AERODYNAMICS AND HEAT TRANSFER INSIDE A GAS TURBINE MID-PASSAGE GAP

2021 ◽  
pp. 1-13
Author(s):  
Faisal Shaikh ◽  
Budimir Rosic
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Film Cooling ◽  
Heat Load ◽  
Turbine Blades ◽  
Turbine Stage ◽  
Gas Turbine Blades ◽  
Cooling Flows ◽  
Turbine Efficiency ◽  
Gap Flow

Abstract Gas turbine blades and vanes are typically manufactured with small clearances between adjacent vane and blade platforms, termed the midpassage gap. The midpassage gap reduces turbine efficiency and causes additional heat load into the vane platform, as well as changing the distribution of endwall heat transfer and film cooling. This paper presents a low-order analytical analysis to quantify the effects of the midpassage gap on aerodynamics and heat transfer, verified against an experimental campaign and CFD. Using this model, the effects of the gap can be quantified, for a generic turbine stage, based only on geometric features and the passage static pressure field. It is found that at present there are significant losses and a large proportion of heat load caused by the gap, but that with modified design this could be reduced to negligible levels. Cooling flows into the gap to prevent ingression are investigated analytically and with CFD. Recommendations are given for targets that turbine designers should work toward in reducing the adverse effects of the midpassage gap. A method to estimate the effect of gap flow is presented, so that for any machine the significance of the gap may be assessed.

Aerodynamics and Heat Transfer Inside a Gas Turbine Mid-Passage Gap

2020 ◽  
Author(s):  
Faisal Shaikh ◽  
Budimir Rosic
Keyword(s):  
Heat Transfer ◽  
Gas Turbine ◽  
Film Cooling ◽  
Heat Load ◽  
Turbine Blades ◽  
Turbine Stage ◽  
Gas Turbine Blades ◽  
Cooling Flows ◽  
Turbine Efficiency ◽  
Gap Flow

Abstract Gas turbine blades and vanes are typically manufactured with small clearances between adjacent vane and blade platforms, termed the midpassage gap. The midpassage gap reduces turbine efficiency and causes additional heat load into the vane platform, as well as changing the distribution of endwall heat transfer and film cooling. This paper presents a low-order analytical analysis to quantify the effects of the midpassage gap on aerodynamics and heat transfer, verified against an experimental campaign and CFD. Using this model, the effects of the gap can be quantified, for a generic turbine stage, based only on geometric features and the passage static pressure field. It is found that at present there are significant losses and a large proportion of heat load caused by the gap, but that with modified design this could be reduced to negligible levels. Cooling flows into the gap to prevent ingression are investigated analytically and with CFD. Recommendations are given for targets that turbine designers should work toward in reducing the adverse effects of the midpassage gap. A method to estimate the effect of gap flow is presented, so that for any machine the significance of the gap may be assessed.

High-Pressure Gas Turbine Vane Turbulent Flows and Heat Transfer Predicted by RANS/LES/DES

2017 ◽  
Author(s):  
Ping Dong ◽  
R. S. Amano
Keyword(s):  
Heat Transfer ◽  
High Pressure ◽  
Gas Turbine ◽  
Turbulent Flows ◽  
Film Cooling ◽  
Turbine Blades ◽  
Suction Side ◽  
Gas Turbine Blades ◽  
Flow And Heat Transfer ◽  
Turbine Vane

The lifetime of the modern gas turbines greatly depends on the durability of hot section components operating at high temperatures. Film cooling is key to air cooling technologies in modern gas turbine and widely used in high-temperature and high-pressure blades as an active cooling scheme. The requirements of accurate prediction of aerodynamic flow and heat transfer in gas turbine blades lay the essential foundation of cooling effectiveness improvement and working life estimation. In recent days, Large Eddy Simulations (LES) is considered as a useful tool to predict turbulent flows and heat transfer around gas turbine blades, but, comparing to the Reynolds-Averaged Navier–Stokes (RANS) methods, the LES method usually needs more computing resource and depends on computational power and mesh quality. In this paper, LES/DES (Detached Eddy Simulation) predictions were compared to RANS prediction with interest in the accuracy and improvement of turbulent flow and heat transfer phenomena around NASA’s C3X high-pressure gas turbine vane with leading edge cooling film. RANS/LES/DES were detailed and further investigated to assess their ability to predict flow and heat transfer in boundary layer around C3X vane. The current predictions showed that the mix between film cooling injections and free stream resulted in complex flow and heat transfer in the boundary layer on the external vane surface. The predictions of the aerodynamic load along the C3X vane with RANS/LES/DES were almost identical and agreed well with the experimental results. However, the heat transfer predictions with RANS/LES/DES were different. The transition prediction showed the best agreement with the experiment data in the most region. The LES prediction only partially agreed with the experimental data before separation point on the suction side and mild pressure gradient region on the pressure side. The DES and RANS predictions agreed with the experiment data after separation point on the suction side and most region on the pressure side.

Experimental Study of Heat Transfer in Gas Turbine Blades Using a Transient Inverse Technique

2009 ◽  
Vol 30 (13) ◽  
pp. 1077-1086 ◽  
Author(s):  
Peter Heidrich ◽  
Jens V. Wolfersdorf ◽  
Martin Schnieder
Keyword(s):  
Heat Transfer ◽  
Experimental Study ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Inverse Technique ◽  
Gas Turbine Blades

Laminar and Transitional Boundary Layer Structures in Accelerating Flow With Heat Transfer

1986 ◽  
Vol 108 (1) ◽  
pp. 116-123 ◽  
Author(s):  
K. Rued ◽  
S. Wittig
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Gas Turbine ◽  
Turbine Blades ◽  
Pressure Gradients ◽  
Transfer Coefficients ◽  
Gas Turbine Blades ◽  
Heat Transfer Coefficients ◽  
Layer Structures ◽  
Flow Heat

The accurate prediction of heat transfer coefficients on cooled gas turbine blades requires consideration of various influence parameters. The present study continues previous work with special efforts to determine the separate effects of each of several parameters important in turbine flow. Heat transfer and boundary layer measurements were performed along a cooled flat plate with various freestream turbulence levels (Tu = 1.6−11 percent), pressure gradients (k = 0−6 × 10−6), and cooling intensities (Tw/T∞ = 1.0−0.53). Whereas the majority of previously available results were obtained from adiabatic or only slightly heated surfaces, the present study is directed mainly toward application on highly cooled surfaces as found in gas turbine engines.

Film Cooling of Gas Turbine Blades: A Study of the Effect of Large Temperature Differences on Film Cooling Effectiveness

1977 ◽  
Vol 99 (1) ◽  
pp. 11-20 ◽  
Author(s):  
M. A. Paradis
Keyword(s):  
Gas Turbine ◽  
Film Cooling ◽  
Turbine Blades ◽  
Large Temperature ◽  
Constant Property ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Gas Turbine Blades ◽  
Combustion Gases ◽  
Simple Equations

Experiments have been performed on the film cooling of gas turbine blades in order to study the influence of large temperature differences on the effectiveness of film cooling. A two-dimensional flat plate model was tested in a stream of 1000 K combustion gases flowing at between 110 and 170 m/s. The model was cooled on both sides by jets of air coming from flush angled slots. The range of velocity ratios Uc/Ug covered was from 0.3 to 1.7 and the range of blowing rates was between 0.5 and 5. Film cooling effectiveness was measured and boundary layer traverses were performed. It has been found that once radiation and conduction effects are taken into account, the simple equations proposed by previous workers for the constant property case could be used with little error.

Sign in / Sign up

Export Citation Format

Share Document