Design and Evaluation of K-Pass: A Bicycle-Friendly Modification of Speed Bumps

Author(s):  
Vinod Vasudevan ◽  
Aniruddha Rajurkar ◽  
Rahul Soni ◽  
Akhil Tiwari

Traffic safety is a major concern across the world. Since speed is a major cause of traffic crashes, various traffic calming measures are used to enhance the safety of the road users in urban areas. Speed humps and bumps are the most widely used traffic calming devices. As a considerable number of bicyclists use the road along with motorized users, it is important to consider them while deploying any traffic calming devices. Studies have shown that bicyclists experience significantly larger discomfort as compared to motorized vehicles while passing over speed humps. In this study, a modification has been proposed to enhance riding comfort of bicyclists without compromising the traffic calming attribute of a speed bump. This modification is named “K-pass.” Analysis of data collected before and after the modification justifies the effectiveness in reducing the discomfort of bicyclists. Over a period of eight months, 70% of the bicyclists chose to use K-pass. Data also revealed that a high proportion of motorized two-wheeler users also used the K-pass at reduced speeds. It is expected that the K-pass will be a useful modification to the existing speed humps and speed bumps in areas where bicycle usage is expected.

2018 ◽  
Vol 4 (6) ◽  
pp. 1206 ◽  
Author(s):  
Sayed Shwaly ◽  
Amal AL-Ayaat ◽  
Mohamed Hamed Zakaria

In Egypt, it is believed that speed humps are the cheapest and best solutions to reduce vehicles speed and thus reduce the number of potential accidents. Due to the lack of specifications in Egypt that govern the installation of speed humps, they were spread randomly and with different dimensions without adequate studies. Consequently, this practice can cause adverse effects on the road users and the surrounding environment. For this purpose, a questionnaire was designed to discuss the different effects of using speed humps in Kafr El-Sheikh city as a typical model in the Egyptian cities. To verify that the questionnaire is appropriate for the intended task, it was evaluated by 30 respondents aged 18 years and over. After the trial process, the required corrections were made to the proposed form of the questionnaire. Then, final questionnaires were distributed and 1000 responses were collected from all road users, whether they were pedestrians, drivers, owners of vehicles or vehicle repairmen by using face-to-face interviews. The responses were analysed using SPSS program. The results reflected that the installation of speed humps contributed greatly to reduce vehicles speed, the flow of traffic and accidents rate. On the other hand, the results proved that humps also contribute significantly to the environmental pollution, damage to the pavement and vehicles especially when they are poorly designed and located. The majority of respondents attributed the random spread of the speed humps to the weakness of the authorities in law enforcement and the prevention of the installation of new humps without authorization. Finally, with the widespread use of speed humps and with the exception of the positive impact on traffic safety, it also has negative impacts on both the economy and the environment. Finally, the use of speed humps can cause many harmful effects to the neighbourhood, if there no strict control on its installation process. Unless specifications and some standards should be strictly followed, other means of traffic calming measures should be considered.


Author(s):  
Hernán Gonzalo Orden

In recent years the number of deaths and serious injuries is decreasing in Spain, but, although the reduction outside the cities has been very strong, inside the urban areas, it has been smaller. This is especially hard if you look at the most vulnerable road users such as pedestrians and cyclists. In many accidents the speed factor appears closely linked not only to the number, but also to the severity of the accidents suffered inside the urban areas. Therefore, a reduction in the speed would improve the road safety. There are different measures known as "traffic calming measures" whose objectives are to reduce both the number and severity of accidents that occur on urban areas, by reducing the traffic flow through the streets, as well as the speed of the vehicles. However, the efficiency in speed reduction of each measure is not entirely known. That's the reason why they are implanted, in many cases, with no technical basis. The aim of this article is to show the effectiveness in reducing speed of some of the traffic calming measures. To this effect, field measurements were done on street sections with different types of traffic calming measures, in different places of a city of Burgos, in the north of Spain. These measurements were compared with other ones sited on other streets sections of similar characteristics but without traffic calming measures. Finally the conclusions are shown and some recommendations for improving their effectiveness are given.DOI: http://dx.doi.org/10.4995/CIT2016.2016.4217


2021 ◽  
Vol 72 (12) ◽  
pp. 1131-1143

Increasing numbers of people living in urban areas are being exposed to harmful action of environmental noise, which severely affects their health and quality of life. The predominant source of environmental noise in such areas is road traffic, and a frequently used measure to curb down this noise involves reduction of driving speed. The influence of vertical traffic calming devices, normally used to improve traffic safety, on the degree of noise reduction, is analysed in this study. The analysis was carried out on seven urban two-lane two-way roads, on which various types of speed bumps and speed humps are installed.


2017 ◽  
Vol 29 (3) ◽  
pp. 275-285 ◽  
Author(s):  
Audrius Vaitkus ◽  
Donatas Čygas ◽  
Vilma Jasiūnienė ◽  
Laura Jateikienė ◽  
Tadas Andriejauskas ◽  
...  

Road accidents are one of the leading causes of death in the world, particularly among young people. Excessive speed is one of the main risk factors in road traffic safety, increasing accident probability and affecting accident severity. Experimental research of the traffic calming measures allocation effect on the driving speed is presented in this paper. The research has been carried out on two aspects. The first one with respect to the mean speed and the second one regarding instantaneous speed. However, the paper is not only restricted by the above research. Standardized survey interview and questioning, a survey of public opinion, was carried out to find out the road users’ opinions about the need for traffic calming measures and speed control measures. Finally, the authors presented their insights and recommendations for the installation of speed humps and gateways and their optimum spacing.


Author(s):  
Ghazwan Al-Haji ◽  

Cycling is a sustainable transport mode, especially in urban areas for short distances. Electric bikes and electric scooters are increasingly emerging into traffic network in cities in Sweden due to advantages related to accessibility, environment, etc. However, they bring questions in terms of traffic risk and accidents. The road infrastructure must be adapted to accommodate the increasing share of these new types of bikes in traffic. The study will assess both bikes and e-bikes safety according to exposure, risk and consequences. The study will review relevant literature on Traffic Calming Measures (TCMs). It will develop a conceptual framework to determine the impact of different TCMs (horizontal and vertical) on traffic safety for both traditional and e-bikes safety. Accident data from the Swedish Traffic Accident Data Acquisition (STRADA) will be collected and analysed in order to identify roundabouts (as a chosen type of TCMs) with high accidents rates for cyclists in Norrkoping city in Sweden.


Author(s):  
Tomislav Petrović ◽  
Miloš Milosavljević ◽  
Milan Božović ◽  
Danislav Drašković ◽  
Milija Radović

The application of intelligent transport systems (hereinafter ITSs) on roads enables continuous monitoring of road users during a whole year with the aim to collect good-quality data based on which the more complex analyses could be done, such as monitoring of certain traffic safety indicators. Automatic traffic counters are one of the most commonly implemented ITSs for collecting traffic flow parameters that are relevant for traffic management on state roads in Republic of Serbia. This paper presents one of the possible ways to collect, analyze and present data on road users’ speeds using automatic traffic counters, where certain traffic safety indicators are analyzed in terms of road users’ compliance with the speed limit on the road section from Mali Pozarevac to Kragujevac. Based on the analyses of data downloaded from automatic traffic counters, it is observed that an extremely high percentage of vehicles drive at speed higher than the speed limit, indicating clearly to higher traffic accident risk, as well as to the need for a tendency to implement speed management on roads using ITS in the forthcoming period.


2021 ◽  
Vol 67 (4) ◽  
pp. 1-8
Author(s):  
Jacob Adedayo Adedeji ◽  
Xoliswa Feikie

Road traffic fatality is rated as one of the ten causes of death in the world and with various preventive measures on a global level, this prediction is only placed on flat terrain and didn’t reduce. Nevertheless, road users’ communication is an essential key to traffic safety. This communication, be it formal or informal between the road users is an important factor for smooth traffic flow and safety. Communication language on roads can be categorized into; formal device-based signal (formal signal), formal hand signal (formal signal), informal device-based signal (informal signal), and informal gesture-based signal (everyday signal). However, if the intent of the message conveys is not properly understood by the other road user, mistakes and errors may set in. Overall, the formal signal is based on explicit learning which occurs during the driving training and the license testing process and the informal, implicit learning occur during the actual driving process on the road unintentionally. Furthermore, since the informal signal is not a prerequisite to driving or taught in driving schools, novice drivers are clueless and thus, might have contributed to errors and mistakes which leads to traffic fatalities. Therefore, this study seeks to document the informal means of communication between drivers on South African roads. Consequently, a qualitative semi-structured interview questionnaire would be used in the collection of informal signals, which were predominantly used on South African roads from driving instructors and thereafter, a focus group of passengers’ car, commercial and truck drivers will be used to validate the availability and their understanding of these informal signals using a Likert-type scale for the confidence level. In conclusion, the information gathered from this study will help improve road safety and understanding of road users especially drivers on the necessity of communication and possible adaptation for other developing countries.


Symmetry ◽  
2019 ◽  
Vol 11 (4) ◽  
pp. 597
Author(s):  
Alicja Sołowczuk ◽  
Dominik Kacprzak

Traffic calming, as a traffic engineering discipline, is becoming an increasingly important aspect of the road engineering process. One of the traffic calming treatments are pedestrian refuges—raised islands located on or at the road centreline. This paper presents factors relevant to the performance of this kind of traffic calming devices retrofitted on the stretches of regional roads in village areas. To this end, speed surveys were carried out before and after the islands in each direction on purposefully chosen test sections. In order to identify the determinants, each test section was characterised by features including the symmetry of the road layout geometry, surrounding features and the existing traffic signs and, last but not least, visibility of the road ahead. The survey data were used by the authors to perform analyses in order to group the speeds at the pedestrian refuges and relate them to specific factors and, finally, identify the determinants of speed reduction. In this way, the authors arrived at a conclusion that the performance of pedestrian refuges depends on a number of factors rather than solely on their geometric parameters. The analyses showed that the pedestrian refuge geometric parameters, features located in its proximity that influence the driver’s perception and placement of appropriate marking, can, in combination, result in achieving the desired speed reduction and ensure safety of non-motorised users. These hypotheses were tested on a stretch of a regional road in village area at three points of the process: before upgrading, after installation of pedestrian refuges, and after retrofitting of enhancements.


Author(s):  
Tapan K. Datta ◽  
David Feber ◽  
Kerrie Schattler ◽  
Sue Datta

A vast majority of traffic crashes in urban areas occur at signalized intersections. Roadway geometry, traffic control, adjacent land uses, and environmental factors at intersections often contribute to the high incidence of traffic crashes and injuries. A public-private partnership project to identify high-crash and high-risk locations in the city of Detroit was initiated in 1996. Eighteen candidate sites were selected, and an extensive engineering study was conducted to develop countermeasures to help alleviate the traffic crash problem at the selected sites. The Automobile Association of America, Michigan, was the private partner in this joint venture and, in partnership with the city of Detroit, was a major contributor to covering the cost of improvements. The selection of countermeasures was based on state-of-the-art methodology and analysis, and implementation of the selected countermeasures at some of the sites was undertaken as the initial phase of the project. A comprehensive before-and-after evaluation study was performed at three of the improved sites. The study revealed that the safety improvements that were implemented lowered both crash and severity experience. The differences between the before and after crash frequencies proved to be statistically significant. Additionally, a benefit-cost analysis at the study locations indicated extraordinary results. This research presents the evaluation study results and discusses the countermeasures and improvements that were the most successful in mitigating traffic crash problems at the selected study locations.


2014 ◽  
Vol 931-932 ◽  
pp. 536-540 ◽  
Author(s):  
Wichuda Satiennam ◽  
Thaned Satiennam ◽  
Pornsiri Urapa ◽  
Tussawan Phacharoen

In developed countries, the use of speed humps and bumps have evolved from extensive research and testing which been properly designed and standardized. On the contrary in developing countries, no systematic and scientific studies have been carried out on that environment, especially the study on the effects that the motorcyclists response to the humps and bumps. This study therefore reveals the riders behavior when negotiating their speed to the devices. A case study was conducted in the provincial cities of Thailand where the motorcycle was a major mode of transportation. Six locations with speed humps and bumps were selected. Vehicles passing times were simultaneously recorded at 12 points along each traffic calmed link. From these data, a speed profile for each individual vehicle and for a link could be derived. It is found that speed humps and bumps have critically different impacts on motorcycle rider and passenger car driver. The smaller size speed bumps could effectively control the rider speed but have diverse impacts on the driver. These speed differences could post more safety deficiency to the site. The effect of the device on riders behavior, however, is restricted to a short spatial range (about 20-30 m before and after the device). For the speed humps, the motorcycle speeds are quite varied depending mainly on the road terrain. It is found that the motorcyclists have significant lower acceleration rate on the upgrade terrain when compared to the passenger car. Therefore, it is important to take all these rider characteristics into considerations when design the road humps to control vehicle speed in the developing countries.


Sign in / Sign up

Export Citation Format

Share Document