scholarly journals Phytogenic Synthesis and Characterization of NiO-ZnO Nanocomposite for the Photodegradation of Brilliant Green and 4-Nitrophenol

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Sirajul Haq ◽  
Aqsa Waheed Raja ◽  
Sadiq Ur Rehman ◽  
Amine Mezni ◽  
Manel Ben Ali ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Brilliant Green ◽  
Band Gap Energy ◽  
Diospyros Kaki ◽  
X Ray Diffraction ◽  
X Ray ◽  
Weight Percentage ◽  
Tauc Plot ◽  
Transmission Electron ◽  
Cell Dimensions

The NiO-ZnO nanocomposite (NiO-ZnO NC) was synthesized by ecofriendly process by using Diospyros kaki (D. kaki) extract of leaves as reducing and capping agents. X-ray diffraction (XRD) was used for examined crystallinity, cell dimensions, and crystallite size (7.6 nm). To determine the purity of sample and weight percentage, energy dispersive X-ray (EDX) is used. The surface morphology was determined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). By using Fourier transform infrared spectroscopy (FTIR), functional groups in samples were determined. By using diffuse reflectance data (DRS), band gap energy calculated via Tauc plot was 3.23 eV. The photocatalytic activity was checked against brilliant green (BG) and 4-nitrophenol (4-NP) and 92.5% and 69.7% of brilliant green (BG) and 4-nitrophenol (4-NP) were degraded with rate of degradation which were 0.0281 and 0.011 min−1.

Synthesis of Fe2+ Ion Doped ZnS Nanoparticles

2014 ◽  
Vol 879 ◽  
pp. 155-163 ◽  
Author(s):  
Rahizana Mohd Ibrahim ◽  
Markom Masturah ◽  
Huda Abdullah
Keyword(s):  
Electron Microscopy ◽  
Optical Properties ◽  
Quantum Confinement Effect ◽  
Band Gap Energy ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Vis Spectroscopy ◽  
Co Precipitation

Nanoparticles of Zn1-xFexS ( x=0.0,0.1,0.2 and 0.3) were prepared by chemical co-precipitation method from homogenous solution of zinc and ferum salt at room temperature with controlled parameter. These nanoparticles were sterically stabilized using Sodium Hexamethaphospate (SHMP). Here, a study of the effect of Fe doping on structure, morphological and optical properties of nanoparticles was undertaken. Elemental analysis, morphological and optical properties have been investigated by Fourier-Transform-Infrared spectroscopy (FT-IR), X-Ray Fluorescence (XRF), Field Emmision Scanning Electron Microscopy (FESEM), X-ray Diffraction (XRD), Transmission Electron Microscopy (TEM) and UV-Visible Spectroscopy. FTIR measurement confirmed the presence of SHMP in the nanoparticles structure with the FESEM images depicting considerable less agglomeration of particles with the presence of SHMP. While XRF results confirm the presence of Fe2+ ion as prepared in the experiment. The particles sizes of the nanoparticles lay in the range of 2-10 nm obtained from the TEM image were in agreement with the XRD results. The absorption edge shifted to lower wavelengths with an increase in Fe concentration shown in the UV-Vis spectroscopy. The band gap energy value was in the range of 4.95 5.15 eV. The blueshift is attributed to the quantum confinement effect.

scholarly journals The Shifts of Band Gap and Binding Energies of Titania/Hydroxyapatite Material

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Nguyen Thi Truc Linh ◽  
Phan Dinh Tuan ◽  
Nguyen Van Dzung
Keyword(s):  
Electron Microscopy ◽  
Band Gap ◽  
Band Gap Energy ◽  
Binding Energies ◽  
Photoemission Spectroscopy ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hydroxyapatite Phase

The titania/hydroxyapatite (TiO2/HAp) product was prepared by precipitating hydroxyapatite in the presence of TiO(OH)2 gel in the hydrothermal system. The characteristics of the material were determined by using the measurements such as X-ray photoemission spectroscopy (XPS), X-ray diffraction (XRD), diffuse reflectance spectra (DRS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and energy dispersive X-ray (EDX). The XPS analysis showed that the binding energy values of Ca (2p1/2, 2p3/2), P (2p1/2, 2p3/2), and O 1s levels related to hydroxyapatite phase whereas those of Ti (2p3/2, 2p1/2) levels corresponded with the characterization of titanium (IV) in TiO2. The XRD result revealed that TiO2/HAp sample had hydroxyapatite phase, but anatase or rutile phases were not found out. TEM image of TiO2/HAp product showed that the surface of the plate-shaped HAp particles had a lot of smaller particles which were considered as the compound of Ti. The experimental band gap of TiO2/HAp material calculated by the DRS measurement was 3.6 eV, while that of HAp pure was 5.3 eV and that of TiO2 pure was around 3.2 eV. The shift of the band gap energy of TiO2 in the range of 3.2–3.6 eV may be related to the shifts of Ti signals of XPS spectrum.

Preparation of C60 Nanowhiskers-SnO2 Nanocomposites and Photocatalytic Degradation of Organic Dyes

2015 ◽  
Vol 15 (10) ◽  
pp. 8125-8132 ◽  
Author(s):  
Hae Soo Park ◽  
Weon Bae Ko
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Degradation ◽  
Electric Furnace ◽  
Brilliant Green ◽  
Organic Dyes ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Gas Atmosphere ◽  
Chloride Pentahydrate

C60 nanowhiskers were prepared using a liquid–liquid interfacial precipitation (LLIP) method. Tin oxide (SnO2) nanoparticles were synthesized by a reaction of tin (IV) chloride pentahydrate with ammonium nitrate in an electric furnace. The C60 nanowhiskers-SnO2 nanocomposites were calcined in an electric furnace at 700 °C under an inert argon gas atmosphere for 2 h. The crystallinity, morphology and optical properties of the samples were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and UV-vis spectrophotometry. The photocatalytic activity of the C60 nanowhiskers-SnO2 nanocomposites in the degradation of the organic dyes, such as methylene blue, methyl orange, rhodamine B, and brilliant green, under ultraviolet light at 254 nm by UV-vis spectrophotometry was evaluated and compared with that of C60 nanowhiskers and SnO2 nanoparticles. The experimental results showed that C60 nanowhiskers-SnO2 nanocomposites exhibited remarkably higher photocatalytic degradation of organic dyes compared to C60 nanowhiskers and SnO2 nanoparticles.

Facile Synthesis and Photocatalytic Performance of W18O49 Nanorods

2017 ◽  
Vol 726 ◽  
pp. 360-364
Author(s):  
Shuo Wang ◽  
Xia Xia Bai ◽  
Hui Zhang
Keyword(s):  
Electron Microscopy ◽  
Photocatalytic Performance ◽  
Band Gap Energy ◽  
Xenon Lamp ◽  
X Ray Diffraction ◽  
Facile Synthesis ◽  
X Ray ◽  
Photodegradation Efficiency ◽  
Transmission Electron ◽  
Reductive Atmosphere

W18O49 nanorods photocatalyst was successfully synthesized by a facile pyrolyzing ammonium metatungstate in a reductive atmosphere of H2 (5 vol %)/Ar. The synthesized W18O49 nanorods were characterized by X-ray diffraction (XRD), Raman spectrum, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and ultraviolet-visible (UV-Vis) absorption spectroscopy. The results show that W18O49 nanorods are about 190 nm in diameter and around 4.8 μm in length, and they possess the band-gap energy of 2.32 eV. Moreover the photocatalytic activity of W18O49 nanorods was evaluated by degrading methylene blue (MB) under visible light irradiation. The result illustrates that the W18O49 nanorods have a photodegradation efficiency of 60% for MB under the irradiation of xenon lamp (250 W, λ > 420 nm) for 2 h.

A High Resolution Study of G.P. Zones in Aluminum - 4.2 at % Silver

1982 ◽  
Vol 40 ◽  
pp. 722-723 ◽  
Author(s):  
R. Gronsky
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Computer Simulations ◽  
Structural Characteristics ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Resolution Study

The phenomenon of clustering in Al-Ag alloys has been extensively studied since the early work of Guinierl, wherein the pre-precipitation state was characterized as an assembly of spherical, ordered, silver-rich G.P. zones. Subsequent x-ray and TEM investigations yielded results in general agreement with this model. However, serious discrepancies were later revealed by the detailed x-ray diffraction - based computer simulations of Gragg and Cohen, i.e., the silver-rich clusters were instead octahedral in shape and fully disordered, atleast below 170°C. The object of the present investigation is to examine directly the structural characteristics of G.P. zones in Al-Ag by high resolution transmission electron microscopy.

Identification of calcium oxalate crystals in dried or fixed tobacco leaf

1984 ◽  
Vol 42 ◽  
pp. 288-289
Author(s):  
Vicki L. Baliga ◽  
Mary Ellen Counts
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Calcium Oxalate ◽  
Growth And Development ◽  
Polarized Light ◽  
Calcium Oxalate Crystals ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Calcium is an important element in the growth and development of plants and one form of calcium is calcium oxalate. Calcium oxalate has been found in leaf seed, stem material plant tissue culture, fungi and lichen using one or more of the following methods—polarized light microscopy (PLM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and x-ray diffraction.Two methods are presented here for qualitatively estimating calcium oxalate in dried or fixed tobacco (Nicotiana) leaf from different stalk positions using PLM. SEM, coupled with energy dispersive x-ray spectrometry (EDS), and powder x-ray diffraction were used to verify that the crystals observed in the dried leaf with PLM were calcium oxalate.

The Effect of the Microstructure of Diffusion Barriers on the Palladium Activation for Electroless Copper Deposition

2002 ◽  
Vol 716 ◽  
Author(s):  
Seok Woo Hong ◽  
Yong Sun Lee ◽  
Ki-Chul Park ◽  
Jong-Wan Park
Keyword(s):  
Electron Microscopy ◽  
Diffusion Barriers ◽  
Copper Deposition ◽  
X Ray Diffraction ◽  
Plan View ◽  
X Ray ◽  
Transmission Electron ◽  
Electroless Copper ◽  
Sheet Resistance Measurement ◽  
Scanning Electron

AbstractThe effect of microstructure of dc magnetron sputtered TiN and TaN diffusion barriers on the palladium activation for autocatalytic electroless copper deposition has been investigated by using X-ray diffraction, sheet resistance measurement, field emission scanning electron microscopy (FE-SEM) and plan view transmission electron microscopy (TEM). The density of palladium nuclei on TaN diffusion barrier increases as the grain size of TaN films decreases, which was caused by increasing nitrogen content in TaN films. Plan view TEM results of TiN and TaN diffusiton barriers showed that palladium nuclei formed mainly on the grain boundaries of the diffusion barriers.

Palladium Nanowire Thin Films via Template Growth

2003 ◽  
Vol 775 ◽  
Author(s):  
Donghai Wang ◽  
David T. Johnson ◽  
Byron F. McCaughey ◽  
J. Eric Hampsey ◽  
Jibao He ◽  
...  
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Thin Films ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Conductive Substrate ◽  
Palladium Nanowires ◽  
Efficient Route ◽  
Silica Thin Film

AbstractPalladium nanowires have been electrodeposited into mesoporous silica thin film templates. Palladium continually grows and fills silica mesopores starting from a bottom conductive substrate, providing a ready and efficient route to fabricate a macroscopic palladium nanowire thin films for potentially use in fuel cells, electrodes, sensors, and other applications. X-ray diffraction (XRD) and transmission electron microscopy (TEM) indicate it is possible to create different nanowire morphology such as bundles and swirling mesostructure based on the template pore structure.

scholarly journals Quartz Crystallite Size and Moganite Content as Indicators of the Mineralogical Maturity of the Carboniferous Chert: The Case of Cherts from Eastern Asturias (Spain)

Minerals ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 611
Author(s):  
Celia Marcos ◽  
María de Uribe-Zorita ◽  
Pedro Álvarez-Lloret ◽  
Alaa Adawy ◽  
Patricia Fernández ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Crystallite Size ◽  
Archaeological Sites ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Infrared And Raman Spectroscopy ◽  
First Time ◽  
Geological Formations

Chert samples from different coastal and inland outcrops in the Eastern Asturias (Spain) were mineralogically investigated for the first time for archaeological purposes. X-ray diffraction, X-ray fluorescence, transmission electron microscopy, infrared and Raman spectroscopy and total organic carbon techniques were used. The low content of moganite, since its detection by X-ray diffraction is practically imperceptible, and the crystallite size (over 1000 Å) of the quartz in these cherts would be indicative of its maturity and could potentially be used for dating chert-tools recovered from archaeological sites. Also, this information can constitute essential data to differentiate the cherts and compare them with those used in archaeological tools. However, neither composition nor crystallite size would allow distinguishing between coastal and inland chert outcrops belonging to the same geological formations.

Effect of synthesis and activation methods on the character of CoMo/ultrastable Y-zeolite catalysts

2021 ◽  
Vol 19 (1) ◽  
pp. 745-754
Author(s):  
Khoirina Dwi Nugrahaningtyas ◽  
Eddy Heraldy ◽  
Rachmadani ◽  
Yuniawan Hidayat ◽  
Indriana Kartini
Keyword(s):  
Electron Microscopy ◽  
Reduction Process ◽  
Particle Morphology ◽  
Zeolite Catalysts ◽  
X Ray Diffraction ◽  
Y Zeolite ◽  
X Ray ◽  
Irregular Particle ◽  
Transmission Electron ◽  
Pure Metals

Abstract The properties of three types of CoMo/USY catalysts with different synthesized methods have been studied. The sequential and co-impregnation methods followed by activation using calcination and reduction process have been conducted. The properties of the catalysts were examined using Fourier-transform-infrared (FTIR) spectroscopy, X-ray diffraction (XRD) with refinement, and surface area analyzer (SAA). The FTIR spectrum study revealed the enhanced intensity of its Bronsted acid site, and the XRD diffractogram pattern verified the composition of pure metals, oxides, and alloys in the catalyst. The SAA demonstrated the mesoporous features of the catalyst. Scanning electron microscopy showed an irregular particle morphology. Additional analysis using the transmission electron microscopy indicated that the metal has successfully impregnated without damaging the USY structure.

Sign in / Sign up

Export Citation Format

Share Document