Enhanced sound absorption properties of porous ceramics modified by graphene oxide films

Author(s):  
Chao He ◽  
Bin Du ◽  
Juan Ma ◽  
Hao Xiong ◽  
Junjie Qian ◽  
...  
2019 ◽  
Vol 50 (4) ◽  
pp. 512-525
Author(s):  
Huan Liu ◽  
Baoqi Zuo

Blend films based on polyvinyl alcohol/polyethylene oxide (70/30 wt%) undoped and doped with different concentration of graphene oxide were prepared by spiral vane electrospinning. Characteristic properties of the blend films were investigated by using X-ray diffraction and scanning electron microscopy. The sound absorption performance of the compositions (nanofiber membranes and needle punched non-woven fabric) was tested by an impedance tube. The sound absorption performance of non-woven fabric has greatly improved after combining with thin nanofiber membranes. With addition of graphene oxide, the fibers were intertwined in a loop and form a network, the areal density and surface roughness of the nanofiber membrane are reduced. Composites containing polyvinyl alcohol/polyethylene oxide nanofiber membranes and composites containing polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes exhibited different sound absorption properties in different frequency bands. When the fiber coefficient of variation was small, the average sound absorption coefficient of the composite material was high. However, composites containing both polyvinyl alcohol/polyethylene oxide and polyvinyl alcohol/polyethylene oxide/graphene oxide nanofiber membranes had similar sound absorption properties, and the average sound absorption coefficient was greater than that of polyvinyl alcohol/polyethylene oxide composites.


2019 ◽  
Vol 156 ◽  
pp. 40-45 ◽  
Author(s):  
Carolina Simón-Herrero ◽  
Nieves Peco ◽  
Amaya Romero ◽  
José L. Valverde ◽  
Luz Sánchez-Silva

ACS Omega ◽  
2021 ◽  
Author(s):  
Chao He ◽  
Bin Du ◽  
Juan Ma ◽  
Hao Xiong ◽  
Junjie Qian ◽  
...  

2021 ◽  
Vol 13 (2) ◽  
pp. 637
Author(s):  
Tomas Astrauskas ◽  
Tomas Januševičius ◽  
Raimondas Grubliauskas

Studies on recycled materials emerged during recent years. This paper investigates samples’ sound absorption properties for panels fabricated of a mixture of paper sludge (PS) and clay mixture. PS was the core material. The sound absorption was measured. We also consider the influence of an air gap between panels and rigid backing. Different air gaps (50, 100, 150, 200 mm) simulate existing acoustic panel systems. Finally, the PS and clay composite panel sound absorption coefficients are compared to those for a typical commercial absorptive ceiling panel. The average sound absorption coefficient of PS-clay composite panels (αavg. in the frequency range from 250 to 1600 Hz) was up to 0.55. The resulting average sound absorption coefficient of panels made of recycled (but unfinished) materials is even somewhat higher than for the finished commercial (finished) acoustic panel (αavg. = 0.51).


2021 ◽  
Vol 138 (21) ◽  
pp. 50501
Author(s):  
Fenglong Lin ◽  
Yuejun Liu ◽  
Lijun Song ◽  
Xihai Hao ◽  
Xiaochao Liu ◽  
...  

2021 ◽  
Vol 283 ◽  
pp. 122654
Author(s):  
Mohd Zul Hanif Mahmud ◽  
Norhidayah Abdul Hassan ◽  
Mohd Rosli Hainin ◽  
Che Ros Ismail ◽  
Ramadhansyah Putra Jaya ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document