scholarly journals Out-of-Plane Vibration of Curved Uniform and Tapered Beams with Additional Mass

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Hamdi Alper Özyiğit ◽  
Mehmet Yetmez ◽  
Utku Uzun
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Variable Cross ◽  
Additional Mass ◽  
Inertia Effects ◽  
Tapered Beam ◽  
Out Of Plane ◽  
Good Agreement

As there is a gap in literature about out-of-plane vibrations of curved and variable cross-sectioned beams, the aim of this study is to analyze the free out-of-plane vibrations of curved beams which are symmetrically and nonsymmetrically tapered. Out-of-plane free vibration of curved uniform and tapered beams with additional mass is also investigated. Finite element method is used for all analyses. Curvature type is assumed to be circular. For the different boundary conditions, natural frequencies of both symmetrical and unsymmetrical tapered beams are given together with that of uniform tapered beam. Bending, torsional, and rotary inertia effects are considered with respect to no-shear effect. Variations of natural frequencies with additional mass and the mass location are examined. Results are given in tabular form. It is concluded that (i) for the uniform tapered beam there is a good agreement between the results of this study and that of literature and (ii) for the symmetrical curved tapered beam there is also a good agreement between the results of this study and that of a finite element model by using MSC.Marc. Results of out-of-plane free vibration of symmetrically tapered beams for specified boundary conditions are addressed.

Free vibration analysis of a rectangular plate carrying multiple various concentrated elements

2003 ◽  
Vol 217 (2) ◽  
pp. 171-183 ◽  
Author(s):  
J-S Wu ◽  
H-M Chou ◽  
D-W Chen
Keyword(s):  
Finite Element ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Rectangular Plate ◽  
Normal Mode ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Equation Of Motion ◽  
Mode Shapes

The dynamic characteristic of a uniform rectangular plate with four boundary conditions and carrying three kinds of multiple concentrated element (rigidly attached point masses, linear springs and elastically mounted point masses) was investigated. Firstly, the closed-form solutions for the natural frequencies and the corresponding normal mode shapes of a rectangular ‘bare’ (or ‘unconstrained’) plate (without any attachments) with the specified boundary conditions were determined analytically. Next, by using these natural frequencies and normal mode shapes incorporated with the expansion theory, the equation of motion of the ‘constrained’ plate (carrying the three kinds of multiple concentrated element) were derived. Finally, numerical methods were used to solve this equation of motion to give the natural frequencies and mode shapes of the ‘constrained’ plate. To confirm the reliability of previous free vibration analysis results, a finite element analysis was also conducted. It was found that the results obtained from the above-mentioned two approaches were in good agreement. Compared with the conventional finite element method (FEM), the approach employed in this paper has the advantages of saving computing time and achieving better accuracy, as can be seen from the existing literature.

scholarly journals The Effect of Various Fiber Orientations and Boundary Conditions on Natural Frequencies of Laminated Composite Beam

2018 ◽  
Vol 7 (3.11) ◽  
pp. 67 ◽  
Author(s):  
M Arif Mat Norman ◽  
M Amiruddin Zainuddin ◽  
Jamaluddin Mahmud
Keyword(s):  
Boundary Condition ◽  
Finite Element ◽  
Aspect Ratio ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Composite Beam ◽  
Natural Frequencies ◽  
Laminated Composite ◽  
Mode Shapes ◽  
Laminated Composite Beam

This paper investigates the free vibration characteristics of laminate composite beam for various lamination schemes and under various boundary conditions. A beam model with the aspect ratio (length to thickness) of 25 to 150 made of carbon/ epoxy laminates under free vibration were constructed using a commercially available finite element software (ANSYS). The varied parameters are the lamination schemes (cross ply, angle ply and unidirectional ply) and boundary conditions (Clamp-Free (C-F), Clamp-Clamp (C-C), Clamp-Hanger (C-H), Free-Free (F-F) and Hanger-Hanger (H-H) ). For each case, finite element simulations were performed and the natural frequencies were determined. Mode shapes were also analyzed to observe the beam’s deformation behavior. Results showed that increasing aspect ratio will decrease natural frequencies for the first seven mode shapes. In terms of lamination scheme, the unidirectional ply produced the highest frequency (34.26 Hz), followed by cross ply (34.05 Hz) and angle ply (13.60 Hz) at the aspect ratio of 25. In terms of boundary conditions, the Hanger-Hanger boundary condition produced the highest natural frequency (2272.52  Hz) at the aspect ratio of 25, while Clamped-Free boundary condition produced the lowest frequency (2.28 Hz) at the aspect ratio of 150. In general, it can be concluded that the current study is useful and has contributed significant knowledge to better understand of effect of various fiber orientations and boundary conditions on the natural frequencies of laminated composite beam. 

Analysis of vibration in rotating pretwisted functionally graded graphene platelets reinforced nanocomposite laminated blades with an attached point mass

2021 ◽  
pp. 095440622110084
Author(s):  
Amin Ghorbani Shenas ◽  
Parviz Malekzadeh ◽  
Sima Ziaee
Keyword(s):  
Free Vibration ◽  
Boundary Conditions ◽  
Polymer Matrix ◽  
Natural Frequencies ◽  
Weight Fraction ◽  
Functionally Graded ◽  
Point Mass ◽  
Attached Mass ◽  
Graphene Platelets ◽  
Twisted Beam

This work presents an investigation on the free vibration behavior of rotating pre-twisted functionally graded graphene platelets reinforced composite (FG-GPLRC) laminated blades/beams with an attached point mass. The considered beams are constituted of [Formula: see text] layers which are bonded perfectly and made of a mixture of isotropic polymer matrix and graphene platelets (GPLs). The weight fraction of GPLs changes in a layer-wise manner. The effective material properties of FG-GPLRC layers are computed by using the modified Halpin-Tsai model together with rule of mixture. The free vibration eigenvalue equations are developed based on the Reddy’s third-order shear deformation theory (TSDT) using the Chebyshev–Ritz method under different boundary conditions. After validating the approach, the influences of the GPLs distribution pattern, GPLs weight fraction, angular velocity, the variation of the angle of twist along the beam axis, the ratio of attached mass to the beam mass, boundary conditions, position of attached mass, and geometry on the vibration behavior are investigated. The findings demonstrate that the natural frequencies of the rotating pre-twisted FG-GPLRC laminated beams significantly increases by adding a very small amount of GPLs into polymer matrix. It is shown that placing more GPLs near the top and bottom surfaces of the pre-twisted beam is an effective way to strengthen the pre-twisted beam stiffness and increase the natural frequencies.

Efficient Fatigue Testing of Tubular Joints

2015 ◽  
Author(s):  
P. Thibaux ◽  
J. Van Wittenberghe ◽  
E. Van Pottelberg ◽  
M. Van Poucke ◽  
P. De Baets ◽  
...  
Keyword(s):  
Finite Element ◽  
Fatigue Testing ◽  
Fatigue Loading ◽  
Tubular Joints ◽  
Testing Method ◽  
Out Of Plane ◽  
Resonance Principle ◽  
Tubular Joint ◽  
The Cost ◽  
Good Agreement

Tubular joints are intensively used in off-shore structures for shallow waters. Depending on the sea conditions and the type of structure, the design can be fatigue driven. This is particularly the case for off-shore wind turbines, where turbulences are generating a fatigue loading. Any improvement of the fatigue performance of the tubular joint would be beneficial to reduce the weight and the cost of the structure. To assess efficiently the fatigue resistance of the tubular joint, a testing method has been developed based on the resonance principle. The complete circumference of the welded joint can be loaded, successively in the in-plane and out-of-plane modes at a frequency close to 20Hz. Finite element computations were used to investigate the feasibility of the concept. Then, an X-node was made and successfully tested to investigate the stress distribution along the weld. The experimental results were compared with finite element computations, giving a good agreement.

NUMERICAL AND EXPERIMENTAL STUDY ON FREE VIBRATION OF DELAMINATED WOVEN FIBER GLASS/EPOXY COMPOSITE PLATES

2012 ◽  
Vol 12 (02) ◽  
pp. 377-394 ◽  
Author(s):  
J. MOHANTY ◽  
S. K. SAHU ◽  
P. K. PARHI
Keyword(s):  
Experimental Study ◽  
Aspect Ratio ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Numerical Study ◽  
Shear Deformation Theory ◽  
Composite Plates ◽  
Fiber Glass ◽  
Number Of Layers

This paper presents a combined experimental and numerical study of free vibration of industry-driven woven fiber glass/epoxy (G/E) composite plates with delamination. Using the first-order shear deformation theory, an eight-noded two-dimensional quadratic isoparametric element was developed, which has five degrees of freedom per node. In the experimental study, the influence of various parameters such as the delamination size, boundary conditions, fiber orientations, number of layers, and aspect ratio on the natural frequencies of delaminated composite plates are investigated. Comparison of the numerical results with experimental ones shows good agreement. Fundamental natural frequencies are found to decrease with the increase in the delamination size and fiber orientation and increases with the increase in the number of layers and aspect ratio of delaminated composite plates. The natural frequency of the delaminated composite plate varies significantly for different boundary conditions.

scholarly journals Analysis of Timoshenko beam with Koch snowflake cross-section and variable properties in different boundary conditions using finite element method

2021 ◽  
Vol 13 (11) ◽  
pp. 168781402110609
Author(s):  
Hossein Talebi Rostami ◽  
Maryam Fallah Najafabadi ◽  
Davood Domiri Ganji
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Boundary Conditions ◽  
Natural Frequency ◽  
Cross Section ◽  
Timoshenko Beam ◽  
Natural Frequencies ◽  
Variable Properties ◽  
The Third ◽  
Koch Snowflake

This study analyzed a Timoshenko beam with Koch snowflake cross-section in different boundary conditions and for variable properties. The equation of motion was solved by the finite element method and verified by Solidworks simulation in a way that the maximum error was about 2.9% for natural frequencies. Displacement and natural frequency for each case presented and compared to other cases. Significant research achievements illustrate that if we change the Koch snowflake cross-section of the beam from the first iteration to the second, the area and moment of inertia will increase, and we have a 5.2% rise in the first natural frequency. Similarly, by changing the cross-section from the second iteration to the third, a 10.2% growth is observed. Also, the hollow cross-section is considered, which can enlarge the natural frequency by about 26.37% compared to a solid one. Moreover, all the clamped-clamped, hinged-hinged, clamped-free, and free-free boundary conditions have the highest natural frequency for the Timoshenko beam with the third iteration of the Koch snowflake cross-section in solid mode. Finally, examining important physical parameters demonstrates that variable density from a minimum value to the standard value along the beam increases the natural frequencies, while variable elastic modulus decreases it.

Vibrations of an Intermediately Supported U-Bend Tube

1975 ◽  
Vol 97 (1) ◽  
pp. 23-32 ◽  
Author(s):  
L. S. S. Lee
Keyword(s):  
Natural Frequency ◽  
Natural Frequencies ◽  
Experimental Tests ◽  
Bending Stiffness ◽  
Stiffness Ratio ◽  
Plane Vibration ◽  
Straight Beam ◽  
Out Of Plane ◽  
Straight Segments ◽  
Good Agreement

Vibrations of an intermediately supported U-bend tube fall into two independent classes as an incomplete ring of single span does, namely, the in-plane vibration and the coupled twist-bending out-of-plane vibration. Natural frequencies may be expressed in terms of a coefficient p which depends on the stiffness ratio k, the ratio of lengths of spans, and the supporting conditions. The effect of the torsional flexibility of a curved bar acts to release the bending stiffness of a straight beam and hence decrease the natural frequency. Some conclusions for an incomplete ring of single span may not be equally well applicable to the U-tube case due to the effects of intermediate supports and the presence of the supporting straight segments. Results of the analytical predictions and the experimental tests of an intermediately supported U-tube are in good agreement.

Analysis of free vibration of an isotropic plate with surface or internal long crack using generalized differential quadrature method

2019 ◽  
Vol 55 (1-2) ◽  
pp. 42-52
Author(s):  
Milad Ranjbaran ◽  
Rahman Seifi
Keyword(s):  
Differential Equations ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Isotropic Plate ◽  
Differential Quadrature Method ◽  
Differential Quadrature ◽  
Quadrature Method ◽  
Generalized Differential Quadrature Method ◽  
Generalized Differential

This article proposes a new method for the analysis of free vibration of a cracked isotropic plate with various boundary conditions based on Kirchhoff’s theory. The isotropic plate is assumed to have a part-through surface or internal crack. The crack is considered parallel to one of the plate edges. Existence of the crack modified the governing differential equations which were formulated based on the line-spring model. Generalized differential quadrature method discretizes the obtained governing differential equations and converts them into an algebraic system of equations. Then, an eigenvalue analysis was used to determine the natural frequencies of the cracked plates. Some numerical results are given to demonstrate the accuracy and convergence of the obtained results. To demonstrate the efficiency of the method, the results were compared with finite element solutions and available literature. Also, effects of the crack depth, its location along the thickness, the length of the crack and different boundary conditions on the natural frequencies were investigated.

scholarly journals Wave Based Method for Free Vibration Analysis of Ring Stiffened Cylindrical Shell with Intermediate Large Frame Ribs

2013 ◽  
Vol 20 (3) ◽  
pp. 459-479 ◽  
Author(s):  
Meixia Chen ◽  
Jianhui Wei ◽  
Kun Xie ◽  
Naiqi Deng ◽  
Guoxiang Hou
Keyword(s):  
Cylindrical Shell ◽  
Free Vibration ◽  
Boundary Conditions ◽  
Natural Frequencies ◽  
Free Vibration Analysis ◽  
Structure Type ◽  
Vibration Characteristics ◽  
Mode Shapes ◽  
Arbitrary Boundary ◽  
Stiffened Cylindrical Shell

Wave based method which can be recognized as a semi-analytical and semi-numerical method is presented to analyze the free vibration characteristics of ring stiffened cylindrical shell with intermediate large frame ribs for arbitrary boundary conditions. According to the structure type and the positions of discontinuities, the model is divided into different substructures whose vibration field is expanded by wave functions which are exactly analytical solutions to the governing equations of the motions of corresponding structure type. Boundary conditions and continuity equations between different substructures are used to form the final matrix to be solved. Natural frequencies and vibration mode shapes are calculated by wave based method and the results show good agreement with finite element method for clamped-clamped, shear diaphragm – shear diaphragm and free-free boundary conditions. Free vibration characteristics of ring stiffened cylindrical shells with intermediate large frame ribs are compared with those with bulkheads and those with all ordinary ribs. Effects of the size, the number and the distribution of intermediate large frame rib are investigated. The frame rib which is large enough is playing a role as bulkhead, which can be considered imposing simply supported and clamped constraints at one end of the cabin and dividing the cylindrical shell into several cabins vibrating separately at their own natural frequencies.

scholarly journals Free Vibration Analysis of Rings via Wave Approach

2018 ◽  
Vol 2018 ◽  
pp. 1-14
Author(s):  
Wang Zhipeng ◽  
Liu Wei ◽  
Yuan Yunbo ◽  
Shuai Zhijun ◽  
Guo Yibin ◽  
...  
Keyword(s):  
Free Vibration ◽  
Vibration Analysis ◽  
Natural Frequencies ◽  
Classical Method ◽  
Free Vibration Analysis ◽  
Material Parameters ◽  
Wave Approach ◽  
Out Of Plane ◽  
Vibration Transmissibility ◽  
Ring Structures

Free vibration of rings is presented via wave approach theoretically. Firstly, based on the solutions of out-of-plane vibration, propagation, reflection, and coordination matrices are derived for the case of a fixed boundary at inner surface and a free boundary at outer surface. Then, assembling these matrices, characteristic equation of natural frequency is obtained. Wave approach is employed to study the free vibration of these ring structures. Natural frequencies calculated by wave approach are compared with those obtained by classical method and Finite Element Method (FEM). Afterwards natural frequencies of four type boundaries are calculated. Transverse vibration transmissibility of rings propagating from outer to inner and from inner to outer is investigated. Finally, the effects of structural and material parameters on free vibration are discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document