High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads: Part II

2018 ◽  
Author(s):  
Geovana Drumond ◽  
Bianca Pinheiro ◽  
Ilson Pasqualino ◽  
Francine Roudet ◽  
Didier Chicot
Keyword(s):  
Fatigue Life ◽  
Fatigue Damage ◽  
High Cycle Fatigue ◽  
Steel Structures ◽  
New Method ◽  
Microplastic Deformation ◽  
Surface Phenomenon ◽  
Cyclic Loads ◽  
Cycle Fatigue ◽  
Indentation Tests

The hardness of a material shows its ability to resist to microplastic deformation caused by indentation or penetration and is closely related to the plastic slip capacity of the material. Therefore, it could be significant to study the resistance to microplastic deformations based on microhardness changes on the surface, and the associated accumulation of fatigue damage. The present work is part of a research study being carried out with the aim of proposing a new method based on microstructural changes, represented by a fatigue damage indicator, to predict fatigue life of steel structures submitted to cyclic loads, before macroscopic cracking. Here, Berkovich indentation tests were carried out in the samples previously submitted to high cycle fatigue (HCF) tests. It was observed that the major changes in the microhardness values occurred at the surface of the material below 3 μm of indentation depth, and around 20% of the fatigue life of the material, proving that microcracking is a surface phenomenon. So, the results obtained for the surface of the specimen and at the beginning of the fatigue life of the material will be considered in the proposal of a new method to estimate the fatigue life of metal structures.

Analysis on High Cycle Fatigue Properties and Fatigue Damage Evolution of TC25 Titanium Alloy

2016 ◽  
Vol 697 ◽  
pp. 658-663
Author(s):  
Rong Guo Zhao ◽  
Ya Feng Liu ◽  
Yong Zhou Jiang ◽  
Xi Yan Luo ◽  
Qi Bang Li ◽  
...  
Keyword(s):  
Titanium Alloy ◽  
Fatigue Life ◽  
Strain Hardening ◽  
Fatigue Damage ◽  
Damage Evolution ◽  
High Cycle Fatigue ◽  
Damage Model ◽  
Fatigue Properties ◽  
Test Machine ◽  
Cycle Fatigue

The high cycle fatigue tests for smooth specimens of TC25 titanium alloy under different stress ratios are carried out on a MTS 809 Material Test Machine at a given maximum stress level of 917MPa at ambient temperature, the high cycle fatigue lifetimes for such alloy are measured, and the effects of stress amplitude and mean stress on high cycle fatigue life are analyzed. The initial resistance is measured at the two ends of smooth specimen of TC25 titanium alloy, every a certain cycles, the fatigue test is interrupted, and the current resistance values at various fatigue cycles are measured. The ratio of resistance change is adopted to characterize the fatigue damage evolution in TC25 titanium alloy, and a modified Chaboche damage model is applied to derive the fatigue damage evolution equation. The results show that the theoretical calculated values agree well with the test data, which indicates that the modified Chaboche damage model can precisely describe the accumulated damage in TC25 titanium alloy at high cycle fatigue under unaxial loading. Finally, the high cycle fatigue lifetimes for TC25 titanium alloy specimens at different strain hardening rates are tested at a given stress ratio of 0.1, the effect of strain hardening on fatigue life is investigated based on a microstructure analysis on TC25 titanium alloy, and an expression between fatigue life and strain hardening rate is derived

A Damage Criterion to Predict the Fatigue Life of Steel Pipelines Based on Indentation Measurements

2020 ◽  
Vol 143 (1) ◽  
Author(s):  
Geovana Drumond ◽  
Francine Roudet ◽  
Didier Chicot ◽  
Bianca Pinheiro ◽  
Ilson Pasqualino
Keyword(s):  
Fatigue Life ◽  
Fatigue Damage ◽  
Steel Structure ◽  
Steel Structures ◽  
Initial State ◽  
Damage Criterion ◽  
Microstructural Changes ◽  
Pertinent Data ◽  
Indentation Tests ◽  
Number Of Cycles

Abstract A study was conducted to investigate the effects of surface microhardness on different phases of fatigue damage. This helps to estimate the evolution of the material resistance from microplastic distortions and gives pertinent data about cumulated fatigue damage. The objective of this work is to propose a damage criterion, associated with microstructural changes, to predict the fatigue life of steel structures submitted to cyclic loads before macroscopic cracking. Instrumented indentation tests (IIT) were conducted on test samples submitted to high cycle fatigue (HCF) loads. To evaluate the role of the microstructure initial state, the material was considered in two different conditions: as-received and annealed. It was observed that significant changes in the microhardness values happened at the surface and subsurface of the material, up to 2 µm of indentation depth, and around 21% and 7% of the fatigue life for as-received and annealed conditions, respectively. These percentages were identified as a critical period for microstructural changes, which was taken as a reference in a damage criterion to predict the number of cycles to fatigue failure (Nf) of a steel structure.

scholarly journals High Cycle Fatigue Damage Evaluation of Steel Pipelines Based on Microhardness Changes During Cyclic Loads

2017 ◽  
Author(s):  
Geovana Drumond ◽  
Bianca Pinheiro ◽  
Ilson Pasqualino ◽  
Francine Roudet ◽  
Didier Chicot ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Fatigue Damage ◽  
Steel Structures ◽  
Material Surface ◽  
Cyclic Loads ◽  
X Ray Diffraction ◽  
Microstructural Changes ◽  
X Ray ◽  
Microcrack Initiation ◽  
Non Destructive

Fatigue is a major cause of failures concerning metal structures, being capable of causing catastrophic damage to the environment and considerable financial loss. Steel pipelines used in oil and gas industry for hydrocarbon transportation, for instance, are submitted to the action of cyclic loads, being susceptible to undergo fatigue failures. The phenomenon of metal fatigue is a complex process comprising different successive mechanisms. In general, four stages can be identified, representing microcrack initiation (nucleation), microcracking, macrocrack propagation, and final fracture. Fatigue damage prior to nucleation of microcracks is primarily related to localized plastic strain development at or near material surface during cycling. The microhardness of the material shows its ability to resist microplastic deformation caused by indentation or penetration, and is closely related to the material plastic slip capacity. Therefore, the study of changes in material surface microhardness during the different stages of fatigue process can estimate the evolution of the material resistance to microplastic deformations and, consequently, provide relevant information about the cumulated fatigue damage on the surface. The present work is part of a research study being carried out with the aim of proposing a new method based on microstructural changes, represented by a fatigue damage indicator, to predict fatigue life of steel structures submitted to cyclic loads, before macroscopic cracking. In a previous work, the X-ray diffraction technique was used to evaluate these changes. This technique presents several advantages, since it is non-destructive and concerns the surface and subsurface of the material, where major microstructural changes take place during fatigue. The most important parameter obtained by this technique is the full width at half maximum (FWHM) of the diffraction peak, which can provide information about the dislocation network density and estimate microdeformations. It was found that the evolution of this parameter with cycling presents three different stages, associated to the mechanisms of microcrack initiation, microcracking, macrocrack propagation, respectively. Here, the fatigue damage of pipeline steels is evaluated through microhardness testing. Different stages of changes in microhardness are also found and they are correlated to those observed with the X-ray technique and also with transmission electron microscopic (TEM) images from experimental tests performed with a similar material. This correlation can help to corroborate the X-ray diffraction results previously obtained and recommend then this non-destructive technique as the base of the method for predicting fatigue life of steel structures proposed here.

A Multi-Level Low Cycle Fatigue Damage Model for Forging Die Material

2006 ◽  
Vol 514-516 ◽  
pp. 804-809
Author(s):  
S. Gao ◽  
Ewald Werner
Keyword(s):  
Fatigue Life ◽  
Fatigue Damage ◽  
Low Cycle Fatigue ◽  
Damage Model ◽  
Fatigue Loading ◽  
Cycle Fatigue ◽  
Die Material ◽  
Multi Level ◽  
Loading Sequence ◽  
Forging Die

The forging die material, a high strength steel designated W513 is considered in this paper. A fatigue damage model, based on thermodynamics and continuum damage mechanics, is constructed in which both the previous damage and the loading sequence are considered. The unknown material parameters in the model are identified from low cycle fatigue tests. Damage evolution under multi-level fatigue loading is investigated. The results show that the fatigue life is closely related to the loading sequence. The fatigue life of the materials with low fatigue loading first followed by high fatigue loading is longer than that for the reversed loading sequence.

High-cycle fatigue tests of pretensioned concrete beams

PCI Journal ◽  
2022 ◽  
Vol 67 (1) ◽  
Author(s):  
Jörn Remitz ◽  
Martin Empelmann
Keyword(s):  
Fatigue Life ◽  
High Cycle Fatigue ◽  
Concrete Beams ◽  
Fatigue Behavior ◽  
Fatigue Tests ◽  
Design Methods ◽  
Test Results ◽  
Cycle Fatigue ◽  
Pretensioned Concrete ◽  
Current Design

Pretensioned concrete beams are widely used as bridge girders for simply supported bridges. Understanding the fatigue behavior of such beams is very important for design and construction to prevent fatigue failure. The fatigue behavior of pretensioned concrete beams is mainly influenced by the fatigue of the prestressing strands. The evaluation of previous test results from the literature indicated a reduced fatigue life in the long-life region compared with current design methods and specifications. Therefore, nine additional high-cycle fatigue tests were conducted on pretensioned concrete beams with strand stress ranges of about 100 MPa (14.5 ksi). The test results confirmed that current design methods and specifications overestimate the fatigue life of embedded strands in pretensioned concrete beams.

Sign in / Sign up

Export Citation Format

Share Document