scholarly journals Comparison of Medicaments Used in Regenerative Endodontics in Terms of Dentin Microhardness and Adhesion of Mineral in Terms of Dentin Microhardness and Adhesion of Mineral Trioxide Aggregate Trioxide Aggregat

2020 ◽  
Vol 27 (3) ◽  
Author(s):  
Esma Saricam ◽  
◽  
Neslihan Bulak ◽  
Esra Özyurt ◽  
Suat Özcan ◽  
...  
Keyword(s):  
Bond Strength ◽  
Clavulanic Acid ◽  
Root Canal ◽  
Mineral Trioxide Aggregate ◽  
Significance Level ◽  
Regenerative Endodontics ◽  
Significant Difference ◽  
Amoxicillin Clavulanic Acid ◽  
Root Canal Dentin ◽  
Push Out

Eliminating microorganisms in the root canal system is important for the success of regenerative endodontics. Objective: This study evaluated the effects of different antibiotic pastes used for regenerative endodontic procedures on dentin microhardness and the push-out bond strength of mineral trioxide aggregate (MTA) to root canal dentin. Methods: Sixty-four maxillary central incisors were instrumented and randomly divided into the following four groups (n = 16) for medicament treatment: triple antibiotic paste, amoxicillin+clavulanic acid, cefaclor, and control (no dressing). After 21 days, two root segments were obtained by sectioning the roots horizontally for push-out and microhardness evaluations. MTA was placed into the root canal of the sectioned segment for the push-out test. In the microhardness evaluation, three indentations were made at 500 and 1,000 μm from the canal lumen. The arithmetic mean was then calculated for each distance. ANOVA with post hoc Scheffe test and t test were used for the statistical analyses. The significance level was set at p < 0.05. Results: No significant difference was found between the groups in terms of push-out bond strength (p > 0.05). Cefaclor and amoxicillin+clavulanic acid reduced the microhardness values of the dentin at 500 μm (p < 0.05) while cefaclor had the lowest value at 1,000 μm (p < 0.05). Conclusion: Cefaclor reduced the microhardness value more than the other medicaments did at a depth of 1,000 μm. The pastes provided similar adhesion of MTA.

scholarly journals Regional bond strengths to root canal dentin of fiber posts luted with three cementation systems

2011 ◽  
Vol 22 (6) ◽  
pp. 460-467 ◽  
Author(s):  
Giovana Mongruel Gomes ◽  
Osnara Maria Mongruel Gomes ◽  
Alessandra Reis ◽  
João Carlos Gomes ◽  
Alessandro Dourado Loguercio ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Repeated Measures ◽  
Resin Cement ◽  
Failure Pattern ◽  
Fiber Posts ◽  
Significant Difference ◽  
Root Canal Dentin ◽  
Adhesive Cement ◽  
Push Out

This study evaluated the influence of the cementation system on the regional push-out bond strength and failure pattern of fiber posts to radicular dentin. The roots of 48 extracted human incisors were prepared and divided into 3 groups (n=16), according to the cementation system: AdperScotchbond Multi-Purpose + resin cement RelyX ARC (SBMP+ARC); Adper SingleBond 2 + RelyX ARC (SB+ARC) and; RelyX U100 self-adhesive resin cement (U100). The posts were cemented as per manufacturer’s instructions for each cementation system. After 1 week, the roots were sectioned transversely into 6 discs. Two discs were obtained from the cervical, middle and apical thirds and the push-out test was carried out. The failure pattern was examined on all debonded specimens. The data were analyzed by two-way repeated measures ANOVA and Tukey’s test. When U100 was used, no statistically significant difference (p>0.05) was observed among the different root regions. Statistically higher push-out bond strength values were detected in the cervical third for SBMP+ARC and SB+ARC (p<0.05). The U100 showed significantly more mixed failures than SBMP+ARC in the apical third (p<0.05). In conclusion, the self-adhesive cement RelyX U100 was the only cement not sensitive to the root canal region.

scholarly journals Effect of Root Dentin Pretreatment on Micro-Push-Out Bond Strength of Fiber Posts to Root Canal Dentin: Cold Atmospheric Argon Plasma (CAAP) and Ethylenediaminetetraacetic Acid (EDTA)

2021 ◽  
Vol 2021 ◽  
pp. 1-6
Author(s):  
Farzaneh Sadeghi Mahounak ◽  
Mahdi Abbasi ◽  
Ladan Ranjbar Omrani ◽  
Naghmeh Meraji ◽  
Maryam Rezazadeh Sefideh ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Ethylenediaminetetraacetic Acid ◽  
Argon Plasma ◽  
Fiber Posts ◽  
Significant Difference ◽  
Mode Of Failure ◽  
Atmospheric Argon ◽  
Root Canal Dentin ◽  
Push Out

Purpose. Debonding from the root canal dentin is the most common failure mode of fiber posts. This study aimed to assess the effects of cold atmospheric argon plasma (CAAP) and ethylenediaminetetraacetic acid (EDTA) on micro-push-out bond strength of fiber posts to root canal dentin. Materials and Methods. Forty maxillary canine teeth were decoronated, underwent endodontic treatment, and were stored in an incubator for 7 days. After post space preparation, the teeth were randomly divided into four groups for different surface treatments: (I) saline, (II) 17% EDTA, (III) CAAP, and (IV) 17% EDTA + CAAP. Fiber posts (Whitepost no. 2, FGM) were cemented into the root canals using Panavia F2.0 resin cement, and 1 mm-thick sections were made at the coronal, middle, and apical thirds of the roots. The samples underwent micro-push-out bond strength test. The mode of failure was also determined under a stereomicroscope. Data were analyzed using three-way ANOVA and Tukey’s post hoc test (α = 0.05). The mode of failure data were analyzed using the chi-square test. Results. The mean micro-push-out bond strength of fiber posts was not significantly different in the four groups ( P > 0.05 ). However, the bond strength values in the coronal third were significantly higher than the corresponding values in the apical third ( P = 0.01 ). There was no significant difference in the modes of failure between the groups ( P > 0.05 ). Conclusion. Application of CAAP alone or in combination with 17% EDTA could not successfully increase the bond strength of fiber posts to root canal dentin.

scholarly journals Effect of Glass Fiber Post Adaptation on Push-Out Bond Strength to Root Dentin

2019 ◽  
Vol 30 (4) ◽  
pp. 350-355 ◽  
Author(s):  
Thiago Lopes de Freitas ◽  
Rafael Pino Vitti ◽  
Milton Edson Miranda ◽  
William Cunha Brandt
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Root Canal ◽  
Failure Modes ◽  
Resin Cement ◽  
Adhesive Failure ◽  
Fiber Post ◽  
Significant Difference ◽  
Glass Fiber Post ◽  
Push Out

Abstract The aim of this study was to evaluate the effect of different glass fiber posts (GFPs) diameters on the push-out bond strength to dentin. Forty unirradicular human teeth were endodontically treated and used for cementation of GFPs (White Post DC, FGM) with different diameters (n=10): P1 - ø 1.6 mm coronal x 0.85 mm apical; P2 - ø 1.8 mm coronal x 1.05 mm apical; P5 - ø 1.4 mm coronal x 0.65 mm apical; and PC - customized post number 0.5 with composite resin (Tetric Ceram A2, Ivoclair Vivadent). All GFPs were cemented into the root canal using a dual-curing luting composite (Variolink II, Ivoclar Vivadent). One slice (1.7 mm) of each root third of cemented GFP (cervical, middle, and apical) was submitted to push-out testing. Failure modes of all specimens were classified as: adhesive failure between resin cement and post; adhesive failure between dentin and resin cement; cohesive failure within resin cement, post or dentin; and mixed failure. The data were analyzed with two-way ANOVA and Tukey’s test (a=0.05). The highest bond strength values were presented for the P2 and PC groups. There was no statistically significant difference between the GFP thirds in each group. The groups P2, P5, and PC showed predominantly adhesive failure. For P1, the most prevalent type of failure was adhesive between resin cement and post. It may be concluded that a glass fiber post that is well adapted to the root canal presents higher bond strength values, regardless of GFP third.

Effect of different surface treatments on the push-out bond strength of fiber post to root canal dentin

2009 ◽  
Vol 108 (2) ◽  
pp. e74-e80 ◽  
Author(s):  
Ebru Özsezer Demiryürek ◽  
Şafak Külünk ◽  
Duygu Saraç ◽  
Gözde Yüksel ◽  
Bilinç Bulucu
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Surface Treatments ◽  
Fiber Post ◽  
Root Canal Dentin ◽  
Push Out

scholarly journals Adhesion of real seal to human root dentin treated with different solutions

2012 ◽  
Vol 23 (5) ◽  
pp. 521-526 ◽  
Author(s):  
Renata Baldissera ◽  
Ricardo Abreu da Rosa ◽  
Márcia Helena Wagner ◽  
Milton Carlos Kuga ◽  
Fabiana Soares Grecca ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Failure Modes ◽  
Chlorhexidine Gluconate ◽  
The Other ◽  
Significant Difference ◽  
Root Dentin ◽  
Bond Strengths ◽  
Group 2 ◽  
Push Out

The aim of this study was to evaluate the effects of different irrigants on sealer-dentin bond strength when using Real Seal. Thirty single-rooted teeth were divided into 3 groups. In one group, the teeth were irrigated with 3 mL of 2.5% NaOCl after each file change, flushed with 17% EDTA for 3 min and finally rinsed with 3 mL of 2.5% NaOCl. In the other two groups, rinse with NaOCl was replaced with 2% chlorhexidine gluconate (CHX) and 0.9% saline, respectively. Each root was sectioned transversally into apical, middle and coronal thirds to obtain 2-mm-thick slices. Each slice was filled with Real Seal and Resilon. Push-out test was used to analyze bond strength and failure modes were classified as adhesive, cohesive or mixed, according to SEM observations. The push-out test did not reveal any statistically significant difference (p>0.05) between the irrigants. However, the groups exhibited significantly different (p<0.05) bond strengths in terms of the root canal third. Higher bond strength was observed at the apical third when compared with coronal third, while middle third presented intermediary values. Fifteen specimens were analyzed by SEM (5 per group). Eleven specimens exhibited adhesive failures (5 in saline, 4 in NaOCl and 2 in CHX group); 2 cohesive failures were observed in the CHX group, and 1 mixed failure each was observed in the CHX and NaOCl groups. The tested irrigants did not influence the bond strength of Resilon and Real Seal to dentin. The apical third exhibited higher mean bond strengths and adhesive failures were predominant.

scholarly journals Effect of Calcium Hypochlorite and Sodium Hypochlorite as Root Canal Irrigants on Push-Out Bond Strength of Fiber Post Cemented with Etch-and-Rinse Resin Cement: An In Vitro Study

2021 ◽  
Author(s):  
Mahdiyeh Sheikh Ghahderijani ◽  
Maryam Khoroushi ◽  
Atiyeh Feiz
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Resin Cement ◽  
Calcium Hypochlorite ◽  
Root Canal Irrigants ◽  
Fiber Posts ◽  
Etch And Rinse ◽  
Significant Difference ◽  
Push Out ◽  
Group 1

Objectives: Calcium hypochlorite (CH) has been recently used as a root canal irrigant. The aim of the present study was to compare the effect of CH and sodium hypochlorite (SH), as root canal irrigants, on the push-out bond strength of fiber posts cemented with an etch-and-rinse resin cement.  Materials and Methods: In this experimental in-vitro study, 40 human anterior teeth with similar root lengths were randomly divided into five groups (N=8) according to the protocol of root canal irrigation as follows: group 1: saline (control); group 2: 2.5% SH; group 3: 5.25% SH; group 4: 2.5% CH; group 5: 5% CH. Before post placement, the post space was irrigated using the same irrigation protocol, and after that, they were irrigated by distilled water. Fiber posts were cemented with All-Bond 3 bonding and Dou-Link Universal cement. After thermocycling (1000 cycles, 5- 55°C), a push-out test was performed, and data were analyzed using one-way analysis of variance and Tukey's post-hoc test with SPSS version 23 (α=0.05). Results: The highest and lowest mean bond strengths were detected in groups 2 and 5, respectively. There was no significant difference between group 1 and the SH groups (P>0.05), but the difference between group 1 and the CH groups was significant (P<0.001). There was a significant difference between SH groups and CH groups (P<0.001). Conclusion: Compared to SH, as a root canal irrigant, CH decreased the push-out bond strength of fiber posts cemented with an etch-and-rinse resin cement.  

scholarly journals Micro-push-out bond strength of Mineral—based root canal sealer in canals with different tapers.

2021 ◽  
Vol 10 (1) ◽  
pp. 1-7
Author(s):  
Nunna Vasavi ◽  
◽  
Kantheti Sirisha ◽  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Testing Machine ◽  
Root Canal Sealer ◽  
Rotary Instruments ◽  
Significant Difference ◽  
Ah Plus ◽  
Bond Strengths ◽  
The Difference ◽  
Push Out

Objective: The aim of this study was to assess the micro-push-out bond strength of a mineral-based root canal sealer, BioRoot RCS in canals prepared by K3XF rotary systems of two different tapers. Material and Methods: Eighty caries free maxillary central incisors were used in this study. The samples were allocated into 4 groups (n=20) according to the root canal sealer and taper of the rotary instruments. The samples were obturated using single cone obturation technique. From each root 1mm thick slices at coronal, middle and apical thirds were collected using hard tissue microtome under continuous water coolant. Push-out tests were done for these sections using a Universal testing machine (INSTRON 8801) at a crosshead speed of 1mm/min. One-way analysis of variance (ANOVA) was used to compare the bond strengths within groups and Tukey’s multiple post hoc analysis was used for pair-wise comparison of bond strengths. Results: AH Plus exhibited higher micro-push-out bond strength than BioRootRCS though they did not differ significantly (p>0.05). Preparation of root canals with 6% taper rotary instruments showed higher bond strength than 4% though they did not differ significantly (p>0.05). Conclusion: There was no significant difference between micro-push-out bond strength values of BioRoot RCS and AH Plus. The bond strength values were high in 6% taper canals than 4% canals though the difference was not significant statistically.

Effect of laser application on push out bond strength of FRC post to root canal dentin

2012 ◽  
pp. S11-.
Author(s):  
S Rikhtegaran ◽  
S Oskoee ◽  
F Pouralibaba ◽  
M Bahary ◽  
A. Chehrebardar
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Laser Application ◽  
Root Canal Dentin ◽  
Push Out

Effect of a zirconia primer on the push-out bond strength of zirconia ceramic posts to root canal dentin

2015 ◽  
Vol 114 (3) ◽  
pp. 398-402 ◽  
Author(s):  
Mahshid Torabi Ardakani ◽  
Rashin Giti ◽  
Masume Taghva ◽  
Samane Javanmardi
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Zirconia Ceramic ◽  
Root Canal Dentin ◽  
Push Out
Sign in / Sign up

Export Citation Format

Share Document