The relationship between resonance frequency analysis (RFA) and lateral displacement of dental implants: an in vitro study

2012 ◽  
Vol 40 (3) ◽  
pp. 221-227 ◽  
Author(s):  
L. Pagliani ◽  
L. Sennerby ◽  
A. Petersson ◽  
D. Verrocchi ◽  
S. Volpe ◽  
...  
Keyword(s):  
Resonance Frequency ◽  
Dental Implants ◽  
Frequency Analysis ◽  
Lateral Displacement ◽  
In Vitro Study ◽  
Vitro Study ◽  
Resonance Frequency Analysis ◽  
The Relationship

Comparison of reliability of three resonance frequency analysis devices: An in vitro study

2021 ◽  
Author(s):  
Burcu Diker ◽  
Nurettin Diker ◽  
Onjen Tak
Keyword(s):  
Bone Density ◽  
Resonance Frequency ◽  
Frequency Analysis ◽  
In Vitro Study ◽  
Primary Stability ◽  
Resonance Frequency Analysis ◽  
Observer Reliability ◽  
Type 3

The purpose of the present study was to investigate the intra-observer and inter-observer reliability of three resonance frequency analysis (RFA) devices and to compare the implant stability quotient (ISQ) values according to implant macro design and diameter in two different bone densities. A total of 64 implants (Neoss Proactive) of varying diameters (3.5 and 4.0 mm) and implant macro design (tapered and straight) were placed in two artificial bone blocks (the density of type 2 and 3). The implant primary stability was measured using Osstell IDx, Osstell Beacon and Penguin RFA. The ISQ value of each implant was measured by two observers and recorded five times in two directions. The intra-observer and inter-observer reliability of RFA devices were evaluated. In addition to that, mean ISQ values were calculated for each RFA device to evaluate the effect of implant diameter, implant macro design, and bone density on ISQ values. ISQ values were significantly higher for implants placed within the type 2 bone than for the type 3 bone. The 4.0 mm diameter implants presented higher ISQ values than 3.5 mm diameter implants. The intra-class correlation coefficient (ICC) values for intra-observer reliability were above 0.85 for each observer and the ICC values for inter-observer reliability were 0.94, 0.93, 0.98 for Osstell IDx, Osstell Beacon and Penguin RFA, respectively. Although there was excellent inter-observer reliability with three RFA devices, the intra-observer reliability of Osstell Beacon and Penguin RFA were slightly better than Osstell IDx. Bone density and implant diameter were parameters affecting the primary stability of implants.

Comparison of Measurements of Implant Stability by Two Different Radio Frequency Analysis Systems: An In Vitro Study

2020 ◽  
Vol 11 (2) ◽  
pp. 202-207
Author(s):  
Cenker Zeki Koyuncuoglu ◽  
Becen Demir
Keyword(s):  
Radio Frequency ◽  
Frequency Analysis ◽  
Intraclass Correlation ◽  
In Vitro Study ◽  
Vitro Study ◽  
Bovine Bone ◽  
Implant Stability ◽  
Bone Level ◽  
The Relationship

Aim: To compare and evaluate the implant stability quotient (ISQ) measurements by two different radio frequency analysis (RFA) machines, Osstell Mentor and PenguinRFA. Materials and Methods: Twenty bone-level implants (3.7 × 10 mm2) were placed on a bovine bone in this in vitro study. The ISQ measurements were performed with the PenguinRFA and Osstell Mentor machines using the multipeg of the Penguin system. The measurements were repeated three times for each direction and an average ISQ value was calculated. The results were averaged (mean ± SD) and the intraclass correlation coefficient (ICC) was calculated to assess the relationship between the measurements. Result: The mean ISQ values for the Osstell and Penguin machines were 77.60 + 2.11 and 78.05 + 2.04, respectively. The ICC was 0.958. The ISQ values obtained from the Osstell and Penguin machines were significantly compatible ( P < .05). Conclusion: Both of the RFA devices provided similar and reliable ISQ measurements.

Influence of Bone Quality, Drilling Protocol, Implant Diameter/Length on Primary Stability: An In Vitro Comparative Study on Insertion Torque and Resonance Frequency Analysis

2020 ◽  
Vol 46 (3) ◽  
pp. 182-189 ◽  
Author(s):  
Davide Farronato ◽  
Mattia Manfredini ◽  
Michele Stocchero ◽  
Mattia Caccia ◽  
Lorenzo Azzi ◽  
...  
Keyword(s):  
Resonance Frequency ◽  
Bone Quality ◽  
Frequency Analysis ◽  
Primary Stability ◽  
Mean Difference ◽  
Insertion Torque ◽  
Resonance Frequency Analysis ◽  
Bone Response ◽  
Implant Length

The aim of this study was to evaluate the influence of bone quality, drilling technique, implant diameter, and implant length on insertion torque (IT) and resonance frequency analysis (RFA) of a prototype-tapered implant with knife-edge threads. The investigators hypothesized that IT would be affected by variations in bone quality and drilling protocol, whereas RFA would be less influenced by such variables. The investigators implemented an in vitro experiment in which a prototype implant was inserted with different testing conditions into rigid polyurethane foam blocks. The independent variables were: bone quality, drilling protocol, implant diameter, and implant length. Group A implants were inserted with a conventional drilling protocol, whereas Group B implants were inserted with an undersized drilling protocol. Values of IT and RFA were measured at implant installation. IT and RFA values were significantly correlated (Pearson correlation coefficient: 0.54). A multivariable analysis showed a strong model. Higher IT values were associated with drilling protocol B vs A (mean difference: 71.7 Ncm), implant length (3.6 Ncm increase per mm in length), and substrate density (0.199 Ncm increase per mg/cm3 in density). Higher RFA values were associated with drilling protocol B vs A (mean difference: 3.9), implant length (1.0 increase per mm in length), and substrate density (0.032 increase per mg/cm3 in density). Implant diameter was not associated with RFA or IT. Within the limitations of an in vitro study, the results of this study suggest that the studied implant can achieve good level of primary stability in terms of IT and RFA. A strong correlation was found between values of IT and RFA. Both parameters are influenced by the drilling protocol, implant length, and substrate density. Further studies are required to investigate the clinical response in primary stability and marginal bone response.

Sign in / Sign up

Export Citation Format

Share Document