Sedimentological responses to initial continental collision: Triggering of sand injection and onset of mass movement in a syn-collisional trench basin, Saga, southern Tibet

2021 ◽  
pp. jgs2020-178
Author(s):  
Qun Liu ◽  
Ben Kneller ◽  
Wei An ◽  
Xiumian Hu
Keyword(s):  
Mass Transport ◽  
Late Cretaceous ◽  
Mass Movement ◽  
Continental Collision ◽  
Additional Constraint ◽  
Provenance Study ◽  
Southern Tibet ◽  
Stratigraphic Position ◽  
Sedimentary Succession

A continuous Late Cretaceous-Paleocene sedimentary succession within the India-Asia collision suture zone in Xigaze, Tibet, contains a c. 80 m thick sand injection complex immediately overlain by a c. 60 m thick mass transport deposit (MTD, the first of several) with the first evidence of Asian provenance, and immediately followed by a ∼61 Ma tuff. The youngest in situ strata with unequivocal Indian provenance are probably the source beds of the sand intrusions, separated from the first MTD by c. 50 m of pelagic deposits that potentially represent an interval of several million years; the collision could thus have occurred at any time within this interval. However, the uppermost limit of the sand intrusions closely coinciding with the MTD suggests that they occurred penecontemporaneously, possibly associated with initial continental collision. This may provide additional constraint of initial collision onset at c. 61 Ma. Co-occurrence of MTDs and sand injections are possibly good sedimentary indicators of continental collision onset and characteristic of syn-collisional trench basins. Since neither the youngest Indian nor the oldest Asian provenance sediments are in their original stratigraphic position, this study shows that detailed sedimentological work combined with provenance study can better constrain the timing of continental collision.

The Gedan floristic assemblage from the Late Cretaceous deposits of the Kholchan Formation of the Okhotsk-Chukotka volcanogenic belt

Palaeobotany ◽  
2014 ◽  
Vol 5 ◽  
pp. 73-93 ◽  
Author(s):  
L. B. Golovneva ◽  
S. V. Shczepetov
Keyword(s):  
River Basin ◽  
Late Cretaceous ◽  
Middle Part ◽  
Isotopic Data ◽  
Volcanogenic Belt ◽  
Stratigraphic Position ◽  
Cretaceous Deposits

The Gedan floristic assemblage occurs from upper layers of the Kholchan Formation of the Okchotsk-Chukotka volcanogenic belt (OCVB). The locality is situated at the Gedan River in the middle part of the Arman River basin. The Gedan assemblage is composed of 6 taxa: Cladophlebis sp., Sphenobaiera sp., Ginkgo ex gr. adiantoides (Ung.) Heer, Taxodium amguemensis (Efimova) Golovn., Metasequoia sp., Pagiophyllum sp. The similarity of the Gedan floristic assemblage with the Karamken and the Khirumki floristic assemblages from the Kholchan Formation of the Okhotsk sector of the OCVB allows us to join them in the Kholchan flora. This flora is distinct from more ancient Arman flora, which dated as the Turonian-Coniacian and from younger Ola flora, which dated as the Santonian-early Campanian. The age of the Kholchan flora is estimated as the Coniacian on the basis of stratigraphic position, presence of Podozamites, Metasequoia and Quereuxia and also isotopic data. This flora is equivalent with the Chaun flora of Central Chukotka, with the Aleeki flora from the Villigha and Toomahni Rivers interfluve and with the Ulya flora from the southern part of the Okhotsk-Chukotka volcanogenic belt.

scholarly journals Electrokinetic and in situ spectroscopic investigations of CO electrochemical reduction on copper

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Jing Li ◽  
Xiaoxia Chang ◽  
Haochen Zhang ◽  
Arnav S. Malkani ◽  
Mu-jeng Cheng ◽  
...  
Keyword(s):  
Mass Transport ◽  
Active Sites ◽  
Gas Diffusion ◽  
Reduction Reaction ◽  
Adsorbed Hydrogen ◽  
Diffusion Type ◽  
Proton Coupled Electron Transfer ◽  
Alkaline Electrolytes ◽  
Reaction Orders

AbstractRigorous electrokinetic results are key to understanding the reaction mechanisms in the electrochemical CO reduction reaction (CORR), however, most reported results are compromised by the CO mass transport limitation. In this work, we determined mass transport-free CORR kinetics by employing a gas-diffusion type electrode and identified dependence of catalyst surface speciation on the electrolyte pH using in-situ surface enhanced vibrational spectroscopies. Based on the measured Tafel slopes and reaction orders, we demonstrate that the formation rates of C2+ products are most likely limited by the dimerization of CO adsorbate. CH4 production is limited by the CO hydrogenation step via a proton coupled electron transfer and a chemical hydrogenation step of CO by adsorbed hydrogen atom in weakly (7 < pH < 11) and strongly (pH > 11) alkaline electrolytes, respectively. Further, CH4 and C2+ products are likely formed on distinct types of active sites.

scholarly journals Significant Zr isotope variations in single zircon grains recording magma evolution history

2020 ◽  
Vol 117 (35) ◽  
pp. 21125-21131 ◽  
Author(s):  
Jing-Liang Guo ◽  
Zaicong Wang ◽  
Wen Zhang ◽  
Frédéric Moynier ◽  
Dandan Cui ◽  
...  
Keyword(s):  
Isotopic Fractionation ◽  
Major Type ◽  
Strong Temperature Dependence ◽  
Calc Alkaline ◽  
Southern Tibet ◽  
Rayleigh Distillation ◽  
Single Zircon ◽  
Magmatic History ◽  
Fractionation Factors

Zircons widely occur in magmatic rocks and often display internal zonation finely recording the magmatic history. Here, we presented in situ high-precision (2SD <0.15‰ for δ94Zr) and high–spatial-resolution (20 µm) stable Zr isotope compositions of magmatic zircons in a suite of calc-alkaline plutonic rocks from the juvenile part of the Gangdese arc, southern Tibet. These zircon grains are internally zoned with Zr isotopically light cores and increasingly heavier rims. Our data suggest the preferential incorporation of lighter Zr isotopes in zircon from the melt, which would drive the residual melt to heavier values. The Rayleigh distillation model can well explain the observed internal zoning in single zircon grains, and the best-fit models gave average zircon–melt fractionation factors for each sample ranging from 0.99955 to 0.99988. The average fractionation factors are positively correlated with the median Ti-in-zircon temperatures, indicating a strong temperature dependence of Zr isotopic fractionation. The results demonstrate that in situ Zr isotope analyses would be another powerful contribution to the geochemical toolbox related to zircon. The findings of this study solve the fundamental issue on how zircon fractionates Zr isotopes in calc-alkaline magmas, the major type of magmas that led to forming continental crust over time. The results also show the great potential of stable Zr isotopes in tracing magmatic thermal and chemical evolution and thus possibly continental crustal differentiation.

A review of the tectonics of the northern Middle East region

1984 ◽  
Vol 121 (6) ◽  
pp. 577-587 ◽  
Author(s):  
P. E. R. Lovelock
Keyword(s):  
Late Cretaceous ◽  
Kinematic Model ◽  
Continental Collision ◽  
Dead Sea ◽  
Plate Motion ◽  
Arabian Plate ◽  
Southern Boundary ◽  
The North ◽  
The Dead ◽  
Two Stages

AbstractThe structure of the northern part of the Arabian platform is reviewed in the light of hitherto unpublished exploration data and the presently accepted kinematic model of plate motion in the region. The Palmyra and Sinjar zones share a common history of development involving two stages of rifting, one in the Triassic–Jurassic and the other during late Cretaceous to early Tertiary times. Deformation of the Palmyra zone during the Mio-Pliocene is attributed to north–south compression on the eastern block of the Dead Sea transcurrent system which occurred after continental collision in the north in southeast Turkey. The asymmetry of the Palmyra zone is believed to result from northward underthrusting along the southern boundary facilitated by the presence of shallow Triassic evaporites. An important NW-SE cross-plate shear zone has been identified, which can be traced for 600 km and which controls the course of the River Euphrates over long distances in Syria and Iraq. Transcurrent motion along this zone resulted in the formation of narrow grabens during the late Cretaceous which were compressed during the Mio-Pliocene. To a large extent, present day structures in the region result from compressional reactivation of old lineaments within the Arabian plate by the transcurrent motion of the Dead Sea fault zone and subsequent continental collision.

Correlation of Grassy Lake and Cedar Lake ambers using infrared spectroscopy, stable isotopes, and palaeoentomology

2008 ◽  
Vol 45 (9) ◽  
pp. 1061-1082 ◽  
Author(s):  
Ryan C. McKellar ◽  
Alexander P. Wolfe ◽  
Ralf Tappert ◽  
Karlis Muehlenbachs
Keyword(s):  
Stable Isotopes ◽  
Fourier Transform ◽  
Infrared Spectroscopy ◽  
Late Cretaceous ◽  
Western Canada ◽  
Long Distance ◽  
Geochemical Fingerprinting ◽  
Long Distance Transport ◽  
Distance Transport

The Late Cretaceous Grassy Lake and Cedar Lake amber deposits of western Canada are among North America’s most famous amber-producing localities. Although it has been suggested for over a century that Cedar Lake amber from western Manitoba may be a secondary deposit having originated from strata in Alberta, this hypothesis has not been tested explicitly using geochemical fingerprinting coupled to comparative analyses of arthropod faunal content. Although there are many amber-containing horizons associated with Cretaceous coals throughout Alberta, most are thermally mature and brittle, thus lacking the resilience to survive long distance transport while preserving intact biotic inclusions. One of the few exceptions is the amber found in situ at Grassy Lake. We present a suite of new analyses from these and other Late Cretaceous ambers from western Canada, including stable isotopes (H and C), Fourier transform infrared (FTIR) spectra, and an updated faunal compendium for the Grassy and Cedar lakes arthropod assemblages. When combined with amber’s physical properties and stratigraphic constraints, the results of these analyses confirm that Cedar Lake amber is derived directly from the Grassy Lake amber deposit or an immediate correlative equivalent. This enables the palaeoenvironmental context of Grassy Lake amber to be extended to the Cedar Lake deposit, making possible a more inclusive survey of Cretaceous arthropod faunas.

scholarly journals Coal petrology analysis and implications in depositional environments from upper Cretaceous to Miocene: a study case in the Eastern Cordillera of Colombia

2021 ◽  
Author(s):  
Clara Guatame ◽  
Marco Rincón
Keyword(s):  
Late Cretaceous ◽  
Foreland Basin ◽  
Late Eocene ◽  
Depositional Environments ◽  
Estuarine System ◽  
Eastern Cordillera ◽  
Stratigraphic Position ◽  
San Fernando ◽  
Coal Facies ◽  
Oil Sector

AbstractThe Piedemonte Llanero Basin is located on the eastern side of the Eastern Cordillera of the Colombian Andes. It has been the subject of numerous geological studies carried out for the oil sector, mainly. This study presents the coal-petrographical features of 15 coal seams of four geological formations from Late Cretaceous to Middle Miocene (Chipaque formation, Palmichal group, Arcillas del Limbo formation, and San Fernando formation). Analysis of 33 samples indicates enrichment in vitrinite, while liptinite and inertinite concentrations vary according to the stratigraphic position. Reflectance indicates that the coal range gradually decreases from highly volatile bituminous C (Chipaque formation) to subbituminous C (San Fernando formation). The microlithotypes with the highest concentrations are clarite and vitrinertoliptite. Maceral composition and coal facies indicate changes in the depositional conditions of the sequence. The precursor peat from Late Cretaceous to Late Paleocene accumulated under limnic conditions followed by telmatic in Late Eocene–Early Miocene. The coal facies indices show wet conditions in forest swamps with variations in the flooding surface, influxes of brackish water and good tissue preservation. The tectonic conditions along the Piedemonte Llanero basin is evident, from post-rift to foreland basin, evidenced by oxic and anoxic periods reflected in the maceral composition and its morphology. The coal environment corresponds to an estuarine system started in the Chipaque formation evolving to the lacustrine conditions in the San Fernando formation.

scholarly journals Magmatic flare-up causes crustal thickening at the transition from subduction to continental collision

2021 ◽  
Vol 2 (1) ◽  
Author(s):  
Carlos E. Ganade ◽  
Pierre Lanari ◽  
Daniela Rubatto ◽  
Joerg Hermann ◽  
Roberto F. Weinberg ◽  
...  
Keyword(s):  
Production Rate ◽  
Continental Margin ◽  
Subduction Zones ◽  
Continental Collision ◽  
Crustal Thickening ◽  
Time Intervals ◽  
West Gondwana ◽  
Continental Arc ◽  
Order Of Magnitude

AbstractAbove subduction zones, magma production rate and crustal generation can increase by an order of magnitude during narrow time intervals known as magmatic flare-ups. However, the consequences of these events in the deep arc environment remain poorly understood. Here we use petrological and in-situ zircon dating techniques to investigate the root of a continental arc within the collisional West Gondwana Orogen that is now exposed in the Kabyé Massif, Togo. We show that gabbros intruded 670 million years ago at 20–25 km depth were transformed to eclogites by 620 million years ago at 65–70 km depth. This was coeval with extensive magmatism at 20–40 km depth, indicative of a flare-up event which peaked just prior to the subduction of the continental margin. We propose that increased H2O flux from subduction of serpentinized mantle in the hyper-extended margin of the approaching continent was responsible for the increased magma productivity and crustal thickening.

Effect of mass transport along interfaces and grain boundaries on copper interconnect degradation

2004 ◽  
Vol 812 ◽  
Author(s):  
Ehrenfried Zschech ◽  
Moritz A. Meyer ◽  
Eckhard Langer
Keyword(s):  
Mass Transport ◽  
Grain Boundaries ◽  
Void Formation ◽  
Degradation Process ◽  
Copper Interconnects ◽  
Second Phase ◽  
Copper Interconnect ◽  
Void Evolution ◽  
Two Phases

AbstractIn-situ SEM electromigration studies were performed at fully embedded via/line interconnect structures to visualize the time-dependent void evolution in inlaid copper interconnects. Void formation, growth and movement, and consequently interconnect degradation, depend on both interface bonding and copper microstructure. Two phases are distinguished for the electromigration-induced interconnect degradation process: In the first phase, agglomerations of vacancies and voids are formed at interfaces and grain boundaries, and voids move along weak interfaces. In the second phase of the degradation process, they merge into a larger void which subsequently grows into the via and eventually causes the interconnect failure. Void movement along the copper line and void growth in the via are discontinuous processes, whereas their step-like behavior is caused by the copper microstructure. Directed mass transport along inner surfaces depends strongly on the crystallographic orientation of the copper grains. Electromigration lifetime can be drastically increased by changing the copper/capping layer interface. Both an additional CoWP coating and a local copper alloying with aluminum increase the bonding strength of the top interface of the copper interconnect line, and consequently, electromigration-induced mass transport and degradation processes are reduced significantly.

Revised stratigraphy of the Mesozoic rocks of southern Cyprus

1980 ◽  
Vol 117 (6) ◽  
pp. 547-563 ◽  
Author(s):  
R. E. Swarbrick ◽  
A. H. F. Robertson
Keyword(s):  
Oceanic Crust ◽  
Continental Margin ◽  
Late Cretaceous ◽  
Sedimentary Cover ◽  
Igneous Rocks ◽  
Late Triassic ◽  
Metamorphic Rocks ◽  
Southern Cyprus

SummaryRecent resurgence of interest in the Mesozoic rocks of SW and southern Cyprus necessitates redefinition of the Mesozoic sedimentary and igneous rocks in line with modern stratigraphical convention. Two fundamentally different rocks associations are present, the Troodos Complex, not redefined, a portion of late Cretaceous oceanic crust, and the Mamonia Complex, the tectonically dismembered remnants of a Mesozoic continental margin. Based on earlier work, the Mamonia Complex is divided into two groups, each subdivided into a number of subsidiary formations and members. The Ayios Photios Group is wholly sedimentary, and records the evolution of a late Triassic to Cretaceous inactive continental margin. The Dhiarizos Group represents Triassic alkalic volcanism and sedimentation adjacent to a continental margin. Several other formations not included in the two groups comprise sedimentary mélange and metamorphic rocks. The Troodos Complex possesses an in situ late Cretaceous sedimentary cover which includes two formations of ferromanganiferous pelagic sediments, radiolarites and volcaniclastic sandstones. The overlying Cainozoic calcareous units are not redefined here.

Origin of syn-collisional granitoids in the Gangdese orogen: Reworking of the juvenile arc crust and the ancient continental crust

2021 ◽  
Author(s):  
Yu-Wei Tang ◽  
Long Chen ◽  
Zi-Fu Zhao ◽  
Yong-Fei Zheng
Keyword(s):  
Partial Melting ◽  
Continental Crust ◽  
Continental Collision ◽  
Late Eocene ◽  
Igneous Rocks ◽  
Early Eocene ◽  
Southern Tibet ◽  
Crustal Rocks ◽  
Mafic Magmas ◽  
T Values

Granitoids at convergent plate boundaries can be produced either by partial melting of crustal rocks (either continental or oceanic) or by fractional crystallization of mantle-derived mafic magmas. Whereas granitoid formation through partial melting of the continental crust results in reworking of the pre-existing continental crust, granitoid formation through either partial melting of the oceanic crust or fractional crystallization of the mafic magmas leads to growth of the continental crust. This category is primarily based on the radiogenic Nd isotope compositions of crustal rocks; positive εNd(t) values indicate juvenile crust whereas negative εNd(t) values indicate ancient crust. Positive εNd(t) values are common for syn-collisional granitoids in southern Tibet, which leads to the hypothesis that continental collision zones are important sites for the net growth of continental crust. This hypothesis is examined through an integrated study of in situ zircon U-Pb ages and Hf isotopes, whole-rock major trace elements, and Sr-Nd-Hf isotopes as well as mineral O isotopes for felsic igneous rocks of Eocene ages from the Gangdese orogen in southern Tibet. The results show that these rocks can be divided into two groups according to their emplacement ages and geochemical features. The first group is less granitic with lower SiO2 contents of 59.82−64.41 wt%, and it was emplaced at 50−48 Ma in the early Eocene. The second group is more granitic with higher SiO2 contents of 63.93−68.81 wt%, and it was emplaced at 42 Ma in the late Eocene. The early Eocene granitoids exhibit relatively depleted whole-rock Sr-Nd-Hf isotope compositions with low (87Sr/86Sr)i ratios of 0.7044−0.7048, positive εNd(t) values of 0.6−3.9, εHf(t) values of 6.5−10.5, zircon εHf(t) values of 1.6−12.1, and zircon δ18O values of 5.28−6.26‰. These isotopic characteristics are quite similar to those of Late Cretaceous mafic arc igneous rocks in the Gangdese orogen, which indicates their derivation from partial melting of the juvenile mafic arc crust. In comparison, the late Eocene granitoids have relatively lower MgO, Fe2O3, Al2O3, and heavy rare earth element (HREE) contents but higher K2O, Rb, Sr, Th, U, Pb contents, Sr/Y, and (La/Yb)N ratios. They also exhibit more enriched whole-rock Sr-Nd-Hf isotope compositions with high (87Sr/86Sr)i ratios of 0.7070−0.7085, negative εNd(t) values of −5.2 to −3.9 and neutral εHf(t) values of 0.9−2.3, and relatively lower zircon εHf(t) values of −2.8−8.0 and slightly higher zircon δ18O values of 6.25−6.68‰. An integrated interpretation of these geochemical features is that both the juvenile arc crust and the ancient continental crust partially melted to produce the late Eocene granitoids. In this regard, the compositional evolution of syn-collisional granitoids from the early to late Eocene indicates a temporal change of their magma sources from the complete juvenile arc crust to a mixture of the juvenile and ancient crust. In either case, the syn-collisional granitoids in the Gangdese orogen are the reworking products of the pre-existing continental crust. Therefore, they do not contribute to crustal growth in the continental collision zone.

Sign in / Sign up

Export Citation Format

Share Document