Jiama is a super-large porphyry copper–polymetallic deposit located in the Gangdese metallogenic belt of southern Tibet. The deposit consists of a combination of a polymetallic skarn, Cu–Mo mineralization at the contact between the Jiama Porphyry and hornfels, and distal Au mineralization in fault. The current metal reserves are 7.4 Mt Cu, 0.6 Mt Mo, 1.8 Mt Pb–Zn, 6.65 Moz Au, and 360.32 Moz Ag, with a skarn to porphyry–hornfels host-rock ratio of ~3:1. Based on detailed field and laboratory investigations, this paper indicates that: (i) the skarn and porphyry–hornfels orebodies are almost entirely preserved; (ii) the emplacement age of the Cu-bearing plutonic rocks is earlier than the plutons containing elevated Mo assays; (iii) the permeability of the wall rocks gradually decreases in an upward direction; (iv) the fluid temperature during the precipitation of Cu was higher than that of the Mo mineralization; (v) the lithospheric pressure during the precipitation of Cu and Mo was the same; (vi) the laser Raman spectroscopy shows that the fluid carrying the Cu was rich in magnetite, hematite, and anhydrite, and the fluid carrying Mo was rich in pyrite, CO2, and CH4; and (vii) the SR–XRF mapping shows that the concentration of Cu in the mineralizing fluid was high and that of Mo was low when Cu was deposited. Conversely, the concentration of Cu was relatively low and the concentration of Mo was relatively high during deposition of the Mo. This study also shows that the temporal and spatial separation of Cu and Mo in the porphyry copper–polymetallic deposit at Jiama was associated with the emplacement of the Jiama Porphyry. Transportation of mineralized fluid was controlled by the permeability of the wall rocks, and deposition of the metals related to changes along a redox front and pressure releases during hydrothermal brecciation at the roof of the Jiama Porphyry.
Temporal–Spatial Separation of Cu from Mo in the Jiama Porphyry Copper–Polymetallic Deposit, Southern Tibet, China
