scholarly journals Anatomic Total Shoulder Arthroplasty Using a Self-Pressurizing Pegged Bone-Preserving Cemented Glenoid Component: A 2- to 5-Year Follow-up Study

2018 ◽  
Vol 2 ◽  
pp. 247154921775047
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Loose Body ◽  
Deep Infection ◽  
Glenoid Component ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties ◽  
And Function

Background: High rates of radiographic loosening have been reported with various glenoid designs. Many available designs sacrifice most of the bone at the central portion of the glenoid vault, creating large areas of deficiency when revision becomes necessary. The purpose of this study was to report the 2- to 5-year outcome of shoulder arthroplasty using a bone-preserving all-polyethylene glenoid components with self-pressurizing pegs. Methods: Between August 2011 and December 2014, 202 consecutive anatomic total shoulder arthroplasties (TSAs) were performed by a single surgeon with implantation of a self-pressurizing cemented pegged glenoid component in 190 patients (12 patients had both shoulders replaced). Patients were followed up prospectively and evaluated for pain, motion, strength, American Shoulder and Elbow Surgeons (ASES) scores, and radiographic changes. The mean follow-up time was 2.7 (2–5) years. Results: TSA improved pain and function reliably. At the most recent follow-up, 94% of the shoulders had no or mild pain. Motion included 154 ± 25° of elevation, 68 ± 18° of external rotation, and median internal rotation to T10 (range, iliac crest to T4). The most recent average ASES score was 82 ± 15 points. Early postoperative radiographs showed no radiolucent lines. No humeral or glenoid component was considered radiographically loose at the most recent follow-up. Complications requiring reoperation included subscapularis insufficiency (4), posterior instability (2), deep infection (1), stiffness (1), and a painful loose body (1). No components were revised for loosening. Conclusions: Anatomic TSA using a cemented bone-preserving all-polyethylene pegged self-pressurizing glenoid component provided satisfactory clinical outcomes and survival at 2 to 5 years.

Anatomic versus reverse shoulder arthroplasty: a mid-term follow-up comparison

2020 ◽  
pp. 175857322092115
Author(s):  
Bradley S Schoch ◽  
Joseph J King ◽  
Joseph Zuckerman ◽  
Thomas W Wright ◽  
Chris Roche ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Patient Reported Outcomes ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Reoperation Rate ◽  
Patient Reported ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties

Background Anatomic total shoulder arthroplasty improves pain and function with a reported reoperation rate of approximately 1% per year. With improved glenoid fixation, reverse shoulder arthroplasty implants may outperform anatomic total shoulder arthroplasty. We evaluate the functional outcomes and reoperation rate of anatomic total shoulder arthroplasty versus reverse shoulder arthroplasty at a minimum eight-year follow-up or revision. Methods Between 2005 and 2010, 187 shoulders (137 anatomic total shoulder arthroplasty, 50 reverse shoulder arthroplasty) were retrospectively reviewed at a mean of 8.8 years. The mean age at surgery was 67 years. Females were more commonly treated with reverse shoulder arthroplasty. Both groups had similar body mass index and comorbidities. Outcome measures evaluated included abduction, forward elevation, external rotation, internal rotation, Simple Shoulder Test, Constant score, American Shoulder and Elbow Score, University of California Los Angeles Shoulder score, and Shoulder Pain and Disability Index. Results At follow-up, anatomic total shoulder arthroplasty demonstrated greater overhead range of motion and external rotation. All patient-reported outcomes remained similar between groups. Reverse shoulder arthroplasty patients were more likely to rate shoulders as much better or better after surgery (90% versus 67%, p = 0.004). Complications were observed in 24% of anatomic total shoulder arthroplasties and 8% of reverse shoulder arthroplasties (p = 0.02). Reoperation was more common in anatomic total shoulder arthroplasties (23% versus 4%, p = 0.003). Discussion At mid-to-long-term follow-up, reverse shoulder arthroplasties demonstrated significantly fewer complications and reoperations than anatomic total shoulder arthroplasties. Despite similar patient-reported outcomes, reverse shoulder arthroplasty patients were more likely to be satisfied with their shoulder.

scholarly journals Hybrid Glenoid Designs in Anatomic Total Shoulder Arthroplasty: A Systematic Review

2021 ◽  
pp. 155633162110408
Author(s):  
Ahmed Haleem ◽  
Phelopater Sedrak ◽  
Chetan Gohal ◽  
George S. Athwal ◽  
Moin Khan ◽  
...  
Keyword(s):  
Los Angeles ◽  
Shoulder Arthroplasty ◽  
Bone Ingrowth ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Glenoid Component ◽  
Patient Reported

Background: Hybrid glenoid components in total shoulder arthroplasty (TSA) utilize both polyethylene and metal components to provide short-term stability and long-term biologic fixation through bone ingrowth. Questions/Purpose: We sought to systematically review the literature for studies that assessed outcomes of TSA performed using hybrid glenoid components. Methods: PubMed, Medline, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and Embase were searched systematically for articles measuring clinical and patient-reported outcomes and rates of complication and revision following TSA using a hybrid glenoid component. Results: Seven studies with 593 shoulders were included in this review. The mean age of patients was 65 ± 1 years, and 46% of the population was male. Mean follow-up was 50 months (4.2 years). The overall complication rate was 7% and rate of revision was 2.5%; glenoid radiolucency was present in 33% of shoulders at mean follow-up of 50 months. Mean improvements in forward elevation, external rotation, internal rotation score, and abduction were 49°, 28°, 2 points, and 42°, respectively. Mean improvements in Constant, American Shoulder and Elbow Surgeons (ASES), and University of California, Los Angeles (UCLA) scores were 36 points, 52 points, and 17 points, respectively. Conclusion: Our review found that TSA using hybrid glenoid components results in low rates of complication and revision at early follow-up. Long-term studies are warranted to understand more fully the role of hybrid glenoid components in TSA.

scholarly journals Comparative Outcomes of Various Combinations of Bilateral Shoulder Arthroplasty

Hand ◽  
2019 ◽  
Vol 15 (5) ◽  
pp. 707-712 ◽  
Author(s):  
Jennifer Kurowicki ◽  
Jacob J. Triplet ◽  
Samuel Rosas ◽  
Derek D. Berglund ◽  
Brandon Horn ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Patient Reported Outcome Measures ◽  
Patient Reported Outcome ◽  
Simple Shoulder Test ◽  
Patient Reported ◽  
And Function

Background: In the setting of bilateral shoulder arthroplasty (BSA), differences in functional outcomes and motion between anatomic total shoulder arthroplasty (TSA) and reverse shoulder arthroplasty (RSA) are unknown. The purpose of this study was to compare the effectiveness of treatment for various combinations of TSA procedures. Methods: A review of prospectively collected data from an institutional shoulder surgery repository was performed for patients who underwent any combination of bilateral TSA or RSA surgery. Based on the combination of shoulder arthroplasty, patients were divided into the following subgroups: bilateral TSA (TSA/TSA), bilateral RSA (RSA/RSA), or unilateral TSA with contralateral RSA (TSA/RSA). A total of 73 patients (146 shoulders), with a minimum of 2-year follow-up, who underwent any combination of bilateral TSA or RSA from 2007 to 2014 were included. Pre- and postoperative patient-reported outcome measures and measured motion were evaluated between the 3 groups. Results: There were 47 TSA/TSA, 17 RSA/RSA, and 9 TSA/RSA patients with a mean age of 72 years and mean follow-up of 51 months. Preoperatively, TSA/TSA had significantly higher Simple Shoulder Test scores, Visual Analog Scale (VAS) function, active elevation, and active external rotation compared with RSA/RSA. Postoperative scores were significantly superior in TSA/TSA compared with other combinations of shoulder arthroplasty except VAS pain and function. Change in pre- to postoperative (effectiveness of treatment) internal rotation was superior in the TSA/TSA group compared with RSA/RSA and TSA/RSA; however, no other differences were observed. Conclusions: Bilateral TSA patients have higher preoperative function and motion. Although some postoperative outcomes differ among combinations of BSA, the overall effectiveness of treatment for patients undergoing BSA is similar between various combinations of arthroplasty.

Reassessing the minimum two-year follow-up standard after total shoulder arthroplasty—Is one year sufficient?

2020 ◽  
pp. 175857322092284
Author(s):  
Kuhan A Mahendraraj ◽  
Michael P Carducci ◽  
Joseph W Galvin ◽  
Samuel W Golenbock ◽  
Florian Grubhofer ◽  
...  
Keyword(s):  
Range Of Motion ◽  
Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Level Of Evidence ◽  
Patient Reported ◽  
Total Shoulder Arthroplasties ◽  
One Year ◽  
Shoulder Arthroplasties ◽  
Reverse Total Shoulder

Background US Food and Drug Administration Investigation Device Exemption studies and academic journals emphasize the importance of two-year follow-up data in reporting outcomes of total shoulder arthroplasty, but there is limited data evaluating appropriate follow-up length. We aim to evaluate change in postoperative outcomes and complications between one and two years following anatomic and reverse total shoulder arthroplasties. Methods We retrospectively identified 250 patients who underwent anatomic and reverse total shoulder arthroplasties between 2013 and 2016 from a single surgeon arthroplasty registry. Patients without both one- and two-year follow-up data were excluded. We compared American Shoulder and Elbow Surgeons (ASES) score, Visual Analog Scale for pain, and goniometer-measured range of motion. Results Patient-reported outcome measurements ( p > 0.05) did not change between one and two years postoperatively following both reverse ( n = 146) and anatomic ( n = 104) total shoulder arthroplasties. Range of motion increased slightly ( p < 0.05), but this change was not clinically relevant. There were no additional complications. Discussion Minimum two-year clinical follow-up may not be necessary for future shoulder arthroplasty Investigation Device Exemption and other peer-reviewed investigations. Patient-reported outcomes (ASES and pain score) and range of motion plateau at one year postoperatively without additional complications. One-year follow-up is an acceptable minimum follow-up length. Level of evidence Level III—retrospective analysis.

scholarly journals Reverse Shoulder Arthroplasty Using a Bone-preserving Glenoid Component: Clinical and Radiographic Outcomes

2018 ◽  
Vol 2 ◽  
pp. 247154921876168 ◽  
Author(s):  
Joaquin Sanchez-Sotelo ◽  
Ngoc Tram V Nguyen ◽  
Mark E Morrey
Keyword(s):  
Shoulder Arthroplasty ◽  
External Rotation ◽  
Reverse Shoulder Arthroplasty ◽  
Deep Infection ◽  
Glenoid Component ◽  
Cuff Tear ◽  
Radiographic Outcomes ◽  
Humeral Component ◽  
And Function ◽  
Rate Of Failure

Introduction Primary reverse shoulder arthroplasty has been reported to provide good outcomes. The majority of designs utilize a large portion of the glenoid. Some studies have reported worrisome rates of notching and stress fractures of the acromion or scapular spine. The purpose of this study was to determine the outcome and complications of a bone-preserving reverse prosthesis with limited ingrowth glenoid surface paired with an onlay humeral component. Materials and methods Between 2014 and 2015, 96 reverse arthroplasties were implanted using a bone-preserving reverse with a 135° onlay humeral bearing. Six patients died. The remaining 87 patients (90 shoulders) were followed for 2 years or until revision. Mean age was 69.3 years. The underlying diagnosis was cuff tear arthropathy (13), irreparable cuff tear (39), osteoarthritis (32), and other (6). Shoulders were followed for 2 years or until revision surgery. Results Reverse shoulder arthroplasty resulted in significant improvements in pain, motion, and function. At most recent follow-up, 74 shoulders had no or mild pain. Elevation was 131° ± 31° and external rotation 46° ± 21°. The mean American Shoulder and Elbow Surgeons (ASES) score was 76. There were 4 reoperations for deep infection (2), periprosthetic fracture, and glenoid loosening. None of the remaining arthroplasties were loose. There was one stress fracture of the acromion and one of the spine of the scapula. No radiographic notching or dislocation was observed. Discussion Primary reverse arthroplasty using a bone-preserving glenoid component and an anatomic onlay humeral bearing provides satisfactory clinical outcomes with a very low rate of failure and complications.

Glenoid bone grafting in primary anatomic total shoulder arthroplasty: a systematic review

2020 ◽  
pp. 175857322091765
Author(s):  
Betty Zhang ◽  
Gavinn Niroopan ◽  
Chetan Gohal ◽  
Bashar Alolabi ◽  
Timothy Leroux ◽  
...  
Keyword(s):  
Bone Loss ◽  
Shoulder Arthroplasty ◽  
Bone Grafting ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Level Of Evidence ◽  
Total Shoulder Arthroplasties ◽  
Component Loosening ◽  
Shoulder Arthroplasties

Background Primary anatomic total shoulder arthroplasty can be challenging in patients with complex glenoid wear patterns and bone loss. Severe retroversion (>15°) or significant bone loss may require bone grafting. This review summarizes the rate of revision and long-term outcomes of anatomic total shoulder arthroplasty with bone graft. Methods A systematic search of MEDLINE, Embase, PubMed, and CENTRAL databases was conducted from the date of inception to 23 October 2018. Two reviewers independently screened articles for eligibility and extracted data for analysis. The primary outcome was rate of revision. The secondary outcomes were rate of component loosening, functional outcome, and range of motion. Results Of the 1056 articles identified in the search, 26 underwent full-text screening and 7 articles were included in the analysis. All procedures were one-stage anatomic total shoulder arthroplasties. The rate of revision was 5.4% with component loosening and infection listed as indications over a weighted mean follow-up period of 6.3 years. Complications occurred in 12.6% of patients. Conclusion Glenoid bone grafting in anatomic total shoulder arthroplasty results in comparable revision rates and improvement in pain compared to augmented glenoid components and reverse shoulder arthroplasty. Due to the low quality of evidence, further prospective studies should be conducted. Level of evidence IV

Effect of Implant Shape and Material Properties on Stresses in the Glenoid Components of Total Shoulder Arthroplasties: A Finite Element Analysis

2010 ◽  
Author(s):  
Jingzhou Zhang ◽  
Charlie Yongpravat ◽  
Marc D. Dyrszka ◽  
William N. Levine ◽  
Thomas R. Gardner ◽  
...  
Keyword(s):  
Humeral Head ◽  
Glenohumeral Joint ◽  
Total Shoulder Arthroplasty ◽  
Peak Stress ◽  
Glenoid Component ◽  
Joint Stability ◽  
Element Analysis ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties ◽  
Glenoid Loosening

The geometry of the glenohumeral joint is osseous, naturally nonconforming and minimally constrained, thus the essential requirement of a glenohumeral prosthesis in total shoulder arthroplasty (TSA) is prevention of joint degeneration and glenoid loosening. A variety of glenoid prostheses have been developed. Nonconforming glenohumeral implants are common for TSA. However, the nonconforming shape increases the instability when the humeral head is in the central region, where motion frequently occurs. Conforming implants can increase joint stability, but the “rocking-horse” effect [1] caused by the conforming shape is thought to lead to high stresses and moments at the glenoid rim when the humeral head approaches the periphery during its range of motion. The hybrid design, with a conforming center and a nonconforming periphery, combines the advantages of both nonconforming and conforming implant geometries. It has been shown [2] that the peak stress generated in glenoid components during activities of daily living can be as high as 25 MPa, which exceeds the polyethylene yield strength of the glenoid component and can lead to wear and cold flow of the component. Polyethylene has also been shown to be viscoelastic [3]. Therefore, both elastic-plastic and viscoelastic-plastic models of the glenoid implant were used to determine how viscoelasticity affected stress in the implant. The effects of implant shape on the stresses in the center, transition, and superior zones for the three different glenoid implant shapes, as well as on the stress in the underlying cement and bone, were determined in this study.

scholarly journals Fretting and Corrosion in Modular Shoulder Arthroplasty: A Retrieval Analysis

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Johannes A. Eckert ◽  
Ulrike Mueller ◽  
Sebastian Jaeger ◽  
Benjamin Panzram ◽  
J. Philippe Kretzer
Keyword(s):  
Titanium Alloy ◽  
Shoulder Arthroplasty ◽  
Metal Ion ◽  
Total Shoulder Arthroplasty ◽  
Elevated Serum ◽  
Cobalt Chromium ◽  
Weak Correlation ◽  
Metal Debris ◽  
Total Shoulder Arthroplasties ◽  
Shoulder Arthroplasties

Tribocorrosion in taper junctions of retrieved anatomic shoulder arthroplasty implants was evaluated. A comparison of the tribocorrosion between cobalt-chromium and titanium alloy stems was conducted and the observations were correlated with the individual’s clinical data. Adverse effects caused by metal debris and subsequent elevated serum metal ion levels are frequently reported in total hip arthroplasty. In total shoulder arthroplasty, to date only a small number of retrieval analyses are available and even fewer address the issue of tribocorrosion at the taper junctions. A total of 36 retrieved hemiarthroplasties and total shoulder arthroplasties were assessed using the modified Goldberg score. The prevalence of fretting and corrosion was confirmed in this cohort. Titanium stems seem to be more susceptible to damage caused by tribocorrosion than cobalt-chromium stems. Furthermore, stemless designs offered less tribocorrosion at the taper junction than stemmed designs. A weak correlation between time to revision and increased levels of tribocorrosion was seen. Whether or not tribocorrosion can lead to adverse clinical reactions and causes failure of shoulder arthroplasties remains to be examined.

scholarly journals Anatomic total shoulder arthroplasty with posterior capsular plication versus reverse shoulder arthroplasty in patients with biconcave glenoids: A matched cohort study

2018 ◽  
Vol 26 (2) ◽  
pp. 230949901876857 ◽  
Author(s):  
Eduard Alentorn-Geli ◽  
Nathan R Wanderman ◽  
Andrew T Assenmacher ◽  
John W Sperling ◽  
Robert H Cofield ◽  
...  
Keyword(s):  
Shoulder Arthroplasty ◽  
Reverse Shoulder Arthroplasty ◽  
Total Shoulder Arthroplasty ◽  
Simple Shoulder Test ◽  
Posterior Subluxation ◽  
The Mean ◽  
Group 2 ◽  
And Function ◽  
Group 1

Purpose: To compare the outcomes of total shoulder arthroplasty (TSA) with posterior capsule plication (PCP) and reverse shoulder arthroplasty (RSA) in patients with primary osteoarthritis, posterior subluxation, and bone loss (Walch B2). Patients and methods: All shoulders undergoing anatomic TSA with PCP were retrospectively identified (group 1, G1) and compared to shoulders undergoing RSA (group 2, G2) for Walch B2 osteoarthritis. There were 15 patients in G1 (mean (SD) age and follow-up of 70.5 (7.5) years and 42.8 (18.4) months, respectively) and 16 patients in G2 (mean (SD) age and follow-up of 72.6 (5.4) years and 35.1 (14.2) months, respectively). Results: Both groups had substantial improvements in pain and function. In G1, results were excellent in 80% and satisfactory in 20%, compared to 81% and 6% in G2, respectively ( p = 0.2). The mean (SD) American Shoulder and Elbow Surgeons score was 91.2 (6.7) and 80.3 (14.3) in G1 and G2, respectively ( p = 0.08). The mean Simple Shoulder Test score was 10.6 in G1 and 8.5 in G2 ( p = 0.01). There were no reoperations in either group, but G1 had seven postoperative complications. Conclusions: The outcomes of TSA with PCP are comparable to RSA in patients with osteoarthritis and biconcave glenoids. However, TSA leads to more complications while RSA leads to lower functional outcomes.

Bilateral total shoulder arthroplasty: A systematic review of clinical outcomes

2020 ◽  
pp. 175857322091682
Author(s):  
John-Rudolph H Smith ◽  
Darby A Houck ◽  
Jessica A Hart ◽  
Jonathan T Bravman ◽  
Rachel M Frank ◽  
...  
Keyword(s):  
Patient Satisfaction ◽  
Clinical Outcomes ◽  
Shoulder Arthroplasty ◽  
English Language ◽  
External Rotation ◽  
Total Shoulder Arthroplasty ◽  
Cochrane Library ◽  
Level Of Evidence ◽  
Patient Reported

Background The purpose of this study was to describe the clinical outcomes following bilateral total shoulder arthroplasty (TSA). Methods A systematic search of the PubMed, Embase, and Cochrane Library databases following PRISMA guidelines was performed. English-language literature published from 2010 to 2018 analyzing bilateral TSA (anatomic and/or reverse) with a minimum one-year follow-up was reviewed by two independent reviewers. Study quality was evaluated with the Modified Coleman Methodology Score and the methodological index for non-randomized studies score. Results Eleven studies (1 Level II, 3 Level III, 7 Level IV) with 292 patients were included. Two studies reported on bilateral anatomic TSA ( n = 54), six reported on bilateral reverse TSA (RTSA; n = 168), two reported on anatomic TSA with contralateral RTSA (TSA/RTSA; n = 31), and one compared bilateral anatomic TSA ( n = 26) and bilateral RTSA ( n = 13). Among studies, mean revision rate ranged from 0% to 10.53% and mean complication rate ranged from 4.9% to 31.3%. At final follow-up, patients experienced significant overall improvements in range of motion and patient-reported outcome score measurements. However, bilateral anatomic TSA resulted in greater improvements in external rotation compared to bilateral RTSA. Overall patient satisfaction was 91.0%. Conclusion The available data indicate that bilateral TSA allows for functional and pain improvements and result in high patient satisfaction. Level of evidence IV.

Sign in / Sign up

Export Citation Format

Share Document