SOME NOTES ON LOW-DIMENSIONAL ELASTIC THEORIES OF BIO- AND NANO-STRUCTURES

2010 ◽  
Vol 24 (23) ◽  
pp. 2403-2412 ◽  
Author(s):  
XIAO-HUA ZHOU
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Energy Density ◽  
Helix Angle ◽  
Dimensional Structure ◽  
One Dimensional ◽  
Nano Structures ◽  
Multi Walled Carbon Nanotubes ◽  
Low Dimensional ◽  
Walled Carbon Nanotubes

The shapes of DNA, carbon nanotube (CNT) and vesicle are determined by the minimum of their elastic energy. Two central results about the low-dimensional elastic structure are reported here. Firstly, if the energy density of a one-dimensional structure is only related to its curvature, we generally find that a helix solution with the helix angle θ = ±π/4 will have zero total energy. Secondly, with the fixed length and radii, the helical multi-walled carbon nanotubes (MWNTs) and DNA will have the lowest energy when the helix angle θ = ±π/3.

Effect of Expanded Temperature on Microstructure of Carbon Nanotubes/Expanded Graphite Composites

2013 ◽  
Vol 716 ◽  
pp. 373-378
Author(s):  
Qian Zhang ◽  
Xin Bao Gao ◽  
Tian Peng Li
Keyword(s):  
Carbon Nanotubes ◽  
Composite Material ◽  
High Temperature ◽  
Carbon Nanotube ◽  
Physical Adsorption ◽  
Expanded Graphite ◽  
Graphite Flake ◽  
Graphite Composite ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Carbon nanotube/expanded graphite composite material was prepared by expanding the mixture of multi-walled carbon nanotubes and expansible graphite under the condition of high temperature. The microstructure and composition was studied by using SEM and XRD. The study shows that the tubular structure of carbon nanotubes in the composite material is changed by high temperature expanding process, and the microstructure is different with different expanding temperature. When the expanding temperature was 900°C, carbon nanotubes transformed, then attached to the surface of expanded graphite flake, so carbon nanotubes and expanding graphite combined strongly; globular carbon nanotubes attached to the surface of expanded graphite flake at the temperature of 700°C, both were combined much more strongly; carbon nanotubes retained the tube structure at the temperature of 500°C, combination was looser due to the simple physical adsorption. The result shows that the choice of expanding temperature has an important effect on microstructure of carbon nanotube/expanded graphite composite material.

scholarly journals Rutin-Functionalized Multi-Walled Carbon Nanotubes: Molecular Docking, Physicochemistry and Cytotoxicity in Fibroblasts

Toxics ◽  
2021 ◽  
Vol 9 (8) ◽  
pp. 173
Author(s):  
Conrado M. S. Neto ◽  
Felipe C. Lima ◽  
Renata P. Morais ◽  
Lucas R. M. de Andrade ◽  
Renata de Lima ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Molecular Docking ◽  
Thermal Analyses ◽  
Three Dimensional ◽  
Morphological Structure ◽  
Dose Effect ◽  
Dimensional Structure ◽  
3T3 Fibroblasts ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi-Walled Carbon Nanotubes (MWCNT) have been functionalized with rutin through three steps (i. reaction step; ii. purification step; iii. drying step) and their physicochemical properties investigated with respect to morphological structure, thermal analysis, Fourier Transform Infrared Spectroscopy (FTIR), and cytotoxicity. The molecular docking suggested the rutin-functionalized MWCNT occurred by hydrogen bonds, which was confirmed by FTIR assays, corroborating the results obtained by thermal analyses. A tubular shape, arranged in a three-dimensional structure, could be observed. Mild cytotoxicity observed in 3T3 fibroblasts suggested a dose–effect relationship after exposure. These findings suggest the formation of aggregates of filamentous structures on the cells favoring the cell penetration.

The Effect of Nanotube Loading and Dispersion on the Three-Dimensional Nanostructure of Carbon Nanotube-Conducting Polymer Composite Films

2002 ◽  
Vol 739 ◽  
Author(s):  
Mark Hughes ◽  
George Z. Chen ◽  
Milo S. P. Shaffer ◽  
Derek J. Fray ◽  
Alan H. Windle
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Conducting Polymer ◽  
Polymer Composite ◽  
Electrochemical Polymerization ◽  
Composite Films ◽  
Three Dimensional ◽  
Ionic Diffusion ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

ABSTRACTNanoporous composite films of multi-walled carbon nanotubes (MWNTs) and either polypyrrole (PPy) or poly(3-methylthiophene) (P3MeT) were grown using an electrochemical polymerization technique in which the nanotubes and conducting polymer were deposited simultaneously. The concentration and dispersion of MWNTs in the polymerization electrolyte was found to have a significant effect on the thickness of polymer coated on each MWNT and hence the loading of MWNTs in the films produced. It has been shown that for an increasing concentration of MWNTs in the polymerization electrolyte, the thickness of polymer coated on each MWNT decreases. This relationship made it possible to minimize ionic diffusion distances within the nanoporous MWNT-PPy films produced, reducing their electrical and ionic resistance and increasing their capacitance relative to similarly prepared pure PPy films.

The influence of functionalization time of carbon nanotube on the mechanical properties of the epoxy composites

2017 ◽  
Vol 51 (12) ◽  
pp. 1693-1701 ◽  
Author(s):  
EA Zakharychev ◽  
EN Razov ◽  
Yu D Semchikov ◽  
NS Zakharycheva ◽  
MA Kabina
Keyword(s):  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Tensile Strength ◽  
Elastic Modulus ◽  
Carbon Nanotube ◽  
Composite Materials ◽  
Polymer Composites ◽  
Epoxy Composites ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

This paper investigates the structure, length, and percentage of functional groups of multi-walled carbon nanotubes (CNT) depending on the time taken for functionalization in HNO3 and H2SO4 mixture. The carbon nanotube content and influence of functionalization time on mechanical properties of polymer composite materials based on epoxy matrix are studied. The extreme dependencies of mechanical properties of carbon nanotube functionalization time of polymer composites were established. The rise in tensile strength of obtained composites reaches 102% and elastic modulus reaches 227% as compared to that of unfilled polymer. The composites exhibited best mechanical properties by including carbon nanotube with 0.5 h functionalization time.

Pebax-1657 mixed matrix membrane containing surface modified multi-walled carbon nanotubes for gas separation

RSC Advances ◽  
2016 ◽  
Vol 6 (83) ◽  
pp. 79563-79577 ◽  
Author(s):  
S. A. Habibiannejad ◽  
A. Aroujalian ◽  
A. Raisi
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Functional Groups ◽  
Gas Separation ◽  
Mixed Matrix Membrane ◽  
Mixed Matrix ◽  
Multi Walled Carbon Nanotubes ◽  
Surface Modified ◽  
Walled Carbon Nanotubes

In this study different functional groups on the surface of carbon nanotube enhanced the performance of Pebax 1657/MWNTs.

Highly sensitive compression sensors using three-dimensional printed polydimethylsiloxane/carbon nanotube nanocomposites

2019 ◽  
Vol 30 (8) ◽  
pp. 1216-1224 ◽  
Author(s):  
Mohammad Charara ◽  
Mohammad Abshirini ◽  
Mrinal C Saha ◽  
M Cengiz Altan ◽  
Yingtao Liu
Keyword(s):  
Carbon Nanotubes ◽  
Electron Microscope ◽  
Carbon Nanotube ◽  
Scanning Electron Microscope ◽  
Three Dimensional ◽  
Multi Walled Carbon Nanotube ◽  
Highly Sensitive ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This article presents three-dimensional printed and highly sensitive polydimethylsiloxane/multi-walled carbon nanotube sensors for compressive strain and pressure measurements. An electrically conductive polydimethylsiloxane/multi-walled carbon nanotube nanocomposite is developed to three-dimensional print compression sensors in a freestanding and layer-by-layer manner. The dispersion of multi-walled carbon nanotubes in polydimethylsiloxane allows the uncured nanocomposite to stand freely without any support throughout the printing process. The cross section of the compression sensors is examined under scanning electron microscope to identify the microstructure of nanocomposites, revealing good dispersion of multi-walled carbon nanotubes within the polydimethylsiloxane matrix. The sensor’s sensitivity was characterized under cyclic compression loading at various max strains, showing an especially high sensitivity at lower strains. The sensing capability of the three-dimensional printed nanocomposites shows minimum variation at various applied strain rates, indicating its versatile potential in a wide range of applications. Cyclic tests under compressive loading for over 8 h demonstrate that the long-term sensing performance is consistent. Finally, in situ micromechanical compressive tests under scanning electron microscope validated the sensor’s piezoresistive mechanism, showing the rearrangement, reorientation, and bending of the multi-walled carbon nanotubes under compressive loads, were the main reasons that lead to the piezoresistive sensing capabilities in the three-dimensional printed nanocomposites.

Self-assembly fabrication of a graphene/multi-walled carbon nanotube hybrid material for suppressing potential heat radiation and toxic effluent

RSC Advances ◽  
2015 ◽  
Vol 5 (125) ◽  
pp. 103365-103372 ◽  
Author(s):  
Lei Liu ◽  
Dong Wang ◽  
Yuan Hu
Keyword(s):  
Carbon Nanotubes ◽  
Aqueous Solution ◽  
Graphene Oxide ◽  
Carbon Nanotube ◽  
Hybrid Material ◽  
Self Assembly ◽  
Heat Radiation ◽  
Multi Walled Carbon Nanotube ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Negative graphene oxide was combined with positive chitosan-modified multi-walled carbon nanotubes in aqueous solution and then thermally reduced to fabricate a multi-walled carbon nanotube/graphene (MWCNT/G) hybrid material.

Sign in / Sign up

Export Citation Format

Share Document