Investigating barotrauma in juvenile salmon passing through a very low head turbine using response surface methodology

2021 ◽  
pp. 095440622110504
Author(s):  
Mehrshad Foroughan ◽  
Alireza Riasi ◽  
Amir Bahreini
Keyword(s):  
Chinook Salmon ◽  
Cfd Simulation ◽  
Geometrical Parameters ◽  
Innovative Design ◽  
Computational Costs ◽  
Water Turbine ◽  
Low Head ◽  
Computational Fluid Dynamics Cfd ◽  
Biological Performance ◽  
Riverine Fish

Although hydropower is a clean source of energy, in some cases, it can jeopardize the life of some species of riverine fish. Very Low Head (VLH) water turbine is an innovative design that aims at reducing the adverse effects of such hydroelectric facilities. In this research, two methodologies are integrated to investigate barotrauma in juvenile salmons passing through this particular turbine. First, to quantify barotrauma, we implement a method known as BioPA (Biological Performance Assessment) by combining the results of some laboratory experiments on juvenile Chinook salmon moving through a simulated turbine passage with the Computational Fluid Dynamics (CFD) simulation of the flow field in this environment. In the second part, we added surrogate-based modeling as a tool, which enabled us to study the effects of two geometrical parameters on the environmental performance of the VLH turbine with low computational costs. The results indicate a significant dependency between the installation angle of the VLH turbine and the severity of the barotrauma of this particular fish. In addition, further investigations suggest that the region near the middle of blades is the safest for fish in the case of decompression.

Optimization, Numerical, and Experimental Study of a Propeller Pump as Turbine

2014 ◽  
Vol 136 (1) ◽  
Author(s):  
Shahram Derakhshan ◽  
Nemat Kasaeian
Keyword(s):  
Energy Production ◽  
Cfd Simulation ◽  
Control Volume ◽  
Design Parameters ◽  
Axial Pump ◽  
Performance Curves ◽  
Turbine Runner ◽  
Low Head ◽  
Computational Fluid Dynamics Cfd ◽  
Installed Capacity

Micro hydropower station is one of the clean choices for offgrid points with available hydropotential. The challenging in this type of energy production is the high capital cost of the installed capacity that is worse for low-head micro hydropower stations. Turbine price is the main problem for this type of energy production. In this research, a simple machine has been introduced instead of conventional propeller turbines. The key is using an axial pump as a propeller turbine. In the present research, a propeller pump was simulated as a turbine by numerical methods. Computational fluid dynamics (CFD) was adopted in the direct and reverse modes performance prediction of a single propeller pump. To give a more accurate CFD result, all domains within the machine control volume were modeled and hexahedral structured mesh was generated during CFD simulation. Complete performance curves of its pump and turbine modes were acquired. For verification of the numerical results, the machine has been tested in an established test ring. The results showed that a propeller pump could be easily run as a low-head turbine. In the next, the goal was to optimize the geometry of the blades of axial turbine runner which leads to maximum hydraulic efficiency by changing the design parameters of camber line in five sections of a blade. The efficiency of the initial geometry was improved by various objective functions and optimized geometry was obtained by genetic algorithm and artificial neural network to find the best efficiency of the turbine. The results showed that the efficiency is improved by more than 14%. Indeed the geometry has better performance in cavitation.

scholarly journals Computational fluid dynamics (CFD) simulation analysis on retinal gas cover rates using computational eye models

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Makoto Gozawa ◽  
Yoshihiro Takamura ◽  
Tomoe Aoki ◽  
Kentaro Iwasaki ◽  
Masaru Inatani
Keyword(s):  
Cfd Simulation ◽  
Simulation Analysis ◽  
Fluid Dynamic ◽  
Fluid Analysis ◽  
Intraocular Gas ◽  
Pars Plana ◽  
Computational Fluid Dynamics Cfd ◽  
Multiple Breaks ◽  
Gas Volume ◽  
Wall Wettability

AbstractWe investigated the change in the retinal gas cover rates due to intraocular gas volume and positions using computational eye models and demonstrated the appropriate position after pars plana vitrectomy (PPV) with gas tamponade for rhegmatogenous retinal detachments (RRDs). Computational fluid dynamic (CFD) software was used to calculate the retinal wall wettability of a computational pseudophakic eye models using fluid analysis. The model utilized different gas volumes from 10 to 90%, in increments of 10% to the vitreous cavity in the supine, sitting, lateral, prone with closed eyes, and prone positions. Then, the gas cover rates of the retina were measured in each quadrant. When breaks are limited to the inferior retina anterior to the equator or multiple breaks are observed in two or more quadrants anterior to the equator, supine position maintained 100% gas cover rates in all breaks for the longest duration compared with other positions. When breaks are limited to either superior, nasal, or temporal retina, sitting, lower temporal, and lower nasal position were maintained at 100% gas cover rates for the longest duration, respectively. Our results may contribute to better surgical outcomes of RRDs and a reduction in the duration of the postoperative prone position.

scholarly journals Numerical Investigation for the Resin Filling Behavior during Ultraviolet Nanoimprint Lithography of Subwavelength Moth-Eye Nanostructure

Coatings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 799
Author(s):  
Yuanchi Cui ◽  
Xuewen Wang ◽  
Chengpeng Zhang ◽  
Jilai Wang ◽  
Zhenyu Shi
Keyword(s):  
Simulation Model ◽  
Nanoimprint Lithography ◽  
Cfd Simulation ◽  
Boundary Slip ◽  
Accurate Analysis ◽  
Inlet Velocity ◽  
Filling Height ◽  
Proposed Model ◽  
Good Consistency ◽  
Computational Fluid Dynamics Cfd

Accurate analysis of the resin filling process into the mold cavity is necessary for the high-precision fabrication of moth-eye nanostructure using the ultraviolet nanoimprint lithography (UV-NIL) technique. In this research, a computational fluid dynamics (CFD) simulation model was proposed to reveal resin filling behavior, in which the effect of boundary slip was considered. By comparison with the experimental results, a good consistency was found, indicating that the simulation model could be used to analyze the resin filling behavior. Based on the proposed model, the effects of process parameters on resin filling behavior were analyzed, including resin viscosity, inlet velocity and resin thickness. It was found that the inlet velocity showed a more significant effect on filling height than the resin viscosity and thickness. Besides, the effects of boundary conditions on resin filling behavior were investigated, and it was found the boundary slip had a significant influence on resin filling behavior, and excellent filling results were obtained with a larger slip velocity on the mold side. This research could provide guidance for a more comprehensive understanding of the resin filling behavior during UV-NIL of subwavelength moth-eye nanostructure.

scholarly journals Computational Fluid Dynamics (CFD) Simulation on Mixing in T-Shaped Micromixer

2020 ◽  
Vol 932 ◽  
pp. 012006
Author(s):  
S N A Ahmad Termizi ◽  
C Y Khor ◽  
M A M Nawi ◽  
Nurlela Ahmad ◽  
Muhammad Ikman Ishak ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Computational Fluid Dynamics Cfd

Load Characteristics of Steel and Concrete Tubular Members Under Jet Fire: An Experimental and Numerical Study

2010 ◽  
Author(s):  
Jeong Hyo Park ◽  
Bong Ju Kim ◽  
Jung Kwan Seo ◽  
Jae Sung Jeong ◽  
Byung Keun Oh ◽  
...  
Keyword(s):  
Cfd Simulation ◽  
Numerical Study ◽  
Fire Load ◽  
Adiabatic Wall ◽  
Fire Engineering ◽  
Ansys Cfx ◽  
Design Values ◽  
Computational Fluid Dynamics Cfd ◽  
Load Characteristics ◽  
Set Up

The aim of this study was to evaluate the load characteristics of steel and concrete tubular members under jet fire, with the motivation to investigate the jet fire load characteristics in FPSO topsides. This paper is part of Phase II of the joint industry project on explosion and fire engineering of FPSOs (EFEF JIP) [1]. To obtain reliable load values, jet fire tests were carried out in parallel with a numerical study. Computational fluid dynamics (CFD) simulation was used to set up an adiabatic wall boundary condition for the jet fire to model the heat transfer mechanism. A concrete tubular member was tested under the assumption that there is no conduction effect from jet fire. A steel tubular member was tested and considered to transfer heat through conduction, convection, and radiation. The temperature distribution, or heat load, was analyzed at specific locations on each type of member. ANSYS CFX [2] and Kameleon FireEx [3] codes were used to obtain similar fire action in the numerical and experimental methods. The results of this study will provide a useful database to determine design values related to jet fire.

A Study on the Performance of Stratified Air Conditioning Design in Assembly Halls – A Case Study at the Dazhi Cultural Center in Taiwan

2013 ◽  
Vol 368-370 ◽  
pp. 599-602 ◽  
Author(s):  
Ian Hung ◽  
Hsien Te Lin ◽  
Yu Chung Wang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Indoor Air ◽  
Air Conditioning ◽  
Cfd Simulation ◽  
Indoor Temperature ◽  
Cultural Center ◽  
Computational Fluid Dynamics Cfd

This study focuses on the performance of air conditioning design at the Dazhi Cultural Center and uses a computational fluid dynamics (CFD) simulation to discuss the differences in wind velocity and ambient indoor temperature between all-zone air conditioning design and stratified air conditioning design. The results have strong implications for air conditioning design and can improve the indoor air quality of assembly halls.

Research on CFD Simulation of the Cement Slurry Mixer

2012 ◽  
Vol 621 ◽  
pp. 196-199
Author(s):  
Shui Ping LI ◽  
Ya Li Yuan ◽  
Lu Gang Shi
Keyword(s):  
Flow Field ◽  
High Performance ◽  
Cfd Simulation ◽  
Structural Parameters ◽  
Internal Flow ◽  
Simulation Method ◽  
Cement Slurry ◽  
Fluid Machinery ◽  
Computational Fluid Dynamics Cfd ◽  
Machinery Design

Numerical simulation method of the internal flow field of fluid machinery has become an important technology in the study of fluid machinery design. In order to obtain a high-performance cement slurry mixer, computational fluid dynamics (CFD) techniques are used to simulate the flow field in the mixer, and the simulation results are studied. According to the analysis results, the structural parameters of the mixer are modified. The results show the mixer under the revised parameters meet the design requirements well. So CFD analysis method can shorten design period and provide valuable theoretical guidance for the design of fluid machinery.

A Verification and Validation Study of CFD Simulation of Wind-Induced Ventilation on Building with Single-Sided Opening

2014 ◽  
Vol 554 ◽  
pp. 696-700 ◽  
Author(s):  
Nur Farhana Mohamad Kasim ◽  
Sheikh Ahmad Zaki ◽  
Mohamed Sukri Mat Ali ◽  
Ahmad Faiz Mohammad ◽  
Azli Abd Razak
Keyword(s):  
Open Source Software ◽  
Natural Ventilation ◽  
Cfd Simulation ◽  
Previous Experiment ◽  
Experimental Methods ◽  
Verification And Validation ◽  
Navier Stokes ◽  
Navier Stokes Equation ◽  
Computational Fluid Dynamics Cfd ◽  
Model Approach

Wind-induced ventilation is widely acknowledged as one of the best approaches for inducing natural ventilation. Computational fluid dynamics (CFD) technique is gaining popularity among researchers as an alternative for experimental methods to investigate the behavior of wind-driven ventilation in building. In this present paper, Reynolds averaged Navier-Stokes equation (RANS) k-ε model approach is considered to simulate the airflow on a simplified cubic building with an opening on a single façade. Preliminary simulation using models from previous experiment indicates the reliability of OpenFOAM, the open source software that will be used in this study. The results obtained in this study will better define options for our future study which aims to explore how different buildings arrays modify the airflow inside and around a naturally ventilated building.

Sign in / Sign up

Export Citation Format

Share Document