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Ph Value ◽  
Low Cost ◽  
Underlying Mechanism ◽  
Maximum Adsorption Capacity ◽  
Experimental Conditions ◽  
Average Pore ◽  
Adsorption Effect ◽  
Magnolia Grandiflora

Abstract The adsorption behavior and the underlying mechanism of methylene blue (MB) sorption on biochars prepared from different feedstocks at 500 °C were evaluated. The biochar feedstocks included Magnolia grandiflora Linn. leaves biochar (MBC), pomelo (Citrus grandis) peel biochar (PBC) and badam shell biochar (BBC). The results of characterizing and analyzing the samples showed that different biochars had different effects on the adsorption of MB. It could be found that MBC had the best adsorption effect on MB due to its largest average pore diameter of 5.55 nm determined by Brunauer-Emmett-Teller analysis. Under the optimal conditions, the maximum adsorption capacities of BBC, PBC and MBC were 29.7, 85.15 and 99.3 mg/g, respectively. The results showed that the amount of adsorption was affected by the pH value. The maximum adsorption capacity of MBC was 46.99 mg/g when it was at pH of 3, whereas for the same experimental conditions the maximum adsorption capacity of BBC and PBC was 25.29 mg/g at pH of 11 and 36.08 mg/g at pH of 7, respectively. Therefore, MBC was found to be a most efficient low-cost adsorbentl for dye wastewater treatment compared with BBC and PBC, and it had the best removal effect under acidic conditions.

Kinetics and Isotherms Studies of methylene blue Basic Dye from Aqueous Solution onto Selenicereus grandiflorus Activated Carbon

2019 ◽  
Vol 4 (1-2) ◽  
pp. 1-6
Author(s):  
M. Mahadeva Swamy ◽  
B.M. Nagabhushana ◽  
Nagaraju Kottam
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Activated Carbon ◽  
Point Of Zero Charge ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Batch Mode ◽  
Adsorption Studies ◽  
Kinetics And Isotherms ◽  
Adsorbent Dose

The present experiment explains the effectiveness of adsorption studies of methylene blue dye from aqueous solutions on activated carbon from Selenicereus grandiflorus (SG) treated with conc. sulfuric acid. The sulphuric acid-treated Selenicereus grandiflorus activated carbon (SGAC) was used as low-cost adsorbent for the removal of methylene blue dye from aqueous solution. It suggests an ideal alternative method to adsorption of dye compared to other expensive treatment options. The adsorption studies have been conducted at different experimental parameters, i.e., pH, contact time, adsorbent dose and initial dye concentration. The batch mode experiments were conducted by different adsorbent dose (0.03-0.150 g per 50 mL), pH of the solution (2-12), effect of time (3-18 min), initial dye concentration (10 mg/L), point of zero charge and regeneration of spent adsorbent studies. Langmuir model shows better fit to the equilibrium data (R2 = 0.966) than Freundlich model. The adsorption capacity (Qm) of SGAC increases with increasing dosage where Qm is 16.17 mg g-1.

Assessment of Urtica as a low-cost adsorbent for methylene blue removal: kinetic, equilibrium, and thermodynamic studies

2015 ◽  
Vol 69 (7) ◽  
Author(s):  
Mohammad Peydayesh ◽  
Mojgan Isanejad ◽  
Toraj Mohammadi ◽  
Seyed Mohammad Reza Seyed Jafari
Keyword(s):  
Methylene Blue ◽  
Adsorption Process ◽  
Low Cost ◽  
Cost Effective ◽  
Sem Analysis ◽  
Order Kinetic ◽  
Solution Ph ◽  
Factors Affecting ◽  
Order Kinetic Model ◽  
Mb Adsorption

AbstractMethylene blue (MB) removal using eco-friendly, cost-effective, and freely available Urtica was investigated. The morphology of the adsorbent surface and the nature of the possible Urtica and MB interactions were examined using SEM analysis and the FTIR technique, respectively. Various factors affecting MB adsorption such as adsorption time, initial MB concentration, temperature, and solution pH were investigated. The adsorption process was analysed using different kinetic models and isotherms. The results showed that the MB adsorption kinetic follows a pseudo-second-order kinetic model and the isotherm data fit the Langmuir isotherm well. Thermodynamic parameters, such as ΔG°, ΔH°, and ΔS°, were also evaluated, and the results indicated that the adsorption process is endothermic and spontaneous in nature. The MB adsorption capacity of Urtica was found to be as high as 101.01 mg g

scholarly journals Methylene blue removal using a low-cost activated carbon adsorbent from tobacco stems: kinetic and equilibrium studies

2017 ◽  
Vol 75 (10) ◽  
pp. 2390-2402 ◽  
Author(s):  
Bellington Mudyawabikwa ◽  
Henry H. Mungondori ◽  
Lilian Tichagwa ◽  
David M. Katwire
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Radiation Power ◽  
Low Cost ◽  
Carbon Adsorbent ◽  
Point Of Zero Charge ◽  
Order Kinetic ◽  
Optimum Conditions ◽  
Equilibrium Studies ◽  
Mb Adsorption

The aim of this study was to prepare activated carbon from tobacco stalks using microwave heating. The prepared activated carbon was applied as an adsorbent in methylene blue (MB) removal from water. The optimum conditions for activated carbon preparation were a radiation power of 280 W for a period of 6 minutes after the impregnation of the precursor material with 30% ZnCl2 for 24 hours. The activated carbon yield and iodine number were 49.43% and 1,264.51 mg/g respectively. The activated carbon also had a point of zero charge of 5.81 with an adsorption capacity of 123.45 mg/g for MB. The optimum conditions for MB adsorption were a pH of 6.5 with an adsorbent dosage of 0.2 g/50 mL at 25 °C. The MB adsorption kinetics followed the pseudo second order kinetic model with the intra-particle diffusion model suggesting a two-step adsorption mechanism. The adsorption data also fitted well within the Langmuir adsorption isotherm model. Tobacco stalks can successfully be turned into an economically important product.

scholarly journals Optimization of Methylene Blue Adsorption on Agricultural Solid Waste Using Box–Behnken Design (BBD) Combined with Response Surface Methodology (RSM) Modeling

2021 ◽  
Vol 12 (4) ◽  
pp. 4567-4583
Keyword(s):  
Methylene Blue ◽  
Response Surface Methodology ◽  
Response Surface ◽  
Contact Time ◽  
Organic Dyes ◽  
Low Cost ◽  
Sem Analysis ◽  
Solution Ph ◽  
Box Behnken Design ◽  
Mb Adsorption

Tunics corm saffron (TCS) is a low-cost adsorbent that removes methylene blue (MB) from an aqueous solution. The TCS was characterized using FTIR and SEM analysis. The influence of MB adsorption variables such as TCS dose (0.4–2.4 g L−1), contact time (0–120 min), MB dye concentration (100–500 mg L−1) was optimized Box–Behnken design (BBD) combined with response surface methodology (RSM) modeling. All three variables among the main parameters significantly affected the removal efficiency by applying the quadratic regression analysis. The results showed that the predicted values for MB adsorption were close to the experimental values and were in good agreement. Besides, the r2 value (r2=0.970) indicates that the regression can predict response for the adsorption process in the studied range. The optimum BBD-RSM for MB removal of 89.48 % was recorded at a TCS dose of 1.78 g L−1, contact time of 56 min, MB dye concentration of 176 mg L–1 at solution pH of 5.4 temperature 21 °C. Excellent regeneration of TCS to remove MB in sixth consecutive adsorption-desorption cycles. This work highlights that TCS offers tremendous potential as a low-cost for organic dyes removal from wastewaters.

scholarly journals Coriandrum Sativum seeds as a green low-cost biosorbent for methylene blue dye removal from aqueous solution: spectroscopic, kinetic and thermodynamic studies

2018 ◽  
Vol 7 (3) ◽  
pp. 204-216
Author(s):  
Lamya Kadiri ◽  
Abdelkarim Ouass ◽  
Youness Essaadaoui ◽  
El Housseine Rifi ◽  
Ahmed Lebkiri
Keyword(s):  
Methylene Blue ◽  
Low Cost ◽  
Coriandrum Sativum ◽  
Blue Dye ◽  
Solution Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Adsorption Rates ◽  
Efficient Power

Coriandrum sativum seeds (CSS) were investigated as a new eco-friendly and economic biosorbent for the removal of methylene blue (MB) dye from synthetic solutions. First, the spectroscopic analyses were effectuated using FTIR and SEM to confirm the possibility of CSS to remove MB dye from aqueous solutions. The study of the influence of different parameters, such as contact time, CSS mass, solution pH, MB concentration, and temperature was realized and proved the rapid and efficient power adopted by CSS as a removal of the studied dye. Also, the regeneration study was effectuated for four cycles with excellent adsorption rates. The modeling studies revealed that the studied process obeys the pseudo-second-order model and Langmuir isotherm model. The adsorption amount was found to be 107.53 mg/g. Finally, the determination of thermodynamic parameters indicated the exothermic and spontaneous type of the removal process of MB onto CSS.

Adsorption of Methylene Blue by Hydroxyl-Aluminum Pillared Montmorillonite

2020 ◽  
Vol 42 (4) ◽  
pp. 550-550
Author(s):  
Houria Rezala Houria Rezala ◽  
Houda Douba Houda Douba ◽  
Horiya Boukhatem and Amaya Romero Horiya Boukhatem and Amaya Romero
Keyword(s):  
Methylene Blue ◽  
Nitrogen Adsorption ◽  
Bet Surface Area ◽  
Basal Spacing ◽  
Solution Ph ◽  
X Ray ◽  
Pillared Montmorillonite ◽  
Pseudo Second Order ◽  
Adsorption Desorption ◽  
Kinetics And Isotherms

A purified raw montmorillonite and hydroxy-aluminum pillared montmorillonite have been prepared from a natural bentonite from Maghnia, Algeria. These materials have been analyzed by X-ray fluorescence spectroscopy, X-ray diffraction, Infrared spectroscopy and nitrogen adsorption-desorption measurement. The pillared montmorillonite provided a certain increase of interlayer basal spacing and BET surface area and consequently the improvement of its capacities adsorption and decolorization of Methylene Blue. The adsorption properties of these materials were studied as a function of contact time, solution pH, initial Methylene Blue concentration and temperature. The adsorption kinetics and isotherms were well fitted by pseudo-second order and Freundlich models, respectively. In addition to that, thermodynamic studies showed an exothermic and a spontaneous process.

Preferentially grown nanostructured iron disulfide (FeS2) for removal of industrial pollutants

RSC Advances ◽  
2016 ◽  
Vol 6 (101) ◽  
pp. 99120-99128 ◽  
Author(s):  
Gurpreet Kaur ◽  
Bikramjeet Singh ◽  
Paviter Singh ◽  
Manpreet Kaur ◽  
Karmjeet Kaur Buttar ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Hydrothermal Method ◽  
Low Cost ◽  
Cost Effective ◽  
Textile Dye ◽  
Industrial Pollutants ◽  
Iron Disulfide

Preferentially grown nanostructured iron disulfide pyrite (111) was successfully synthesized using a low cost effective hydrothermal method, then employed as a photocatalyst for degradation of methylene blue and the textile dye Synazol Yellow K-HL.

Sign in / Sign up

Export Citation Format

Share Document