The Pab Formation of Zamzama block, lying in the Lower Indus Basin of Pakistan, is a prominent gas-producing sand reservoir. The optimized production is limited by water encroachment in producing wells, thus it is required to distinguish the gas-sand facies from the remainder of the wet sands and shales for additional drilling zones. An approach is adopted based on a relation between petrophysical and elastic properties to characterize the prospect locations. Petro-elastic models for the identified facies are generated to discriminate lithologies in their elastic ranges. Several elastic properties, including p-impedance (11,600-12,100 m/s*g/cc), s-impedance (7,000-7,330 m/s*g/cc), and Vp/Vs ratio (1.57-1.62), are calculated from the simultaneous prestack seismic inversion, allowing the identification of gas sands in the field. Furthermore, inverted elastic attributes and well-based lithologies are incorporated into the Bayesian framework to evaluate the probability of gas sands. To better determine reservoir quality, bulk volumes of PHIE and clay are estimated using elastic volumes trained on well logs employing Probabilistic Neural Networking (PNN), which effectively handles heterogeneity effects. The results showed that the channelized gas-sands passing through existing well locations exhibited reduced clay content and maximum effective porosities of 9%, confirming the reservoir's good quality. Such approaches can be widely implemented in producing fields to completely assess litho-facies and achieve maximum production with minimal risk.
Gas-bearing sands appraisal for Zamzama Gas field in Pakistan through inverted elastic attributes assisted with PNN approximation of petrophysical properties