scholarly journals Room-Temperature Preparation of Ta Ions-Containing Ionic Liquid and its Vapor Deposition toward Ta-Oxide Film Coating

2022 ◽  
Author(s):  
Nana Hozuki ◽  
Kenichi Kaminaga ◽  
Shingo Maruyama ◽  
Daisuke Shiga ◽  
Hiroshi Kumigashira ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Oxide Film ◽  
Room Temperature ◽  
Film Coating ◽  
Metal Plate ◽  
Photoemission Spectroscopy ◽  
X Ray ◽  
Vacuum Forming ◽  
Order Of Magnitude ◽  
Temperature Preparation

Abstract Ta ions-containing solutions, which are brown in color with no precipitation, were successfully prepared through an electroelution process with ionic liquid (IL). An as-delivered Ta metal plate covered with a passivation oxide film could be easily eluted even at room temperature by simply applying an anodic potential of, e.g. +2.2 V vs. Ag in [Bmim][PF6] IL. According to the quantity of electric charge required for oxidation of Ta, most Ta ions in the IL were suggested to be in an oxidation state of +5, which was also confirmed by x-ray photoemission spectroscopy (XPS). Ta ions in IL were found to thermally evaporate together with IL molecules by heating in a vacuum, forming a deposit of the Ta ions-containing IL on a substrate. The Ta concentrations in the deposits were reduced uniquely by about one order of magnitude from those in the original bulk source through the evaporation process under the present conditions. Furthermore, a possibility of the formation of thin film-like Ta oxide from such a Ta ions-containing IL deposit and its bulk droplet prepared on substrates by annealing in air at 1000oC will be discussed.

Long lifetime phosphorescence and X-ray scintillation of chlorobismuthate hybrids incorporating ionic liquid cations

2021 ◽  
Author(s):  
Jian-Ce Jin ◽  
Yang-Peng Lin ◽  
Yi-Heng Wu ◽  
Liaokuo Gong ◽  
Nan-Nan Shen ◽  
...  
Keyword(s):  
Ionic Liquid ◽  
Room Temperature ◽  
Room Temperature Phosphorescence ◽  
X Ray ◽  
Long Lifetime

Two chlorobismuthate hybrids incorportating ionic liquid cations (ILCs) with second-level room-temperature phosphorescence (RTP) were obtained, namely [Emim]BiCl4(bp2do) (1) and [Emmim]BiCl4(bp2do) (2) (Emim = 1-ethyl-3-methylimidazolium, Emmim = 1-ethyl-2,3-dimethylimidazolium, bp2do = 2,2'-bipyridyl-1,1'-dioxide)....

Structure and Conductivity of Iodine-Doped C60 Thin Films

1994 ◽  
Vol 359 ◽  
Author(s):  
Jun Chen ◽  
Haiyan Zhang ◽  
Baoqiong Chen ◽  
Shaoqi Peng ◽  
Ning Ke ◽  
...  
Keyword(s):  
Thin Films ◽  
Electrical Conductivity ◽  
Room Temperature ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Thermally Activated ◽  
Order Of Magnitude

ABSTRACTWe report here the results of our study on the properties of iodine-doped C60 thin films by IR and optical absorption, X-ray diffraction, and electrical conductivity measurements. The results show that there is no apparent structural change in the iodine-doped samples at room temperature in comparison with that of the undoped films. However, in the electrical conductivity measurements, an increase of more that one order of magnitude in the room temperature conductivity has been observed in the iodine-doped samples. In addition, while the conductivity of the undoped films shows thermally activated temperature dependence, the conductivity of the iodine-doped films was found to be constant over a fairly wide temperature range (from 20°C to 70°C) exhibiting a metallic feature.

scholarly journals Effect of Room Temperature Ionic Liquids for Electroless Nickel Plating on Acrylonitrile Butadiene Styrene Plastic

2019 ◽  
Vol 25 (3) ◽  
pp. 276-280
Author(s):  
Canan URAZ
Keyword(s):  
Ionic Liquid ◽  
Ionic Liquids ◽  
Room Temperature ◽  
Acrylonitrile Butadiene Styrene ◽  
Electroless Nickel ◽  
Room Temperature Ionic Liquids ◽  
Electroless Nickel Plating ◽  
Nickel Plating ◽  
X Ray ◽  
Butadiene Styrene

In this study, electroless nickel (EN) plating on acrylonitrile butadiene styrene (ABS) engineering plastic using room temperature ionic liquids (RTIL) was studied. Electroless plating is a fundamental step in metal plating on plastic. This step makes the plastic conductive and makes it possible to a homogeneous and hard plating without using any hazardous and unfriendly chemical such as palladium, tin, etc. In the industry there are many distinct chemical materials both catalysts and activation solutions for the electroless bath which is one of the most important parts of the process. In this study the effects of the ionic liquid, plating time, and sand paper size were investigated on electroless nickel plating. The etching and the plating processes were performed with environmentally friendly chemicals instead of the chromic and sulphuric acids used in the traditional processes. Experiments were carried out with and without ionic liquid, EMIC, 1-ethyl-3-methyl imidazolium chloride (C6H11N2Cl), and with 400, 500 and 800 grit sandpaper with the application of the sand attrition process and 70, 80, and 90 °C bath temperatures with 30, 60, and 90 minutes of deposition time. The surface morphology and the thickness of deposit analysis were performed using the Fischer scope X-Ray XDL-B System, X-ray Diffraction (XRD), and Scanning Electron Microscopy (SEM). Due to the results of the experiments and analysis, the electroless nickel plating on ABS plastic was a success. The best plating was obtained at 5.010 μm as the maximum plating thickness, at 90 min of plating time and 80 °C as the plating bath temperature for electroless nickel plating on ABS plastic whit the surface activated with 800 grit sandpaper using EMIC ionic liquid. DOI: http://dx.doi.org/10.5755/j01.ms.25.3.20116

Intercalation of Acceptors and Donors in Highly Ordered Graphite Fibers

1982 ◽  
Vol 20 ◽  
Author(s):  
T.C. Chieu ◽  
G. Timp ◽  
M.S. Dresselhaus
Keyword(s):  
Raman Spectroscopy ◽  
Room Temperature ◽  
Skin Depth ◽  
X Ray Diffraction ◽  
Repeat Distance ◽  
Temperature Conductivity ◽  
Room Temperature Conductivity ◽  
X Ray ◽  
Order Of Magnitude ◽  
Graphite Fibers

ABSTRACTThe intercalation of various acceptors and donors into graphite fibers, prepared from benzene-derived precursor materials is investigated by Raman spectroscopy, x-ray diffraction, electron diffraction, lattice fringing, and electrical resistivity measurements. Evidence for formation of well-staged acceptor compounds is provided by Debye-Scherrer x-ray diffraction which probes the bulk fiber and by Raman spectroscopy which probes an optical skin depth (< 0.1 μm). Lattice fringing measurements provide direct observation of large regions (up to 50 Aring; × 400 Aring;) of defectfree single-staged regions. Values for the c-axis repeat distance Ic are obtained by indexing (00l) lines of the x-ray diffraction pattern. Raman results show characteristic upshifted modes for stage 1 acceptor compounds with a sharpening in linewidth as compared to the E2g2 mode of the pristine fiber. The room temperature electrical conductivity is increased about an order of magnitude upon intercalation and exhibits a metallic dependence on temperature. The highest air-stable room temperature conductivity 1.4 × 105 (Ω-cm)−l ever reported for an intercalated fiber has been achieved.

Recovery of nanosize zinc from phosphor wastes with an ionic liquid

2009 ◽  
Vol 6 (3) ◽  
pp. 268 ◽  
Author(s):  
Hsin-Liang Huang ◽  
H. Paul Wang ◽  
Edward M. Eyring ◽  
Juu-En Chang
Keyword(s):  
Ionic Liquid ◽  
Absorption Spectroscopy ◽  
Room Temperature ◽  
Bond Distance ◽  
Extraction Process ◽  
Room Temperature Ionic Liquid ◽  
Zns Nanoparticles ◽  
Recovery Method ◽  
X Ray ◽  
X Ray Absorption

Environmental context. Very fine phosphor ashes are discharged from particulate collection systems (such as bag houses) in the cathode ray tube or television disassembling processes. Effective recovery of ZnO and ZnS nanoparticles from the phosphor ash can be achieved by extraction with a room temperature ionic liquid. By synchrotron radiation X-ray absorption spectroscopy, the obtained molecular scale data turn out to be very useful in revealing speciation of zinc in the extraction process, which also facilitates the development of a simple nanoparticle recovery method. Abstract. An effective, simple method has been developed for the recovery of ZnO and ZnS nanoparticles from hazardous phosphor ash waste. Experimentally, zinc (77%) in the phosphor ash (that contains mainly zinc (91%)) can be recovered by extraction with a room temperature ionic liquid (RTIL) ([C4mim][PF6], 1-butyl-3-methylimidazolium hexafluorophosphate). Component fitted X-ray absorption near edge structure (XANES) spectra of zinc indicate that metallic zinc (Zn) (9%) in the phosphor ash can be dissolved to form a Zn2+–1-methylimidazole ([mim]) complex during extraction with the RTIL. ZnS and ZnO nanoparticles (60–61%) can also be extracted from the phosphor. Over the 298–523 K temperature range, desired ZnO/ZnS ratios (0.3–0.6) can be obtained since interconversion of ZnS to ZnO in the RTIL is temperature dependent. The Fourier transformed extended X-ray absorption fine structure (EXAFS) data also show that the nanosize ZnS extracted in the RTIL possesses a Zn–S bond distance of 2.33 Å with coordination numbers (CNs) of 3.6–3.7. At 523 K, in the RTIL, ~30% of the ZnS is oxidised to form octahedral ZnO (with a bond distance of 2.10 Å and a CN of 6.1) that may coat the surfaces of the ZnS nanoparticles. This work exemplifies the utilisation of X-ray absorption spectroscopy (EXAFS and XANES) to reveal speciation and possible reaction pathways in a nanoparticle extraction process (with a RTIL) in detail.

scholarly journals [HMIM][Br9]: a Room-temperature Ionic Liquid Based on a Polybromide Anion

2013 ◽  
Vol 68 (10) ◽  
pp. 1103-1107 ◽  
Author(s):  
Heike Haller ◽  
Michael Hog ◽  
Franziska Scholz ◽  
Harald Scherer ◽  
Ingo Krossing ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Raman Spectroscopy ◽  
Ionic Liquid ◽  
Nmr Spectroscopy ◽  
Single Crystal ◽  
Room Temperature ◽  
High Electrical Conductivity ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray

[HMIM][Br9] ([HMIM]=1-hexyl-3-methylimidazolium) has been investigated by Raman spectroscopy, single-crystal X-ray diffraction and NMR spectroscopy. Conductivity measurements show a high electrical conductivity like other polybromides.

XPS STUDIES OF THE STABILITY OF A ZIRCONIUM CARBIDE FILM IN THE PRESENCE OF ZIRCONIUM OXIDE AND HYDROGEN

1995 ◽  
Vol 02 (03) ◽  
pp. 297-303 ◽  
Author(s):  
P.C. WONG ◽  
Y.S. LI ◽  
K.A.R. MITCHELL
Keyword(s):  
Oxide Film ◽  
Photoelectron Spectroscopy ◽  
Zirconium Oxide ◽  
Room Temperature ◽  
Hydrogen Plasma ◽  
Zirconium Carbide ◽  
X Ray ◽  
The Stability ◽  
Zirconium Oxide Film ◽  
Carbide Component

X-ray photoelectron spectroscopy (XPS) has been used to study the interfacial chemistries of a 65-Å film prepared by depositing zirconium in an oxidizing environment onto a methane-pretreated 11-Å thick zirconium oxide film, which initially was deposited onto a gold substrate. The second metal deposition results in an outermost region composed of a mixed zirconium oxide, while below there is metallic zirconium followed by zirconium carbide and carbon on top of the first zirconium oxide film, which is itself in contact with the gold. The carbide component showed no changes on heating to 425°C, on treating with a hydrogen plasma at room temperature, or on heating the resulting film to 425°C. The oxide layers do show characteristic changes, and this also contrasts with earlier observations for a zirconium sulphide film. The zirconium carbide Zr3d 5/2 component has a binding energy of 180.6 eV.

scholarly journals Graphene-Ionic Liquid Thin Film Nanolubricant

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 535 ◽  
Author(s):  
María-Dolores Avilés ◽  
Ramón Pamies ◽  
José Sanes ◽  
María-Dolores Bermúdez
Keyword(s):  
Ionic Liquid ◽  
Film Thickness ◽  
Photoelectron Spectroscopy ◽  
Room Temperature ◽  
Surface Damage ◽  
Thin Layers ◽  
Energy Dispersive Analysis ◽  
Lubricant Film Thickness ◽  
X Ray ◽  
Transmission Electron

Graphene (0.5 wt.%) was dispersed in the hydrophobic room-temperature ionic liquid 1-octyl-3-methylimidazolium bis(trifluoromethanesulfonyl) imide (IL) to obtain a new non-Newtonian (IL + G) nanolubricant. Thin layers of IL and (IL + G) lubricants were deposited on stainless steel disks by spin coating. The tribological performance of the new thin layers was compared with those of full fluid lubricants. Friction coefficients for neat IL were independent of lubricant film thickness. In contrast, for (IL + G) the reduction of film thickness not only afforded 40% reduction of the friction coefficient, but also prevented wear and surface damage. Results of surface profilometry, scanning and transmission electron microscopy (SEM and TEM), energy dispersive analysis (EDX), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were discussed.

Sign in / Sign up

Export Citation Format

Share Document