scholarly journals Review—Synthesis and Electrochemical Applications of Molybdenum Carbide: Recent Progress and Perspectives

Author(s):  
Sanjay Upadhyay ◽  
Om Prakash Pandey

Abstract In this review, we summarize the latest research progress on Mo2C based materials for various electrochemical applications. It starts with discussing the different synthesis methods and the tactics for modifying the physicochemical characteristics of Mo2C. In addition, the variables that influence the morphology and electrochemical performance of Mo2C have been explored. The synthesis methods are examined based on their tricks, benefits, and drawbacks, including solid-gas, solid-solid, solid-liquid, and some other processes (chemical vapor deposition, Sonochemical, microwave-assisted, plasma, etc.). Methods that are safe, cost-effective, environmentally friendly, and suited for large-scale production of Mo2C are given special consideration. The solid-solid reaction is found to be a facile and cost-effective method to synthesize Mo2C structures having high surface area and small particle size. Also, the various electrochemical applications of Mo2C are reviewed. Mo2C is an extremely active and durable electrocatalyst mainly for hydrogen evolution reaction (HER). The electrochemical parameters such as activity, stability, etc., are examined and described in detail. The possible ways to improve the electrochemical performance of Mo2C are discussed. Finally, the difficulties in developing Mo2C nanostructures that are suited for energy storage and conversion applications are discussed.

2021 ◽  
Vol 4 (1) ◽  
Author(s):  
Takuya Tsuzuki

AbstractIn the last decades, mechanochemical processing has emerged as a sustainable method for the large-scale production of a variety of nanomaterials. In particular, mechanochemical synthesis can afford well-dispersed metal-oxide nanoparticles, which are used in wide-ranging applications including energy storage and conversion, environmental monitoring, or biomedical uses. This article reviews recent progress in the mechanochemical synthesis of metal-oxide nanoparticles, explores reaction mechanisms, and contrasts the influence of chosen process parameters on the properties of end products. The role of choice of reaction pathway, as well as advantages and limitations compared to other synthesis methods are discussed. A prospect for future development of this synthetic method is proposed.


CrystEngComm ◽  
2014 ◽  
Vol 16 (9) ◽  
pp. 1825 ◽  
Author(s):  
Muhammad Tahir ◽  
Chuanbao Cao ◽  
Faheem K. Butt ◽  
Sajid Butt ◽  
Faryal Idrees ◽  
...  

RSC Advances ◽  
2020 ◽  
Vol 10 (34) ◽  
pp. 20118-20128 ◽  
Author(s):  
Mahsa Asadniaye Fardjahromi ◽  
Amir Razmjou ◽  
Graham Vesey ◽  
Fatemeh Ejeian ◽  
Balarka Banerjee ◽  
...  

Mussel inspired ZIF8 microcarriers with high surface area, biocompatibility, and nanoscale surface roughness are applied to enhance mesenchymal stem cell attachment and proliferation in 3D cell culture.


Gels ◽  
2018 ◽  
Vol 4 (3) ◽  
pp. 66 ◽  
Author(s):  
Despoina Chriti ◽  
Grigorios Raptopoulos ◽  
Maria Papastergiou ◽  
Patrina Paraskevopoulou

We report the room temperature synthesis of spherical millimeter-size polyurea (PUA) aerogel beads. Wet-gels of said beads were obtained by dripping a propylene carbonate solution of an aliphatic triisocyanate based on isocyanurate nodes into a mixture of ethylenediamine and heavy mineral oil. Drying the resulting wet spherical gels with supercritical fluid (SCF) CO2 afforded spherical aerogel beads with a mean diameter of 2.7 mm, and a narrow size distribution (full width at half maximum: 0.4 mm). Spherical PUA aerogel beads had low density (0.166 ± 0.001 g cm–3), high porosity (87% v/v) and high surface area (197 m2 g–1). IR, 1H magic angle spinning (MAS) and 13C cross-polarization magic angle spinning (CPMAS) NMR showed the characteristic peaks of urea and the isocyanurate ring. Scanning electron microscopy (SEM) showed the presence of a thin, yet porous skin on the surface of the beads with a different (denser) morphology than their interior. The synthetic method shown here is simple, cost-efficient and suitable for large-scale production of PUA aerogel beads.


2020 ◽  
Vol 2020 ◽  
pp. 1-9
Author(s):  
Aline M. Barreiro ◽  
Geneviève K. Pinheiro ◽  
Bruno N. Wesling ◽  
Daliana Müller ◽  
Letícia T. Scarabelot ◽  
...  

Inkjet printing presents a high potential for cost reduction of electronic devices manufacturing due to the capacity to deposit materials with high precision, less material waste, and large-scale production through the roll-to-roll printing processes. In this work, a nanostructured TiO2 ink was developed using TiO2 aerogel and an alkaline aqueous solution, which resulted in a very stable suspension. A high-intensity ultrasonic mixer was used to fragment and disperse TiO2 aerogels producing suspensions with particles smaller than 200 nm, which are suitable for the inkjet printing process. For the development of the ink, the viscosity and surface tension were adjusted by using glycerol and a surfactant (Triton X-100). The influence of those components on the properties of the ink was evaluated for different concentrations. After formulation of the inks, the printing parameters were adjusted to optimize the process. Films with high surface area and less than 100 nm grain size were successfully produced. Electrical measurements revealed a resistive-like behavior with the sheet resistance increasing with number of printed layers.


Processes ◽  
2021 ◽  
Vol 9 (12) ◽  
pp. 2160
Author(s):  
Sergio González-Poggini ◽  
Andreas Rosenkranz ◽  
Melanie Colet-Lagrille

The removal of pharmaceuticals from wastewater is critical due to their considerable risk on ecosystems and human health. Additionally, they are resistant to conventional chemical and biological remediation methods. Two-dimensional nanomaterials are a promising approach to face this challenge due to their combination of high surface areas, high electrical conductivities, and partially optical transparency. This review discusses the state-of-the-art concerning their use as adsorbents, oxidation catalysts or photocatalysts, and electrochemical catalysts for water treatment purposes. The bibliographic search bases upon academic databases including articles published until August 2021. Regarding adsorption, high removal capacities (>200 mg g−1) and short equilibrium times (<30 min) are reported for molybdenum disulfide, metal-organic frameworks, MXenes, and graphene oxide/magnetite nanocomposites, attributed to a strong adsorbate-adsorbent chemical interaction. Concerning photocatalysis, MXenes and carbon nitride heterostructures show enhanced charge carriers separation, favoring the generation of reactive oxygen species to degrade most pharmaceuticals. Peroxymonosulfate activation via pure or photo-assisted catalytic oxidation is promising to completely degrade many compounds in less than 30 min. Future work should be focused on the exploration of greener synthesis methods, regeneration, and recycling at the end-of-life of two-dimensional materials towards their successful large-scale production and application.


Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 1893
Author(s):  
Sónia O. Pereira ◽  
Nuno F. Santos ◽  
Alexandre F. Carvalho ◽  
António J. S. Fernandes ◽  
Florinda M. Costa

Carbon-based electrodes have demonstrated great promise as electrochemical transducers in the development of biosensors. More recently, laser-induced graphene (LIG), a graphene derivative, appears as a great candidate due to its superior electron transfer characteristics, high surface area and simplicity in its synthesis. The continuous interest in the development of cost-effective, more stable and reliable biosensors for glucose detection make them the most studied and explored within the academic and industry community. In this work, the electrochemistry of glucose oxidase (GOx) adsorbed on LIG electrodes is studied in detail. In addition to the well-known electroactivity of free flavin adenine dinucleotide (FAD), the cofactor of GOx, at the expected half-wave potential of −0.490 V vs. Ag/AgCl (1 M KCl), a new well-defined redox pair at 0.155 V is observed and shown to be related to LIG/GOx interaction. A systematic study was undertaken in order to understand the origin of this activity, including scan rate and pH dependence, along with glucose detection tests. Two protons and two electrons are involved in this reaction, which is shown to be sensitive to the concentration of glucose, restraining its origin to the electron transfer from FAD in the active site of GOx to the electrode via direct or mediated by quinone derivatives acting as mediators.


2021 ◽  
Author(s):  
Gurwinder Singh ◽  
Rohan Bahadur ◽  
Ajanya Maria Ruban ◽  
Jefrin Marykala Davidraj ◽  
Dawei Su ◽  
...  

Nanoporous biocarbons derived from waste biomass have created significant attention owing to their great potential for energy storage and conversion and water purification. However, the fabrication technology for these materials...


RSC Advances ◽  
2014 ◽  
Vol 4 (85) ◽  
pp. 45244-45250 ◽  
Author(s):  
Yun Meng ◽  
Liyuan Zhang ◽  
Liyuan Chai ◽  
Wanting Yu ◽  
Ting Wang ◽  
...  

PmPD nanobelts with high adsorption performance have been synthesized by using CTAP as oxidants.


Sign in / Sign up

Export Citation Format

Share Document