scholarly journals Accurate indoor positioning system based on modify nearest point technique

2022 ◽  
Vol 12 (2) ◽  
pp. 1593
Author(s):  
Omar Ibrahim Mustafa ◽  
Hawraa Lateef Joey ◽  
Noor Abd AlSalam ◽  
Ibrahim Zeghaiton Chaloob
Keyword(s):  
Indoor Localization ◽  
Signal Strength ◽  
Real Data ◽  
Reference Points ◽  
Positioning System ◽  
Indoor Environments ◽  
Nearest Point ◽  
The Impact ◽  
Indoor Positioning System

Wireless fidelity (Wi-Fi) is common technology for indoor environments that use to estimate required distances, to be used for indoor localization. Due to multiple source of noise and interference with other signal, the receive signal strength (RSS) measurements unstable. The impression about targets environments should be available to estimate accurate targets location. The Wi-Fi fingerprint technique is widely implemented to build database matching with real data, but the challenges are the way of collect accurate data to be the reference and the impact of different environments on signals measurements. In this paper, optimum system proposed based on modify nearest point (MNP). To implement the proposal, 78 points measured to be the reference points recorded in each environment around the targets. Also, the case study building is separated to 7 areas, where the segmentation of environments leads to ability of dynamic parameters assignments. Moreover, database based on optimum data collected at each time using 63 samples in each point and the average will be final measurements. Then, the nearest point into specific environment has been determined by compared with at least four points. The results show that the errors of indoor localization were less than (0.102 m).

scholarly journals Leveraging Visual Place Recognition to Improve Indoor Positioning with Limited Availability of WiFi Scans

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3657 ◽  
Author(s):  
Michał R. Nowicki ◽  
Piotr Skrzypczyński
Keyword(s):  
Indoor Localization ◽  
Dead Reckoning ◽  
Indoor Positioning ◽  
Positioning System ◽  
Indoor Environments ◽  
University Campus ◽  
Sources Of Information ◽  
Visual Place Recognition ◽  
Indoor Positioning System

WiFi-based fingerprinting is promising for practical indoor localization with smartphones because this technique provides absolute estimates of the current position, while the WiFi infrastructure is ubiquitous in the majority of indoor environments. However, the application of WiFi fingerprinting for positioning requires pre-surveyed signal maps and is getting more restricted in the recent generation of smartphones due to changes in security policies. Therefore, we sought new sources of information that can be fused into the existing indoor positioning framework, helping users to pinpoint their position, even with a relatively low-quality, sparse WiFi signal map. In this paper, we demonstrate that such information can be derived from the recognition of camera images. We present a way of transforming qualitative information of image similarity into quantitative constraints that are then fused into the graph-based optimization framework for positioning together with typical pedestrian dead reckoning (PDR) and WiFi fingerprinting constraints. Performance of the improved indoor positioning system is evaluated on different user trajectories logged inside an office building at our University campus. The results demonstrate that introducing additional sensing modality into the positioning system makes it possible to increase accuracy and simultaneously reduce the dependence on the quality of the pre-surveyed WiFi map and the WiFi measurements at run-time.

scholarly journals PEOPLE’S PPRESENCE EFFECT ON WLAN-BASED IPS’ ACCURACY

2015 ◽  
Vol 77 (9) ◽  
Author(s):  
Iyad H Alshami ◽  
Noor Azurati Ahmad ◽  
Shamsul Sahibuddin
Keyword(s):  
Low Cost ◽  
Signal Strength ◽  
Access Point ◽  
Received Signal Strength ◽  
Positioning System ◽  
Indoor Environments ◽  
Received Signal Strength Indicator ◽  
Indoor Positioning System ◽  
Closed Environment ◽  
Presence Of People

In order to enable Location Based Service (LBS) closed environment, many technologies have been investigated to replace the Global Positioning System (GPS) in the localization process in indoor environments. WLAN is considered as the most suitable and powerful technology for Indoor Positioning System (IPS) due to its widespread coverage and low cost. Although WLAN Received Signal Strength Indicator (RSS) fingerprinting can be considered as the most accurate IPS method, this accuracy can be weakened due to WLAN RSS fluctuation. WLAN RSS fluctuates due to the multipath being influenced by obstacles presence. People presence under WLAN coverage can be considered as one of the main obstacles which can affect the WLAN-IPS accuracy. This research presents experimental results demonstrating that people’s presence between access point (AP) and mobile device (MD) reduces the received signal strength by -2dBm to -5dBm. This reduction in RSS can lead to distance error greater than or equal to 2m. Hence, any accurate IPS must consider the presence of people in the indoor environment. 

scholarly journals A three-dimensional pattern recognition localization system based on a Bayesian graphical model

2020 ◽  
Vol 16 (9) ◽  
pp. 155014771988489 ◽  
Author(s):  
Abdulraqeb Alhammadi ◽  
Fazirulhisyam Hashim ◽  
Mohd. Fadlee A Rasid ◽  
Saddam Alraih
Keyword(s):  
Graphical Model ◽  
Indoor Localization ◽  
Three Dimensional ◽  
Signal Strength ◽  
Local Area ◽  
Received Signal Strength ◽  
Reference Points ◽  
Indoor Environments ◽  
Localization System ◽  
Proposed Model

Access points in wireless local area networks are deployed in many indoor environments. Device-free wireless localization systems based on available received signal strength indicators have gained considerable attention recently because they can localize the people using commercial off-the-shelf equipment. Majority of localization algorithms consider two-dimensional models that cause low positioning accuracy. Although three-dimensional localization models are available, they possess high computational and localization errors, given their use of numerous reference points. In this work, we propose a three-dimensional indoor localization system based on a Bayesian graphical model. The proposed model has been tested through experiments based on fingerprinting technique which collects received signal strength indicators from each access point in an offline training phase and then estimates the user location in an online localization phase. Results indicate that the proposed model achieves a high localization accuracy of more than 25% using reference points fewer than that of benchmarked algorithms.

scholarly journals Localisation of Inspection Probes in A Storage Tank

2021 ◽  
Vol 1 (2) ◽  
pp. 101-112
Author(s):  
Nurmi Elisya Rosli ◽  
Ali Sophian ◽  
Arselan Ashraf
Keyword(s):  
Storage Tank ◽  
Ieee 802.15.4 ◽  
Indoor Localization ◽  
Signal Strength ◽  
Positioning System ◽  
Wireless Technology ◽  
Received Signal Strength Indicator ◽  
Application System ◽  
Wireless Communication Protocols ◽  
Indoor Positioning System

Indoor Positioning System (IPS) has been widely used in today’s industry for the various purposes of locating people or objects such as inspection, navigation, and security. Many research works have been done to develop the system by using wireless technology such as Bluetooth and Wi-Fi. The techniques that can give some better performances in terms of accuracy have been investigated and developed. In this paper, ZigBee IEEE 802.15.4 wireless communication protocols are used to implement an indoor localization application system. The research is focusing more on analyzing the behaviour of Received Signal Strength Indicator (RSSI) reading under several conditions and locations by applying the Trilateration algorithm for localizing. The conditions are increasing the number of transmitters, experimented in the non-wireless connection room and wireless connection room by comparing the variation of RSSI values. Analysis of the result shows that the accuracy of the system was improved as the number of transmitters was increased.

scholarly journals Indoor positioning system for movement path analysis in healthcare institutions

2017 ◽  
Vol 9 (2-3) ◽  
pp. 112 ◽  
Author(s):  
Stefan Grönroos ◽  
Laura-Maria Peltonen ◽  
Valentin Soloviev ◽  
Johan Lilius ◽  
Sanna Salanterä
Keyword(s):  
Low Cost ◽  
Hospital Setting ◽  
Signal Strength ◽  
Indoor Positioning ◽  
Positioning System ◽  
Fitness For Purpose ◽  
Short Term ◽  
Design And Implementation ◽  
The Impact ◽  
Indoor Positioning System

In this paper, we describe an indoor positioning system designed to provide data on the movement patterns of hospital personnel. The data collection is ongoing and part of a larger study project, which aims to evaluate the impact of an information system implemented in a hospital setting. The indoor positioning system was designed to be non-intrusive and straightforward to deploy in multiple hospitals, while requiring minimal existing infrastructure. To this end, the system is based on battery-powered Bluetooth beacons, and mobile phones measuring the signal strength of the beacons to position their bearers. This paper describes the design and implementation of the system. We analyze the positioning accuracy of the system in order to evaluate its fitness for purpose. Based on the results, the system is suitable for short-term deployments due to its low cost and ease of installation.  

scholarly journals Trilateration Method For Estimating Location in RSSI-Based Indoor Positioning System Using Zigbee Protocol

2020 ◽  
Vol 12 (1) ◽  
Author(s):  
Herryawan Pujiharsono ◽  
Duwi Utami ◽  
Rafina Destiarti Ainul
Keyword(s):  
Path Loss ◽  
Signal Strength ◽  
Indoor Positioning ◽  
Positioning System ◽  
Observation Area ◽  
Current Location ◽  
Zigbee Protocol ◽  
The Mean ◽  
Unknown Node ◽  
Indoor Positioning System

Wireless network technology that is used today is developing rapidly because of the increasing need for location information of an object with high accuracy. Global Positioning System (GPS) is a technology to estimate the current location. Unfortunately, GPS has a disadvantage of low accuracy of 10 meters when used indoors. Therefore, it began to be developed with the concept of an indoor positioning system. This is a technology used to estimate the location of objects in a building by utilizing WSN (Wireless Sensor Network). The purpose of this study is to estimate the location of the unknown nodes in the lecturer room as an object and obtain the accuracy of the system being tested. The positioning process is based on the received signal strength (RSSI) on the unknown node using the ZigBee module. The trilateration method is used to estimate unknown node located at the observation area based on the signal strength received at the time of testing. The result shows that the path loss coefficient value at the observation area is 0.9836 and the Mean Square Error of the test is 1.251 meters, which indicates that the system can be a solution to the indoor GPS problem.

scholarly journals Indoor Localization System Using Wireless Sensor Network

2018 ◽  
pp. 29-38
Keyword(s):  
Indoor Localization ◽  
Low Cost ◽  
Wide Band ◽  
Human Movement ◽  
Indoor Positioning ◽  
Positioning System ◽  
Wireless System ◽  
Anchor Nodes ◽  
Indoor Positioning System ◽  
Better Than

Building a precise low cost indoor positioning and navigation wireless system is a challenging task. The accuracy and cost should be taken together into account. Especially, when we need a system to be built in a harsh environment. In recent years, several researches have been implemented to build different indoor positioning system (IPS) types for human movement using wireless commercial sensors. The aim of this paper is to prove that it is not always the case that having a larger number of anchor nodes will increase the accuracy. Two and three anchor nodes of ultra-wide band with or without the commercial devices (DW 1000) could be implemented in this work to find the Localization of objects in different indoor positioning system, for which the results showed that sometimes three anchor nodes are better than two and vice versa. It depends on how to install the anchor nodes in an appropriate scenario that may allow utilizing a smaller number of anchors while maintaining the required accuracy and cost.

scholarly journals Practical Fingerprinting Localization for Indoor Positioning System by Using Beacons

2017 ◽  
Vol 2017 ◽  
pp. 1-16 ◽  
Author(s):  
Santosh Subedi ◽  
Jae-Young Pyun
Keyword(s):  
Estimation Error ◽  
Indoor Positioning ◽  
Location Estimation ◽  
Reference Points ◽  
Ultra Wideband ◽  
Positioning System ◽  
Localization Method ◽  
Weighted Centroid Localization ◽  
Time Required ◽  
Indoor Positioning System

Recent developments in the fields of smartphones and wireless communication technologies such as beacons, Wi-Fi, and ultra-wideband have made it possible to realize indoor positioning system (IPS) with a few meters of accuracy. In this paper, an improvement over traditional fingerprinting localization is proposed by combining it with weighted centroid localization (WCL). The proposed localization method reduces the total number of fingerprint reference points over the localization space, thus minimizing both the time required for reading radio frequency signals and the number of reference points needed during the fingerprinting learning process, which eventually makes the process less time-consuming. The proposed positioning has two major steps of operation. In the first step, we have realized fingerprinting that utilizes lightly populated reference points (RPs) and WCL individually. Using the location estimated at the first step, WCL is run again for the final location estimation. The proposed localization technique reduces the number of required fingerprint RPs by more than 40% compared to normal fingerprinting localization method with a similar localization estimation error.

scholarly journals Mobile Robot Indoor Positioning System Based on K-ELM

2019 ◽  
Vol 2019 ◽  
pp. 1-11 ◽  
Author(s):  
Haixia Wang ◽  
Junliang Li ◽  
Wei Cui ◽  
Xiao Lu ◽  
Zhiguo Zhang ◽  
...  
Keyword(s):  
Mobile Robot ◽  
Indoor Localization ◽  
Indoor Positioning ◽  
Positioning System ◽  
Positioning Accuracy ◽  
Positioning Method ◽  
Kernel Extreme Learning Machine ◽  
Learning Machine ◽  
Positioning Algorithm ◽  
Indoor Positioning System

Mobile Robot Indoor Positioning System has wide application in the industry and home automation field. Unfortunately, existing mobile robot indoor positioning methods often suffer from poor positioning accuracy, system instability, and need for extra installation efforts. In this paper, we propose a novel positioning system which applies the centralized positioning method into the mobile robot, in which real-time positioning is achieved via interactions between ARM and computer. We apply the Kernel extreme learning machine (K-ELM) algorithm as our positioning algorithm after comparing four different algorithms in simulation experiments. Real-world indoor localization experiments are conducted, and the results demonstrate that the proposed system can not only improve positioning accuracy but also greatly reduce the installation efforts since our system solely relies on Wi-Fi devices.

Sign in / Sign up

Export Citation Format

Share Document