Kinetics Study of the Esterification of Acetic Acid with Methanol using Low-Corrosive Brønsted Acidic Ionic Liquids as Catalysts

Author(s):  
Duan-Jian Tao ◽  
Xiao-Liang Zhang ◽  
Na Hu ◽  
Zhang-Min Li ◽  
Xiang-Shu Chen

The kinetics for the esterification of acetic acid with methanol was studied systemically in the presence of low-corrosive Brønsted acidic ionic liquids (BAILs) as catalysts. The effect of various parameters such as catalyst type, agitation speed, temperature, catalyst loading, and molar ratio of the reactants on the conversion of acidic acid was studied in detail to obtain the optimal reaction conditions. Moreover, the pseudo-homogeneous (PH) kinetic model was utilized successfully to correlate the experimental data in the temperature range from 323.15 to 343.15 K. Thus, a complete kinetic equation for describing this esterification system was developed that provides to obtain the kinetic information for the simulation and design of catalytic distillation column in the synthesis of methyl acetate.

2008 ◽  
Vol 62 (3) ◽  
Author(s):  
Yuan-Yuan Wang ◽  
Wei Li ◽  
Li-Yi Dai

AbstractCyclodehydration of diethylene glycol using various Brønsted acidic ionic liquids as dual solvent-catalysts has been studied for the first time. Better results were obtained in the presence of 1-butyl-3-methylimidazolium hydrogen sulfate ([PSmim]HSO4) compared with other Brønsted acidic ionic liquids. Effects of the reaction conditions such as reaction temperature, reaction time and molar ratio of ionic liquid to diethylene glycol have been investigated. High diethylene glycol conversion, 97.0 %, and high 1,4-dioxane selectivity, 89.3 %, were obtained in [PSmim]HSO4 under optimum conditions. Hammett method was used to determine the acidity order of these ionic liquids and the results were consistent with the catalytic activities observed in the cyclodehydration reaction. Utilization of Brønsted acidic ionic liquids as dual solvent-catalysts has some advantages, e.g. high conversion of DEG, easy preparation and reuse of ionic liquids, avoiding toxic catalysts and solvents.


2013 ◽  
Vol 734-737 ◽  
pp. 2128-2131
Author(s):  
He Fang Wang ◽  
Hong Tao Liu ◽  
Li Yuan Jia ◽  
Yuan Yuan Wang ◽  
Yan Ji Wang

One step synthesis of ε-caprolactam from cyclohexanone and hydroxylamine used acidic ionic liquids [HSO3-b-N(CH3)HSO4 as reaction medium and catalyst were investigated. Reaction conditions were investigated to obtain the optimum conditions. The results indicate that the yield of CPO is 35.9% and the yield of CPL is 20.4% under optimal reaction conditions.


2017 ◽  
Vol 743 ◽  
pp. 355-359
Author(s):  
Svetlana A. Popova ◽  
Irina Yu. Chukicheva

[bnmim]HSO4 and [bnpy]HSO4 are active and environmentally friendly catalysts for the acetylation of camphene with acetic acid. The reaction provides isobornyl acetate with 100% selectivity and 72-86% yield. The effect of temperature, molar ratio camphene/acetic acid, and catalyst loading were investigated. The catalyst can be reused four times without loss of activity. Isobornyl acetate is an important fine chemical and has been used in the field of fragrance, medicine, organic synthesis and cosmetics [1]. It is an intermediary in the synthesis of camphor [2]. Usually it is prepared by an acid-catalized reaction of camphene with acetic acid or acetic anhydride. But this process has serious drawbacks such as the corrosion of equipment, non-recyclability of the catalyst and serious environmental pollution. In the face of increasing environmental requirements, the use of such catalysts becomes unacceptable. Therefore many studies have recently focused on the development of "clean" (green) processes for the production of terpene derivatives with high selectivity. For this purpose, heteropolyacids [3, 4], zeolites [5, 6], solid acid catalysts [7, 8], ion-exchange resin [9-11] were used as catalysts for synthesizing terpene esters. However, these catalysts have drawbacks such as a large ratio of catalyst/substrate, fast deactivation and a selectivity that leaves much to be desired. In the recent years ionic liquids (IL) have been investigated by many researchers as catalysts for different reactions. Due to its low volatility, negligible vapor pressure, reasonable thermal stability, outstanding recyclability and reusability, ionic liquids may be a viable alternative to widely applicable catalysts in the processes of modern synthetic chemistry, the green chemistry [12]. The improvement of the versatility of ionic liquids was achieved by creating acidic functionalized ionic liquids and combining the properties of a reagent and solvent [13]. A number of such ionic liquids were synthesized and successfully applied in the esterification reaction [14-17]. Received that the structure of the IL cation determines the direction of the rearrangement of terpene, whereas the nature of the anion affects the selectivity of the reaction [18, 19]. In the present work, we report the acetylation of camphene with acetic acid catalyzed by imidazolium and pyridinium ionic liquids (Scheme 1). The influence of various reaction parameters, such as the temperature, the molar ratio of camphene/acetic acid and catalyst loading, on the activity of the most active catalyst is also studied.


2011 ◽  
Vol 396-398 ◽  
pp. 2411-2415 ◽  
Author(s):  
Ping Lan ◽  
Li Hong Lan ◽  
Tao Xie ◽  
An Ping Liao

Isoamyl acetate was synthesized from isoamylol and glacial acetic acid with strong acidic cation exchanger as catalyst. The effects of reaction conditions such as acid-alcohol ratio, reaction time, catalyst dosage to esterification reaction have been investigated and the optimum reaction conditions can be concluded as: the molar ratio of acetic acid to isoamylol 0.8:1, reaction time 2h, 25 % of catalyst (quality of acetic acid as benchmark). The conversion rate can reach up to 75.46%. The catalytic ability didn’t reduce significantly after reusing 10 times and the results showed that the catalyst exhibited preferably catalytic activity and reusability.


2009 ◽  
Vol 5 (1) ◽  
Author(s):  
Jin-qiang Tian ◽  
Qiang Wang ◽  
Zhong-yuan Zhang

In order to significantly improve the biosynthesis of acyl-L-carnitines catalyzed by lipase, there must be an efficient and suitable reaction medium that is not only polar but also hydrophobic. [Bmim]PF6, which satisfies the above two requirements, was applied as the medium. The optimal reaction conditions were: for isovaleryl-L-carnitine, 0.22aW, 200mg molecular sieves, 60ºC, 4:1 of molar ratio (fatty acid:L-carnitine), 150rpm and 60h; for octanoyl-L-carnitine and palmitoyl-L-carnitine, 0.22aW, 250 mg molecular sieves, 5:1 of molar ratio (fatty acid:L-carnitine), 200rpm, 48h, 60ºC (octanoyl-L-carnitine) and 65ºC (palmitoyl-L-carnitine). Their overall yields could reach 59.14%, 90.79% and 98.03%, respectively. The yields of isovaleryl-L-carnitine, octanoyl-L-carnitine and palmitoyl-L-carnitine in [Bmim]PF6 were 16.21%, 73.67% and 44.22 % more than those in acetonitrile, respectively. [Bmim]PF6 as the medium was better than acetonitrile. It could not only enhance the yields of acyl-L-carnitines, but also protect the lipase activity.


RSC Advances ◽  
2017 ◽  
Vol 7 (44) ◽  
pp. 27558-27563 ◽  
Author(s):  
Martin Lijewski ◽  
James M. Hogg ◽  
Małgorzata Swadźba-Kwaśny ◽  
Peter Wasserscheid ◽  
Marco Haumann

Acid doping – coating of Pd/C catalysts with Lewis-acidic liquid films results in increased hydrogenation activity at very mild reaction conditions.


Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2562 ◽  
Author(s):  
Chia-Hung Su ◽  
Hoang Nguyen ◽  
Uyen Pham ◽  
My Nguyen ◽  
Horng-Yi Juan

This study investigated the optimal reaction conditions for biodiesel production from soursop (Annona muricata) seeds. A high oil yield of 29.6% (w/w) could be obtained from soursop seeds. Oil extracted from soursop seeds was then converted into biodiesel through two-step transesterification process. A highest biodiesel yield of 97.02% was achieved under optimal acid-catalyzed esterification conditions (temperature: 65 °C, 1% H2SO4, reaction time: 90 min, and a methanol:oil molar ratio: 10:1) and optimal alkali-catalyzed transesterification conditions (temperature: 65 °C, reaction time: 30 min, 0.6% NaOH, and a methanol:oil molar ratio: 8:1). The properties of soursop biodiesel were determined and most were found to meet the European standard EN 14214 and American Society for Testing and Materials standard D6751. This study suggests that soursop seed oil is a promising biodiesel feedstock and that soursop biodiesel is a viable alternative to petrodiesel.


2013 ◽  
Vol 750-752 ◽  
pp. 1231-1234 ◽  
Author(s):  
Li Xia Wang ◽  
Shu Heng Liu ◽  
Hua Yuan ◽  
Lin Lin Guo

Ion exchange resin-supported (NH4)6[MnMo9O32]8H2O with Waugh structure is used to prepare supported solid catalyst. Performance of this catalyst is researched by means of synthesis of isoamyl acetate. Optimal reaction conditions determined by orthogonal experiment are as follows: acid-alcohol molar ratio is 2.5:1, reaction time is 120 min, catalyst dosage is 0.8 g, dosage of water-carrying agent is 2.5 ml, esterification yield reaches 95.1%. This catalyst is characterized by high catalytic efficiency, easy separation and recovery, absence of environmental pollution and being reusable, etc.


2013 ◽  
Vol 781-784 ◽  
pp. 190-193
Author(s):  
Mei Xu ◽  
Hua Yuan ◽  
Wei Liu ◽  
Jian Wang ◽  
Feng Zhen Yang

The synthesis of isoamyl acetate with ammonium 9-molybdate manganese heteropolyacid salt supported activated carbon as catalyst was studied. The optimum reaction conditions are obtained as follows: isoamyl alcohol to acetic acid molar ratio = 1.646, the weight of catalyst is 40% of total weigh, m (acidulate catalyst)=0.2g, m (water carrying reagent toluene) = 3ml, reaction time is about 63 minutes. Selectivity is 100% and conversion rate is 89.48%.


Sign in / Sign up

Export Citation Format

Share Document