A flexible, lightweight and stretchable all-solid-state supercapacitor based on warp-knitted stainless-steel mesh for wearable electronics

2022 ◽  
pp. 004051752110698
Author(s):  
Chuanli Su ◽  
Guangwei Shao ◽  
Qinghua Yu ◽  
Yaoli Huang ◽  
Jinhua Jiang ◽  
...  
Keyword(s):  
Stainless Steel ◽  
High Performance ◽  
Light Emitting Diode ◽  
Low Cost ◽  
Three Dimensional ◽  
Rate Capability ◽  
Cycling Stability ◽  
Wearable Electronics ◽  
Light Emitting ◽  
Dimensional Network

Highly conductive, flexible, stretchable and lightweight electrode substrates are essential to meet the future demand on supercapacitors for wearable electronics. However, it is difficult to achieve the above characteristics simultaneously. In this study, ultrafine stainless-steel fibers (with a diameter of ≈30 μm) are knitted into stainless-steel meshes (SSMs) with a diamond structure for the fabrication of textile stretchable electrodes and current collectors. The electrodes are fabricated by utilizing an electrodeposited three-dimensional network graphene framework and poly(3,4-ethylenedioxythiophene) (PEDOT) coating on the SSM substrates via a two-step electrodeposition process, which show a specific capacitance of 77.09 F g−1 (0.14 A g−1) and superb cycling stability (91% capacitance retention after 5000 cycles). Furthermore, the assembled flexible stretchable supercapacitor based on the PEDOT/reduced graphene oxide (RGO)@SSM electrodes exhibits an areal capacitance (53 mF cm−2 at 0.1 mA cm−2), a good cycling stability (≈73% capacitance retention after 5000 cycles), rate capability (36 mF cm−2 at 5 mA cm−2), stretchable stability (≈78% capacitance retention at 10% strain for 500 stretching cycles) and outstanding flexibility and stability under various bending deformations. The assembled supercapacitors can illuminate a thermometer and a light-emitting diode, demonstrating their potential application as stretchable supercapacitors. This simple and low-cost method developed for fabricating lightweight, stretchable and stable high-performance supercapacitors offers new opportunities for future stretchable electronic devices.

Three-Dimensional MoS2/Graphene Hybrid Aerogel as Free-Standing, High-Performance Electrode for Supercapacitor

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050062
Author(s):  
Zhaolei Meng ◽  
Xiaojian He ◽  
Song Han ◽  
Zijian Hu
Keyword(s):  
Porous Structure ◽  
Surface Area ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Hydrothermal Process ◽  
Three Dimensional ◽  
Rate Capability ◽  
Free Standing ◽  
Hybrid Aerogel

Carbon materials are generally employed as supercapacitor electrodes due to their low- cost, high-chemical stability and environmental friendliness. However, the design of carbon structures with large surface area and controllable porous structure remains a daunt challenge. In this work, a three-dimensional (3D) hybrid aerogel with different contents of MoS2 nanosheets in 3D graphene aerogel (MoS2-GA) was synthesized through a facial hydrothermal process. The influences of MoS2 content on microstructure and subsequently on electrochemical properties of MoS2-GA are systematically investigated and an optimized mass ratio with MoS2: GA of 1:2 is chosen to achieve high mechanical robustness and outstanding electrochemical performance in the hybrid structure. Due to the large specific surface area, porous structure and continuous charge transfer network, such MoS2-GA electrodes exhibit high specific capacitance, good rate capability and excellent cyclic stability, showing great potential in large-scale and low-cost fabrication of high-performance supercapacitors.

Facile synthesis of porous CoFe2O4 nanosheets for lithium-ion battery anodes with enhanced rate capability and cycling stability

RSC Advances ◽  
2014 ◽  
Vol 4 (52) ◽  
pp. 27488-27492 ◽  
Author(s):  
Xiayin Yao ◽  
Junhua Kong ◽  
Xiaosheng Tang ◽  
Dan Zhou ◽  
Chenyang Zhao ◽  
...  
Keyword(s):  
Lithium Ion Batteries ◽  
Lithium Ion Battery ◽  
Anode Materials ◽  
High Performance ◽  
Low Cost ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycling Stability ◽  
Facile Synthesis

Porous CoFe2O4 nanosheets are prepared via a low-cost and scalable process and are shown to be high-performance anode materials for lithium-ion batteries.

scholarly journals Nano-MnO2 Decoration of TiO2 Microparticles to Promote Gaseous Ethanol Visible Photoremoval

Nanomaterials ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 686 ◽  
Author(s):  
Marta Stucchi ◽  
Daria Boffito ◽  
Eleonora Pargoletti ◽  
Giuseppina Cerrato ◽  
Claudia Bianchi ◽  
...  
Keyword(s):  
Visible Light ◽  
High Performance ◽  
Noble Metals ◽  
Large Scale ◽  
Light Emitting Diode ◽  
Low Cost ◽  
Light Emitting ◽  
Physico Chemical ◽  
Visible Light Active ◽  
Activity Screening

TiO2-based photocatalysis under visible light is an attractive way to abate air pollutants. Moreover, developing photocatalytic materials on a large-scale requires safe and low-cost precursors. Both high-performance TiO2 nanopowders and visible-light active noble metals do not match these requirements. Here, we report the design of novel Mn-decorated micrometric TiO2 particles. Pigmentary TiO2 replaced unsafe nano-TiO2 and firmly supported MnOx particles. Mn replaced noble metals such as Au or Ag, opening the way for the development of lower cost catalysts. Varying Mn loading or pH during the impregnation affected the final activity, thus giving important information to optimize the synthesis. Photocatalytic activity screening occurred on the gas-phase degradation of ethanol as a reference molecule, both under ultraviolet (UV) (6 h) and Light Emitting Diode (LED) (24 h) irradiation. Mn-doped TiO2 reached a maximum ethanol degradation of 35% under visible light after 24 h for the sample containing 20% of Mn. Also, we found that an acidic pH increased both ethanol degradation and mineralization to CO2, while an alkaline pH drastically slowed down the reaction. A strict correlation between photocatalytic results and physico-chemical characterizations of the synthesized powders were drawn.

scholarly journals Direct coherent multi-ink printing of fabric supercapacitors

2021 ◽  
Vol 7 (3) ◽  
pp. eabd6978 ◽  
Author(s):  
Jingxin Zhao ◽  
Hongyu Lu ◽  
Yan Zhang ◽  
Shixiong Yu ◽  
Oleksandr I. Malyi ◽  
...  
Keyword(s):  
System Integration ◽  
High Performance ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
High Mass ◽  
Wearable Electronics ◽  
Energy Storage Devices ◽  
Fabrication Procedure ◽  
Self Powered ◽  
Mechanical Devices

Coaxial fiber-shaped supercapacitors with short charge carrier diffusion paths are highly desirable as high-performance energy storage devices for wearable electronics. However, the traditional approaches based on the multistep fabrication processes for constructing the fiber-shaped energy device still encounter persistent restrictions in fabrication procedure, scalability, and mechanical durability. To overcome this critical challenge, an all-in-one coaxial fiber-shaped asymmetric supercapacitor (FASC) device is realized by a direct coherent multi-ink writing three-dimensional printing technology via designing the internal structure of the coaxial needles and regulating the rheological property and the feed rates of the multi-ink. Benefitting from the compact coaxial structure, the FASC device delivers a superior areal energy/power density at a high mass loading, and outstanding mechanical stability. As a conceptual exhibition for system integration, the FASC device is integrated with mechanical units and pressure sensor to realize high-performance self-powered mechanical devices and monitoring systems, respectively.

scholarly journals Carbon nanomaterial hybrids via laser writing for high-performance non-enzymatic electrochemical sensors: a critical review

2021 ◽  
Author(s):  
Marcel Simsek ◽  
Nongnoot Wongkaew
Keyword(s):  
Noble Metal ◽  
Critical Review ◽  
High Performance ◽  
Carbon Nanomaterials ◽  
Electrochemical Sensors ◽  
Low Cost ◽  
Three Dimensional ◽  
Laser Writing ◽  
Enzyme Mimicking ◽  
Natural Enzyme

AbstractNon-enzymatic electrochemical sensors possess superior stability and affordability in comparison to natural enzyme-based counterparts. A large variety of nanomaterials have been introduced as enzyme mimicking with appreciable sensitivity and detection limit for various analytes of which glucose and H2O2 have been mostly investigated. The nanomaterials made from noble metal, non-noble metal, and metal composites, as well as carbon and their derivatives in various architectures, have been extensively proposed over the past years. Three-dimensional (3D) transducers especially realized from the hybrids of carbon nanomaterials either with metal-based nanocatalysts or heteroatom dopants are favorable owing to low cost, good electrical conductivity, and stability. In this critical review, we evaluate the current strategies to create such nanomaterials to serve as non-enzymatic transducers. Laser writing has emerged as a powerful tool for the next generation of devices owing to their low cost and resultant remarkable performance that are highly attractive to non-enzymatic transducers. So far, only few works have been reported, but in the coming years, more and more research on this topic is foreseeable. Graphical abstract

scholarly journals Enhanced catalytic ozonation of ibuprofen using a 3D structured catalyst with MnO2 nanosheets on carbon microfibers

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Guhankumar Ponnusamy ◽  
Hajar Farzaneh ◽  
Yongfeng Tong ◽  
Jenny Lawler ◽  
Zhaoyang Liu ◽  
...  
Keyword(s):  
Removal Efficiency ◽  
Active Sites ◽  
Low Cost ◽  
Three Dimensional ◽  
Industrial Applications ◽  
Catalytic Ozonation ◽  
Heterogeneous Catalytic ◽  
Structured Catalyst ◽  
Dimensional Network ◽  
Carbon Microfibers

AbstractHeterogeneous catalytic ozonation is an effective approach to degrade refractory organic pollutants in water. However, ozonation catalysts with combined merits of high activity, good reusability and low cost for practical industrial applications are still rare. This study aims to develop an efficient, stable and economic ozonation catalyst for the degradation of Ibuprofen, a pharmaceutical compound frequently detected as a refractory pollutant in treated wastewaters. The novel three-dimensional network-structured catalyst, comprising of δ-MnO2 nanosheets grown on woven carbon microfibers (MnO2 nanosheets/carbon microfiber), was synthesized via a facile hydrothermal approach. Catalytic ozonation performance of Ibuprofen removal in water using the new catalyst proves a significant enhancement, where Ibuprofen removal efficiency of close to 90% was achieved with a catalyst loading of 1% (w/v). In contrast, conventional ozonation was only able to achieve 65% removal efficiency under the same operating condition. The enhanced performance with the new catalyst could be attributed to its significantly increased available surface active sites and improved mass transfer of reaction media, as a result of the special surface and structure properties of this new three-dimensional network-structured catalyst. Moreover, the new catalyst displays excellent stability and reusability for ibuprofen degradation over successive reaction cycles. The facile synthesis method and low-cost materials render the new catalyst high potential for industrial scaling up. With the combined advantages of high efficiency, high stability, and low cost, this study sheds new light for industrial applications of ozonation catalysts.

Sign in / Sign up

Export Citation Format

Share Document