Continuous Fixed-Bed Column Studies of Textile Effluent Treatment using Multi-Walled Carbon Nanotubes Originated from Rosmarinus officinalis Oil

2022 ◽  
Vol 10 (4) ◽  
pp. 22-30
Author(s):  
S. Valliammai ◽  
K. Gopal ◽  
R. Nithya ◽  
L. Rama Priya ◽  
D. Kavitha
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Service Time ◽  
Fixed Bed ◽  
Rosmarinus Officinalis ◽  
Time Model ◽  
Fixed Bed Column ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Bed Depth Service Time

A continuous adsorption study in a fixed-bed column was carried out using Multi-walled Carbon Nanotubes derived from Rosmarinus officinalis oil as an adsorbent for removing the textile dye Acid blue 40 from an aqueous solution. The adsorbent, MWNTs were prepared from Rosmarinus officinalis oil as a precursor to Fe/Mo catalyst supported on silica at 650 ºC under N2 atmosphere by spray pyrolysis process characterized by scanning electron microscopy, Transmission Electron microscopy, and Raman spectroscopy. The effects of adsorbent bed height (2–6 cm), initial ion concentration (20– 60 mg/L), and flow rate (10–30 mL/min) on the column performance were analyzed. The breakthrough curve was analyzed using the mathematical models of Thomas, Yoon-Nelson, and bed depth service time. The Thomas model at different conditions defined the behaviors of the breakthrough curves. The bed depth service time model showed good agreement with the experimental data. The high values of correlation coefficients (R2 0.9875) obtained indicate the validity of the bed depth service time model for the present column system.

scholarly journals Study of a fixed-bed column in the adsorption of an azo dye from an aqueous medium using a chitosan–glutaraldehyde biosorbent

2017 ◽  
Vol 36 (1-2) ◽  
pp. 215-232 ◽  
Author(s):  
Jaime López-Cervantes ◽  
Dalia I Sánchez-Machado ◽  
Reyna G Sánchez-Duarte ◽  
Ma A Correa-Murrieta
Keyword(s):  
Flow Rate ◽  
Service Time ◽  
Fixed Bed ◽  
Textile Dye ◽  
Time Model ◽  
Fixed Bed Column ◽  
Bed Height ◽  
Direct Blue ◽  
Direct Blue 71 ◽  
Bed Depth Service Time

A continuous adsorption study in a fixed-bed column was carried out using a chitosan–glutaraldehyde biosorbent for the removal of the textile dye Direct Blue 71 from an aqueous solution. The biosorbent was prepared from shrimp shells and characterized by scanning electron microscopy, X-ray diffraction, and nuclear magnetic resonance spectroscopy. The effects of chitosan–glutaraldehyde bed height (3–12 cm), inlet Direct Blue 71 concentration (15–50 mg l−1), and feed flow rate (1–3 ml min−1) on the column performance were analyzed. The highest bed capacity of 343.59 mg Direct Blue 71 per gram of chitosan–glutaraldehyde adsorbent was obtained using 1 ml min−1 flow rate, 50 mg l−1 inlet Direct Blue 71 concentration, and 3 cm bed height. The breakthrough curve was analyzed using the Adams–Bohart, Thomas, and bed depth service time mathematical models. The behaviors of the breakthrough curves were defined by the Thomas model at different conditions. The bed depth service time model showed good agreement with the experimental data, and the high values of correlation coefficients (R2 ≥ 0.9646) obtained indicate the validity of the bed depth service time model for the present column system.

scholarly journals Adsorption of 2,4-dichlorophenoxyacetic acid using rice husk biochar, granular activated carbon, and multi-walled carbon nanotubes in a fixed bed column system

2018 ◽  
Vol 78 (8) ◽  
pp. 1812-1821 ◽  
Author(s):  
Mehdi Bahrami ◽  
Mohammad Javad Amiri ◽  
Bahareh Beigzadeh
Keyword(s):  
Carbon Nanotubes ◽  
Activated Carbon ◽  
Flow Rate ◽  
Fixed Bed ◽  
Dichlorophenoxyacetic Acid ◽  
Fixed Bed Column ◽  
Column System ◽  
Multi Walled Carbon Nanotubes ◽  
2,4 Dichlorophenoxyacetic Acid ◽  
Walled Carbon Nanotubes

Abstract The 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide, as an aromatic hydrocarbon, is a dangerous and toxic organic pollutant among the agricultural pesticides. In this research, the performance of the biochar made from rice husk (BRH), granular activated carbon (GAC), and multi-walled carbon nanotubes (MWCNTs) was investigated for adsorption of 2,4-D in a fixed-bed column system. The influence of pH (2, 5, 7, 9), flow rate (0.5, 1, 1.5 mL min−1), bed depth (3, 6, 9 cm), and influent 2,4-D concentration (50, 100, 150, 300 mg L−1) on the adsorption process was evaluated. The resulting breakthrough curves indicated that the higher removal efficiency of 2,4-D took place at the lower flow rate, lower influent 2,4-D concentration, higher bed depth, and lower pH. While in most cases the removal ability of GAC was better than other adsorbents, generally, this study confirmed that the BRH, as a cheap and sustainable material, can be a viable alternative to GAC and MWCNTs for remediation and treatment scenarios, particularly in developing countries.

scholarly journals Biocompatibility Characteristics of Titanium Coated with Multi Walled Carbon Nanotubes—Hydroxyapatite Nanocomposites

Materials ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 224 ◽  
Author(s):  
Jung-Eun Park ◽  
Yong-Seok Jang ◽  
Tae-Sung Bae ◽  
Min-Ho Lee
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Sol Gel ◽  
Pure Titanium ◽  
Cell Proliferation And Differentiation ◽  
Transmission Electron ◽  
Proliferation And Differentiation ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes

Multi walled carbon nanotubes-hydroxyapatite (MWCNTs-HA) with various contents of MWCNTs was synthesized using the sol-gel method. MWCNTs-HA composites were characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM). HA particles were generated on the surface of MWCNT. Produced MWCNTs-HA nanocomposites were coated on pure titanium (PT). Characteristic of the titanium coated MWCNTs-HA was evaluated by field-emission scanning electron microscopy (FE-SEM) and XRD. The results show that the titanium surface was covered with MWCNTs-HA nanoparticles and MWCNTs help form the crystalized hydroxyapatite. Furthermore, the MWCNTs-HA coated titanium was investigated for in vitro cellular responses. Cell proliferation and differentiation were improved on the surface of MWCNT-HA coated titanium.

Electron Microscopy Characterization of Platinum Catalysts Supported on Multi-walled Carbon Nanotubes

2012 ◽  
Vol 18 (S2) ◽  
pp. 1316-1317
Author(s):  
M.J. Guinel ◽  
N. Brodusch ◽  
R. Gauvin ◽  
Y. Verde-Gomez ◽  
B. Escobar-Morales
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Platinum Catalysts ◽  
Multi Walled Carbon Nanotubes ◽  
Microscopy Characterization ◽  
Walled Carbon Nanotubes

Extended abstract of a paper presented at Microscopy and Microanalysis 2012 in Phoenix, Arizona, USA, July 29 – August 2, 2012.

scholarly journals Polymeric Composites Based on Polyurea Matrix Reinforced with Carbon Nanotubes

2017 ◽  
Vol 54 (1) ◽  
pp. 41-44 ◽  
Author(s):  
Maria Adina Vulcan ◽  
Celina Damian ◽  
Paul Octavian Stanescu ◽  
Eugeniu Vasile ◽  
Razvan Petre ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Mechanical Properties ◽  
Carbon Nanotubes ◽  
Thermal Stability ◽  
Scanning Electron Microscopy ◽  
Tensile Tests ◽  
Mechanical Analysis ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Scanning Electron

This paper deals with the synthesis of polyurea and its use as polymer matrix for nanocomposites reinforced with multi-walled carbon nanotubes (MWCNT). Two types of materials were obtained during this research, the first cathegory uses the polyurea as matrix and the second one uses a mixture between epoxy resin and polyurea. The nanocomposites were characterized by Thermogravimetric Analysis (TGA), Dynamic Mechanical Analysis (DMA), Scanning Electron Microscopy (SEM) and Tensile Tests .The elastomeric features of nanocomposites were highlighted by the results which showed low value of Tg. Also higher thermal stability with ~40oC compared with commercial products (M20) were observed, but lower mechanical properties compared to neat polyurea.

scholarly journals Carbon Nanofibers from Carbon Nanotubes by 1.2 keVAr+Sputtering at Room Temperature

2014 ◽  
Vol 2014 ◽  
pp. 1-5 ◽  
Author(s):  
Shuang-Xi Xue ◽  
Qin-Tao Li ◽  
Xian-Rui Zhao ◽  
Qin-Yi Shi ◽  
Zhi-Gang Li ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Carbon Nanofibers ◽  
Carbon Nanoparticles ◽  
Room Temperature ◽  
Ion Irradiation ◽  
Transmission Electron ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Carbon Nanowires

Multi-walled carbon nanotubes (MWCNTs) were irradiated by 1.2 keV Ar ion beams for 15–60 min at room temperature with current density of 60 µA/cm2. The morphology and microstructure are investigated by scanning electron microscopy, transmission electron microscopy and Raman spectroscopy. The results show that carbon nanofibers are achieved after 60 min ion irradiation and the formation of carbon nanofibers proceeds through four periods, carbon nanotubes—amorphous carbon nanowires—carbon nanoparticles along the tube axis—conical protrusions on the nanoparticles surface—carbon nanofibers from the conical protrusions.

scholarly journals Measurement of Flexural Rigidity of Multi-Walled Carbon Nanotubes by Dynamic Scanning Electron Microscopy

Fibers ◽  
2020 ◽  
Vol 8 (5) ◽  
pp. 31 ◽  
Author(s):  
Renata Fortini ◽  
Asmus Meyer-Plath ◽  
Dominic Kehren ◽  
Ulrich Gernert ◽  
Leonardo Agudo Jácome ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Scanning Electron Microscopy ◽  
Flexural Rigidity ◽  
Toxicological Studies ◽  
Resonance Frequencies ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Dynamic Scanning ◽  
Scanning Electron

In this work the flexural rigidity of individual large diameter multi-walled carbon nanotubes (MWCNTs) was investigated. The bending modulus were obtained by detecting the resonance frequencies of mechanically excited cantilevered carbon nanotubes using the so-called dynamic scanning electron microscopy technique, and applying the Euler–Bernoulli beam theory. For the nanotubes studied, we determined a modulus of up to 160 GPa. This agrees with values reported by other authors for MWCNTs produced by catalytic chemical vapor deposition, however, it is 6-8 times smaller than values reported for single and multi-walled carbon nanotubes produced by arc-discharge synthesis. Toxicological studies with carbon nanotubes have been showing that inhaled airborne nanofibers that reach the deep airways of the respiratory system may lead to serious, asbestos-like lung diseases. These studies suggested that their toxicity critically depends on the fiber flexural rigidity, with high rigidity causing cell lesions. To complement the correlation between observed toxicological effects and fiber rigidities, reliable and routinely applicable measurement techniques for the flexural rigidity of nanofibers are required.

Electron Microscopy and Raman Characterization of Multi-Walled Carbon Nanotubes Grown by Chemical Vapor Deposition

2008 ◽  
Vol 14 (S2) ◽  
pp. 304-305
Author(s):  
M Ellis ◽  
T Jutarosaga ◽  
S Smith ◽  
Y Wei ◽  
S Seraphin
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Chemical Vapor Deposition ◽  
New Mexico ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Multi Walled Carbon Nanotubes ◽  
Walled Carbon Nanotubes ◽  
Raman Characterization

Extended abstract of a paper presented at Microscopy and Microanalysis 2008 in Albuquerque, New Mexico, USA, August 3 – August 7, 2008

Sign in / Sign up

Export Citation Format

Share Document