6-DOF Numerical Simulation of the Vertical-Axis Water Turbine

2011 ◽  
Author(s):  
Xin Wang ◽  
Xianwu Luo ◽  
Baotang Zhuang ◽  
Weiping Yu ◽  
Hongyuan Xu
Keyword(s):  
Vertical Axis ◽  
Hydrodynamic Performance ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Test Model ◽  
Tip Speed Ratio ◽  
Water Turbine ◽  
Tidal Stream ◽  
Static Head ◽  
Tidal Stream Turbine

Recent years, the vertical-axis water turbine (VAWT) is widely used for converting the kinetic energy of the moving water in open flow and with low static head like river and tidal sites. Conventional numerical methods such as disk-stream tube method and vortex panel method have some drawbacks to predict the behaviors and characteristics of the vertical-axis tidal stream turbine. This paper had treated the hydrodynamic performance of a VAWT model experimentally and numerically. Based on the present research, a 6-DOF method coupled with CFD suitable to simulate the rotor movement and predict the hydraulic performance for a VAWT was proposed. Compared with the experiments, the numerical results for the performance of the VAWT model were reasonable. It is also noted that there is a maximum power coefficient near tip speed ratio of 2.5 for the test model.

Numerical Predictions and Experimental Verifications for Hydrodynamic Performance of Tidal Stream Turbine

2013 ◽  
Vol 694-697 ◽  
pp. 630-634 ◽  
Author(s):  
Bin Guo ◽  
Da Zheng Wang ◽  
Jun Wei Zhou
Keyword(s):  
Water Channel ◽  
Hydrodynamic Performance ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Circulating Water ◽  
Numerical Predictions ◽  
Ansys Cfx ◽  
Tidal Stream ◽  
Tidal Stream Turbine

Blade element momentum (BEM) theory is used to design the tidal stream turbine in this paper. ANSYS-CFX and numeca are used to predict the hydrodynamic performance of the turbine. The power coefficient of the turbine obtained by CFD is 39.36% at the design tip speed ratio. A 300mm diameter scale turbine has been built, and the tests were carried out in the circulating water channel, the power coefficient can reach 40.5% at the design tip speed ratio. Through the comparisons between experimental results and CFD results, it proves the application of the numerical method for blade design, and the distributions of the pressure and axial velocity near the blade are analyzed at the end of the paper.

Numerical Predictions and Verifications for Hydrodynamic Performance of Bidirectional Tidal Stream Turbine

2012 ◽  
Vol 229-231 ◽  
pp. 2478-2480
Author(s):  
Bin Guo ◽  
Da Zheng Wang ◽  
Jun Wei Zhou
Keyword(s):  
Hydrodynamic Performance ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Numerical Predictions ◽  
Ansys Cfx ◽  
Tidal Stream ◽  
Cfd Method ◽  
Tidal Stream Turbine ◽  
Bem Theory ◽  
Blade Element

In this paper, the tidal stream turbine blade is designed by using blade element momentum (BEM) theory. The bidirectional airfoil is created derived from NACA airfoil. Ansys-CFX is used to predict the hydrodynamic performance of this bidirectional airfoil, and it turns out that the bidirectional airfoil works well at both of the tidal current directions. A test turbine named rotor 2 is used, and a comparison is made between experimental results of the test turbine and numerical prediction results to prove the correctness of the numerical method. The power coefficient of bidirectional tidal stream turbine obtained by CFD method is 39.36% at the design tip speed ratio.

scholarly journals Study on Hydrodynamic Configuration Parameters of Vertical-Axis Tidal Turbine

2020 ◽  
Vol 27 (1) ◽  
pp. 116-125
Author(s):  
Li Guangnian ◽  
Qingren Chen ◽  
Yue Liu ◽  
Shanqiang Zhu ◽  
Qun Yu
Keyword(s):  
Vertical Axis ◽  
Hydrodynamic Performance ◽  
Numerical Code ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Variation Principle ◽  
Tip Speed Ratio ◽  
Tidal Turbines ◽  
Tidal Turbine ◽  
Vertical Axis Tidal Turbine

AbstractIn this paper, a numerical code for predicting the hydrodynamic performance of vertical-axis tidal turbine array is developed. The effect of the tip speed ratio, solidity, and preset angle on the hydrodynamic performance are discussed using a series of calculations. The load principle of the rotor and the variation principle of the turbine power coefficient are studied. All these results can be considered as a reference for the design of vertical-axis tidal turbines.

Numerical Research on the Characteristics of Lift-Drag Type Vertical Axis Wind Turbine

2012 ◽  
Vol 189 ◽  
pp. 448-452
Author(s):  
Yan Jun Chen ◽  
Guo Qing Wu ◽  
Yang Cao ◽  
Dian Gui Huang ◽  
Qin Wang ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Vertical Axis ◽  
Chord Length ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Middle Range ◽  
Parabolic Form ◽  
Cfd Method

Numerical studies are conducted to research the performance of a kind of lift-drag type vertical axis wind turbine (VAWT) affected by solidity with the CFD method. Moving mesh technique is used to construct the model. The Spalart-Allmaras one equation turbulent model and the implicit coupled algorithm based on pressure are selected to solve the transient equations. In this research, how the tip speed ratio and the solidity of blade affect the power coefficient (Cp) of the small H-VAWT is analyzed. The results indicate that Cp curves exhibit approximate parabolic form with its maximum in the middle range of tip speed ratio. The two-blade wind turbine has the lowest Cp while the three-blade one is more powerful and the four-blade one brings the highest power. With the certain number of blades, there is a best chord length, and too long or too short chord length may reduce the Cp.

Starting System for Darrieus Water Turbine of Tidal Stream Electricity Generation

2016 ◽  
Author(s):  
Seiji Shimizu ◽  
Masayuki Fujii ◽  
Tetsuya Sumida ◽  
Kenji Sasa ◽  
Yasuhiro Kimura ◽  
...  
Keyword(s):  
Experimental Data ◽  
Cross Section ◽  
Electricity Generation ◽  
Lift Coefficient ◽  
Vertical Axis ◽  
Cylindrical Shape ◽  
Water Turbine ◽  
Tidal Stream ◽  
Tidal Stream Turbine ◽  
Original Experimental Data

Darrieus type vertical axis water turbine in a cylindrical shape which consists of some straight blades is simple, efficient and easy to install a generator upward. However, it has difficulty in starting revolution. As a method to cope with such a problem, a starting revolution assist mechanism was fabricated and set on a prototype of the turbine. Assist experiment was carried out. It resulted helping well the starting revolution. The improved prototype of tidal stream turbine can generate 1.4 W under a water flow of 1 m/s where impossible to self-start. Besides that, Darrieus water turbine’s generating torque property was investigated by the famous original experimental data of lift coefficient Cl and drag coefficient Cd for straight blades of NACA63 3-018 cross section. It was found that setting two or four blades in a turbine would help to improve the difficulty of starting revolution.

Numerical Modeling of Vertical Axis Wind Turbines

2014 ◽  
Author(s):  
Teresa Parra-Santos ◽  
Armando Gallegos-Muñoz ◽  
Miguel A. Rodriguez-Beneite ◽  
Cristobal Uzarraga-Rodriguez ◽  
Francisco Castro-Ruiz
Keyword(s):  
Mechanical Energy ◽  
Vertical Axis ◽  
The Self ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Vertical Axis Wind Turbines ◽  
Selection Of ◽  
Rotor Axis

This paper aims to predict the performance of Vertical Axis Wind Turbine (VAWT), hence the modeling of kinetic energy extraction from wind and its conversion to mechanical energy at the rotor axis, is carried out. The H-type Darrieus turbine consists of three straight blades with shape of aerofoil attached to a rotating vertical shaft. The criterion on the selection of this kind of turbines, despite its reduced efficiency, is the easy manufacture in workshops. A parametric study has been carried out to analyze the camber effect on the non dimensional curves of power coefficient so that the self starting features as well as the range of tip speed ratio of operation could be predicted.

scholarly journals Studi simulasi penggunaan airfoil naca 6412 sebagai sudu pada turbin angin crossflow melalui pemodelan CFD 2 dimensi

2018 ◽  
Vol 13 (1) ◽  
pp. 28
Author(s):  
Muhammad Ivan Fadhil Hendrawan ◽  
Dominicus Danardono ◽  
Syamsul Hadi
Keyword(s):  
Wind Turbine ◽  
Constant Velocity ◽  
Cross Flow ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Ansys Fluent ◽  
Tip Speed Ratio ◽  
Blade Number

AbstractThe simulation aimed to understand the effect of the angle of blade number and blade number of vertical axis wind turbine with cross flow runner to enhance the performance of wind turbine. The turbine had 20, 22, and 24 number of blades. Simulation was done in 2D analysis using ANSYS-Fluent. Tip speed ratio was varied in range of 0,1-0,5 with constant velocity inlet 2 m/s. The effect of blade numbers to torque and power coefficient were analyzed and compared. It had been found that the best power coefficient were 0,5 at tip speed ratio 0,3.

scholarly journals Studi Eksperimen Pengaruh Jumlah Sudu Terhadap Kinerja Wind Turbine Crossflow

2021 ◽  
Vol 16 (2) ◽  
pp. 218
Author(s):  
Fahrudin Fahrudin ◽  
Fitri Wahyuni ◽  
Dini Oktavitasari
Keyword(s):  
Wind Turbine ◽  
Alternative Energy ◽  
Wind Tunnel Test ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Test Scheme ◽  
Vertical Axis Wind Turbine ◽  
Tip Speed Ratio ◽  
Torque Coefficient

<p>Wind is an alternative energy that is environmentally friendly and sustainable. Therefore, we need a type of wind turbine that can receive wind from all directions. The crossflow type vertical axis wind turbine has a high torque coefficient at a low tip speed ratio. The purpose of this study was to determine the effect of the number of blades on the performance of the vertical axis crossflow wind turbine. The experimental test was carried out by varying the number of blades. The configuration is analyzed using the experimental wind tunnel test scheme which has been modified in the section test section. The results showed that the number of blades 16 has a power coefficient ( ) = 0.23 tip speed ratio (TSR) = 0.42 at a wind speed of 4 m / s.</p><p><strong><br /></strong></p>

scholarly journals A COMPARETIVE ANALYSIS OF AERODYNAMIC CHARECTERISTICS OF A VERTICAL AXIS VANE TYPE WIND TURBINE OVER EVEN AND ODD NUMBER OF BLADES

2015 ◽  
Vol 45 (1) ◽  
pp. 14-18
Author(s):  
Zulfa Ferdous ◽  
Md. Quamrul Islam ◽  
M Ali
Keyword(s):  
Reynolds Number ◽  
Dynamic Condition ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Tip Speed Ratio ◽  
Subsonic Wind Tunnel ◽  
Aerodynamic Properties ◽  
Wide Range ◽  
Set Up

This paper reports on the experimental investigation of the aerodynamic effects on even and odd number bladed vertical axis vane type rotor. The experiment was conducted with the help of a subsonic wind tunnel together with the experimental set-up of the vane type rotor and a spring balance. To ensure a Reynolds number independent approach, different stream flow was maintained. The flow velocities varied from 5 m/s to 9 m/s covering the Reynolds number from 0.6375 X 10^5 to 1.2 X 10^5. A four, five and six bladed vertical axis vane typerotor was used to determine the aerodynamic properties in dynamic condition. It is found that the power coefficient increases with increasing the number of blade but the significant effect of even and odd number blade is observed on the range of tip speed ratio. An odd number bladed rotor covered a wide range of tip speed ratio compare to the even number one.

scholarly journals Dynamic Stall of a Vertical-Axis Wind Turbine and Its Control Using Plasma Actuation

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3738 ◽  
Author(s):  
Lu Ma ◽  
Xiaodong Wang ◽  
Jian Zhu ◽  
Shun Kang
Keyword(s):  
Wind Turbine ◽  
Tangential Force ◽  
Vertical Axis ◽  
Dynamic Stall ◽  
Power Coefficient ◽  
Speed Ratio ◽  
Vertical Axis Wind Turbine ◽  
Dbd Plasma ◽  
Tip Speed Ratio ◽  
Plasma Actuation

In this paper, a dynamic stall control scheme for vertical-axis wind turbine (VAWT) based on pulsed dielectric-barrier-discharge (DBD) plasma actuation is proposed using computational fluid dynamics (CFD). The trend of the wind turbine power coefficient with the tip speed ratio is verified, and the numerical simulation can describe the typical dynamic stall process of the H-type VAWT. The tangential force coefficient and vorticity contours of the blade are compared, and the regular pattern of the VAWT dynamic stall under different tip speed ratios is obtained. Based on the understanding the dynamic stall phenomenon in flow field, the effect of the azimuth of the plasma actuation on the VAWT power is studied. The results show that the azimuth interval of the dynamic stall is approximately 60° or 80° by the different tip speed ratio. The pulsed plasma actuation can suppress dynamic stall. The actuation is optimally applied for the azimuthal position of 60° to 120°.

Sign in / Sign up

Export Citation Format

Share Document