Nickels and tines: the myth of nickel allergy in intracranial stents

2022 ◽  
pp. neurintsurg-2021-018365
Author(s):  
Kevin N Vanent ◽  
Emma M Federico ◽  
David I Bass ◽  
Guilherme Barros ◽  
Jade Keen ◽  
...  

BackgroundMost intracranial stents contain nickel alloy, and nickel allergy or hypersensitivity is common. Neurological injury following endovascular treatment with a nickel containing intracranial stent has been reported in patients with purported nickel allergy, but it is unclear whether these reactions represent true nickel hypersensitivity. We quantified nickel release from commonly used intracranial stents to investigate whether such stents should be avoided in patients with nickel allergy.MethodsWe examined nickel release from seven commonly used intracranial stents: Enterprise, LVIS Jr, Neuroform, Wingspan, Zilver, Pipeline Flex Embolization Device, and Surpass Evolve. We incubated each stent in human plasma-like media for 30 days. Dimethylglyoxime (DMG) spot testing was performed on each stent to detect released nickel at 0 and 30 days. Inductively coupled plasma–optical emission spectroscopy (ICP-OES) was then used to quantify the nickel concentration of the media at 30 days. Nickel currency and nickel standard for atomic absorption spectrometry were used as positive controls.ResultsDMG spot tests indicated nickel release only from nickel currency at 0 and 30 days of incubation. No nickel release was detected from any stent at 30 days using ICP-OES.ConclusionsNickel release from commonly used intracranial stents is negligible. These results suggest that previously reported hypersensitivity to these stents may be misattributed to nickel allergy, and that patients with nickel allergy may be safely treated with select nickel-containing stents.

2017 ◽  
Vol 61 (2) ◽  
pp. 223-232
Author(s):  
Ralitsa Balkanska ◽  
Elisaveta Mladenova ◽  
Irina Karadjova

Abstract The objective of the present study was to investigate selected trace and mineral elements in Royal Jelly (RJ) from Bulgaria. A total of 30 RJ samples were included in the study. The analytical procedure consisted of the microwave digestion of the RJ samples with nitric acid followed by instrumental measurement. Concentrations of Al, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Na, P, Sr and Zn were determined using inductively coupled plasma optical emission spectroscopy (ICP-OES), while As, Cd, Co, Ni and Pb were determined by electrothermal atomic absorption spectrometry (ETAAS). Our results showed that elements K, Mg, Ca represented 96% from the total mineral content of the RJ samples from Bulgaria, while the most abundant trace element was Na, followed by Zn. The elements Ba, Cr, Cu, Fe, Mn and Sr were found in trace concentration levels and elements As, Pb, Cd, Co and Ni in microconcentration levels. Selected mineral and trace elements were found in relatively constant concentration levels in all of the analyzed RJ samples. It was concluded that chemical element content did not depend on geographical origin and was under homeostatic adjustment in RJs.


Materials ◽  
2020 ◽  
Vol 13 (22) ◽  
pp. 5136
Author(s):  
Marin Senila ◽  
Oana Cadar ◽  
Lacrimioara Senila ◽  
Sarah Böringer ◽  
Karine Seaudeau-Pirouley ◽  
...  

Palladium (Pd) and platinum (Pt) are extensively used as catalysts in the petrochemical and automotive industries, and due to high demand for them on the market, their recycling from spent supported catalysts is clearly needed. To assess the content of Pd and Pt in catalysts in order to establish their commercial value or to evaluate the recovery efficiency of technologies used for recycling, reliable analytical methods for determination of these elements are required. Spectrometric methods, such as inductively coupled plasma optical emission spectrometry (ICP-OES) and graphite furnace atomic absorption spectrometry (GFAAS) are powerful tools that can be employed for the determination of Pd and Pt in various sample matrices. However, these methods allow only the injection of liquid samples. In this regard, the digestion of solid sample by microwave-assisted acid extraction procedures at high pressures and temperatures is often used. In this study, a microwave acid digestion method was optimized for the extraction of Pd and Pt from spent catalysts, using a four-step program, at a maximum 200 °C. The resulting solutions were analyzed using ICP-OES, at two different wavelengths for each metal (Pd at 340.458 and 363.470 nm, and Pt at 265.945 and 214.423 nm, respectively) and using GFAAS (Pd at 247.64 nm, Pt at 265.94 nm). Five types of spent catalyst were analyzed and the standard deviations of repeatability for five parallel samples were less than predicted relative standard deviations (PRSD%) calculated using Horvitz’s equation for all the analyzed samples.


Author(s):  
Masoud Aghahoseini ◽  
Gholamhassan Azimi ◽  
M. K. Amini

Determination of traces of Cd, Co, Cu, Mn and Pb elements in zirconium and its alloys by inductively coupled plasma optical emission spectrometry (ICP OES) suffers from severe spectral interferences...


2021 ◽  
Author(s):  
Jenna M. DeSousa ◽  
Micaella Z. Jorge ◽  
Hayley B. Lindsay ◽  
Frederick R. Haselton ◽  
David W. Wright ◽  
...  

This work demonstrates the first use of ICP-OES to quantitatively analyze gold content on lateral flow assays.


Sign in / Sign up

Export Citation Format

Share Document