scholarly journals Removal Efficiency of Lipid-regulating Drug Clofibric Acid from the Aquatic Environment by Calcined Anionic Clay ZnAl-CO3

2020 ◽  
Vol 34 (2) ◽  
pp. 79-92
Author(s):  
El Hassane Mourid ◽  
Mohamed Lakraimi ◽  
Lhaj Benaziz ◽  
Mustapha Cherkaoui
Keyword(s):  
Wastewater Treatment ◽  
Hydrogen Bonds ◽  
Adsorption Capacity ◽  
Aquatic Environment ◽  
Electrostatic Interactions ◽  
Removal Rate ◽  
Clofibric Acid ◽  
Lipid Levels ◽  
Anionic Clay ◽  
Maximum Retention

Clofibric acid (CA) is widely used as regulator of lipid levels in blood; it is considered one of the residual drugs that have a high persistence in the aquatic environment. After wastewater treatment, only a small amount of CA can be removed. The aim of this work was to investigate the reduction of CA in contaminated wastewater using calcined anionic clay ZnAl-CO3, which was chosen for its higher adsorption capacity, recyclability, and non-regeneration of sludge. The maximum retention amount, Qm, exceeded 2220 mg g–1, and the value of DH° suggested a physical process. The removal rate achieved 90 %, and the remaining quantity was widely below the tolerance thresholds. Retention was achieved by hydrogen bonds and electrostatic interactions between the adsorbate molecules. Recycling tests clearly suggested that this material is recyclable, promising, and very effective compared to other adsorbents. This retention contributes to the attenuation of persistent lipid regulator.

Removal of selected non-steroidal anti-inflammatory drugs (NSAIDs), gemfibrozil, carbamazepine, b-blockers, trimethoprim and triclosan in conventional wastewater treatment plants in five EU countries and their discharge to the aquatic environment

2004 ◽  
Vol 50 (5) ◽  
pp. 253-260 ◽  
Author(s):  
N. Paxéus
Keyword(s):  
Wastewater Treatment ◽  
Activated Sludge ◽  
Aquatic Environment ◽  
Wastewater Treatment Plants ◽  
Removal Rate ◽  
Average Concentration ◽  
Operating Conditions ◽  
Removal Rates ◽  
Eu Countries ◽  
Acidic Drugs

The removal of commonly used pharmaceuticals (ibuprofen, naproxen, diclofenac, gemfibrozil, carbamazepine, atenolol, metoprolol and trimethoprim) and a biocide (triclosan) in operating wastewater treatment plants in five EU countries has been studied. Under normal operating conditions the acidic drugs and triclosan were partially removed with removal rates varying from ca. 20 to >95%. The highest removal rate was found for ibuprofen and triclosan (>90%) followed by naproxen (80%), gemfibrozil (55%) and diclofenac (39%). Ibuprofen undergoes an oxidative transformation to corresponding hydroxy- and carboxy- metabolites, which contributes to its high removal rate. Disturbances in the activated sludge process resulted in lower removal rates for all acidic drugs, mostly for diclofenac (<10% removed) but also for ibuprofen (<60% removed). The treatment of wastewaters by activated sludge usually did not result in any practical removal (<10%) of neutral carbamazepine or basic atenolol, metoprolol and trimethoprim. The removal rates of the investigated drugs and triclosan are discussed in terms of mechanisms responsible for their removal. Discharges of carbamazepine, diclofenac, gemfibrozil, naproxen, triclosan and trimethoprim from WWTPs to the aquatic environment, expressed as the average concentration in the effluent and the daily discharged quantity per person served by WWTPs were assessed.

scholarly journals Assessment of Microplastics in a Municipal Wastewater Treatment Plant with Tertiary Treatment: Removal Efficiencies and Loading per Day into the Environment

Water ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1339
Author(s):  
Javier Bayo ◽  
Sonia Olmos ◽  
Joaquín López-Castellanos
Keyword(s):  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Municipal Wastewater ◽  
Removal Rate ◽  
Treatment Plant ◽  
Source Control ◽  
Municipal Wastewater Treatment ◽  
Tertiary Treatment ◽  
Stable Performance ◽  
Wastewater Samples

This study investigates the removal of microplastics from wastewater in an urban wastewater treatment plant located in Southeast Spain, including an oxidation ditch, rapid sand filtration, and ultraviolet disinfection. A total of 146.73 L of wastewater samples from influent and effluent were processed, following a density separation methodology, visual classification under a stereomicroscope, and FTIR analysis for polymer identification. Microplastics proved to be 72.41% of total microparticles collected, with a global removal rate of 64.26% after the tertiary treatment and within the average retention for European WWTPs. Three different shapes were identified: i.e., microfiber (79.65%), film (11.26%), and fragment (9.09%), without the identification of microbeads despite the proximity to a plastic compounding factory. Fibers were less efficiently removed (56.16%) than particulate microplastics (90.03%), suggesting that tertiary treatments clearly discriminate between forms, and reporting a daily emission of 1.6 × 107 microplastics to the environment. Year variability in microplastic burden was cushioned at the effluent, reporting a stable performance of the sewage plant. Eight different polymer families were identified, LDPE film being the most abundant form, with 10 different colors and sizes mainly between 1–2 mm. Future efforts should be dedicated to source control, plastic waste management, improvement of legislation, and specific microplastic-targeted treatment units, especially for microfiber removal.

scholarly journals Stormwater Runoff Treatment Using Pervious Concrete Modified with Various Nanomaterials: A Comprehensive Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8552
Author(s):  
Vahid Alimohammadi ◽  
Mehdi Maghfouri ◽  
Delaram Nourmohammadi ◽  
Pejman Azarsa ◽  
Rishi Gupta ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Compressive Strength ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Stormwater Runoff ◽  
Infiltration Rate ◽  
Stormwater Treatment ◽  
Adsorption Mechanisms ◽  
Wide Range ◽  
Adsorption Processes

Clean water is a vital need for all living creatures during their lifespan. However, contaminated stormwater is a major issue around the globe. A wide range of contaminants, including heavy metals, organic and inorganic impurities, has been discovered in stormwater. Some commonly utilized methods, such as biological, physical and chemical procedures, have been considered to overcome these issues. However, these current approaches result in moderate to low contaminant removal efficiencies for certain classes of contaminants. Of late, filtration and adsorption processes have become more featured in permeable concretes (PCs) for the treatment of stormwater. As nanoparticles have vast potential and unique characterizations, such as a higher surface area to cure polluted stormwater, employing them to improve permeable concretes’ capabilities in stormwater treatment systems is an effective way to increase filtration and adsorption mechanisms. The present study reviews the removal rate of different stormwater contaminants such as heavy metals, organic and other pollutants using nanoparticle-improved PC. The application of different kinds of nanomaterials in PC as porous media to investigate their influences on the properties of PC, including the permeability rate, compressive strength, adsorption capacity and mix design of such concrete, was also studied. The findings of this review show that different types of nanomaterials improve the removal efficiency, compressive strength and adsorption capacity and decrease the infiltration rate of PC during the stormwater treatment process. With regard to the lack of comprehensive investigation concerning the use of nanomaterials in PC to treat polluted stormwater runoff, this study reviews 242 published articles on the removal rate of different stormwater contaminants by using PC improved with nanoparticles.

scholarly journals Adsorptive and Coagulative Removal of Trace Metals from Water Using Surface Modified Sawdust-Based Cellulose Nanocrystals

J ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 193-205
Author(s):  
Opeyemi A. Oyewo ◽  
Sam Ramaila ◽  
Lydia Mavuru ◽  
Taile Leswifi ◽  
Maurice S. Onyango
Keyword(s):  
Trace Metals ◽  
Adsorption Capacity ◽  
Cellulose Nanocrystals ◽  
Inductively Coupled Plasma ◽  
Electrostatic Interactions ◽  
Natural Waters ◽  
Maximum Adsorption Capacity ◽  
Solution Ph ◽  
Major Drawback ◽  
Surface Modified

The presence of toxic metals in surface and natural waters, even at trace levels, poses a great danger to humans and the ecosystem. Although the combination of adsorption and coagulation techniques has the potential to eradicate this problem, the use of inappropriate media remains a major drawback. This study reports on the application of NaNO2/NaHCO3 modified sawdust-based cellulose nanocrystals (MCNC) as both coagulant and adsorbent for the removal of Cu, Fe and Pb from aqueous solution. The surface modified coagulants, prepared by electrostatic interactions, were characterized using Fourier transform infrared, X-ray diffraction (XRD), and scanning electron microscopy/energy-dispersive spectrometry (SEM/EDS). The amount of coagulated/adsorbed trace metals was then analysed using inductively coupled plasma atomic emission spectroscopy (ICP-AES). SEM analysis revealed the patchy and distributed floccules on Fe-flocs, which was an indication of multiple mechanisms responsible for Fe removal onto MCNC. A shift in the peak position attributed to C2H192N64O16 from 2θ = 30 to 24.5° occurred in the XRD pattern of both Pb- and Cu-flocs. Different process variables, including initial metal ions concentration (10–200 mg/L), solution pH (2–10), and temperature (25–45 °C) were studied in order to investigate how they affect the reaction process. Both Cu and Pb adsorption followed the Langmuir isotherm with a maximum adsorption capacity of 111.1 and 2.82 mg/g, respectively, whereas the adsorption of Fe was suggestive of a multilayer adsorption process; however, Fe Langmuir maximum adsorption capacity was found to be 81.96 mg/g. The sequence of trace metals removal followed the order: Cu > Fe > Pb. The utilization of this product in different water matrices is an effective way to establish their robustness.

scholarly journals Hydrothermal Synthesis of Sodalite-Type N-A-S-H from Fly Ash to Remove Ammonium and Phosphorus from Water

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 2741
Author(s):  
Pengcheng Lv ◽  
Ruihong Meng ◽  
Zhongyang Mao ◽  
Min Deng
Keyword(s):  
Fly Ash ◽  
Adsorption Capacity ◽  
Removal Rate ◽  
Kinetic Studies ◽  
Solute Concentration ◽  
Raw Material ◽  
Sodium Aluminosilicate ◽  
Equilibrium Data ◽  
One Step ◽  
Ft Ir

In this study, the hydrated sodium aluminosilicate material was synthesized by one-step hydrothermal alkaline desilication using fly ash (FA) as raw material. The synthesized materials were characterized by XRD, XRF, FT-IR and SEM. The characterization results showed that the alkali-soluble desilication successfully had synthesized the sodium aluminosilicate crystalline (N-A-S-H) phase of sodalite-type (SOD), and the modified material had good ionic affinity and adsorption capacity. In order to figure out the suitability of SOD as an adsorbent for the removal of ammonium and phosphorus from wastewater, the effects of material dosing, contact time, ambient pH and initial solute concentration on the simultaneous removal of ammonium and phosphorus are investigated by intermittent adsorption tests. Under the optimal adsorption conditions, the removal rate of ammonium was 73.3%, the removal rate of phosphate was 85.8% and the unit adsorption capacity reached 9.15 mg/L and 2.14 mg/L, respectively. Adsorption kinetic studies showed that the adsorption of ammonium and phosphorus by SOD was consistent with a quasi-secondary kinetic model. The adsorption isotherm analysis showed that the equilibrium data were in good agreement with the Langmuir and Freundlich model. According to thermodynamic calculations, the adsorption of ammonium and phosphorus was found to be a heat-absorbing and spontaneous process. Therefore, the preparation of SOD by modified FA has good adsorption properties as adsorbent and has excellent potential for application in the removal of contaminants from wastewater.

scholarly journals Enhanced Wastewater Treatment by Immobilized Enzymes

2021 ◽  
Author(s):  
Jakub Zdarta ◽  
Katarzyna Jankowska ◽  
Karolina Bachosz ◽  
Oliwia Degórska ◽  
Karolina Kaźmierczak ◽  
...  
Keyword(s):  
Wastewater Treatment ◽  
Process Optimization ◽  
Organic Pollutants ◽  
Large Scale ◽  
Removal Rate ◽  
Immobilized Enzymes ◽  
Future Research ◽  
Process Conditions ◽  
Removal Rates ◽  
Catalytic Cycles

Abstract Purpose of Review In the presented review, we have summarized recent achievements on the use of immobilized oxidoreductases for biodegradation of hazardous organic pollutants including mainly dyes, pharmaceuticals, phenols, and bisphenols. In order to facilitate process optimization and achievement of high removal rates, effect of various process conditions on biodegradation has been highlighted and discussed. Recent Findings Current reports clearly show that immobilized oxidoreductases are capable of efficient conversion of organic pollutants, usually reaching over 90% of removal rate. Further, immobilized enzymes showed great recyclability potential, allowing their reuse in numerous of catalytic cycles. Summary Collected data clearly indicates immobilized oxidoreductases as an efficient biocatalytic tools for removal of hazardous phenolic compounds, making them a promising option for future water purification. Data shows, however, that both immobilization and biodegradation conditions affect conversion efficiency; therefore, process optimization is required to achieve high removal rates. Nevertheless, we have demonstrated future trends and highlighted several issues that have to be solved in the near-future research, to facilitate large-scale application of the immobilized oxidoreductases in wastewater treatment.

scholarly journals Cooperation/Competition between Halogen Bonds and Hydrogen Bonds in Complexes of 2,6-Diaminopyridines and X-CY3 (X = Cl, Br; Y = H, F)

Symmetry ◽  
2021 ◽  
Vol 13 (5) ◽  
pp. 766
Author(s):  
Barbara Bankiewicz ◽  
Marcin Palusiak
Keyword(s):  
Complex Formation ◽  
Hydrogen Bonds ◽  
Dft Calculations ◽  
Electrostatic Interactions ◽  
Dipole Moments ◽  
Main Role ◽  
Halogen Bonds ◽  
Topological Parameters ◽  
Leading Role ◽  
The Impact

The DFT calculations have been performed on a series of two-element complexes formed by substituted 2,6-diaminopyridine (R−PDA) and pyridine (R−Pyr) with X−CY3 molecules (where X = Cl, Br and Y = H, F). The primary aim of this study was to examine the intermolecular hydrogen and halogen bonds in the condition of their mutual coexistence. Symmetry/antisymmetry of the interrelation between three individual interactions is addressed. It appears that halogen bonds play the main role in the stabilization of the structures of the selected systems. However, the occurrence of one or two hydrogen bonds was associated with the favourable geometry of the complexes. Moreover, the impact of different substituent groups attached in the para position to the aromatic ring of the 2,6-diaminopyridine and pyridine on the character of the intermolecular hydrogen and halogen bonds was examined. The results indicate that the presence of electron-donating substituents strengthens the bonds. In turn, the presence of electron-withdrawing substituents reduces the strength of halogen bonds. Additionally, when hydrogen and halogen bonds lose their leading role in the complex formation, the nonspecific electrostatic interactions between dipole moments take their place. Analysis was based on geometric, energetic, and topological parameters of the studied systems.

Screening of Coagulant for Washing Wastewater Treatment

2015 ◽  
Vol 1092-1093 ◽  
pp. 972-975
Author(s):  
Jing Yang
Keyword(s):  
Wastewater Treatment ◽  
Removal Rate ◽  
Experimental Results ◽  
The Other ◽  
Aluminium Chloride ◽  
Coagulation Tests ◽  
Cyclic Utilization ◽  
Washing Wastewater ◽  
Better Than

According to the problems exist in cyclic utilization of washing wastewater, the coagulation tests utilizing ferric trichloride (FeCl3), alums, poly aluminium chloride (PAC) and polyacrylamide (PAM) are studied, respectively. Experimental results show that PAC was much better than the other coagulants in the removal of LAS and chroma as a single coagulant. Cast 2.5mL PAC(10%) into quantitative washing wastewater, the removal rate of LAS and chroma reach 82.5% and 87.8%, respectively. When mix the every two kinds of coagulants, maintaining the same total amount of coagulant to 2.5mL, cast1.0mL PAC(10%) and 1.5mL alum (10%) into washing wastewater ,the removal rate of LAS and chroma reach 84.1% and 90.0%, respectively.

Study of Advanced Technologies of METs for Herbicides Wastewater Treatment with High Salinity

2013 ◽  
Vol 777 ◽  
pp. 326-329
Author(s):  
Tao Li Song ◽  
Xue Nong Yi ◽  
Zhi Qing Li ◽  
Xin Jin
Keyword(s):  
Wastewater Treatment ◽  
High Salinity ◽  
Removal Rate ◽  
Advanced Technologies

Experiments were conducted to study the role of enhanced micro-electrolysis techniques (METs) in treatment of s-atrazine wastewater, regarding atrazine production wastewater as the object of this research. The intensified METs methods included O3and ultrasound (US). With O3METs technology, a better result could be achieved under weak acidity condition. The highest removal rate of TOC reached 18.7%. US before METs could gain higher removal rate of 38.7% compared to the rate of 27.8% by US in METs.

scholarly journals Isolation and characterization of organic matter-degrading bacteria from coking wastewater treatment plant

2018 ◽  
Vol 78 (7) ◽  
pp. 1517-1524 ◽  
Author(s):  
Riqiang Li ◽  
Jianxing Wang ◽  
Hongjiao Li
Keyword(s):  
Organic Matter ◽  
Wastewater Treatment ◽  
Wastewater Treatment Plant ◽  
Removal Rate ◽  
Treatment Plant ◽  
Coking Wastewater ◽  
Naphthalene Degradation ◽  
Isolation And Characterization ◽  
Degrading Bacteria

Abstract As a step toward bioaugmentation of coking wastewater treatment 45 bacteria strains were isolated from the activated sludge of a coking wastewater treatment plant (WWTP). Three strains identified as Bacillus cereus, Pseudomonas synxantha, and Pseudomonas pseudoaligenes exhibited high dehydrogenase activity which indicates a strong ability to degrade organic matter. Subsequently all three strains showed high naphthalene degradation abilities. Naphthalene is a refractory compound often found in coking wastewater. For B. cereus and P. synxantha the maximum naphthalene removal rates were 60.4% and 79.8%, respectively, at an initial naphthalene concentration of 80 mg/L, temperature of 30 °C, pH of 7, a bacteria concentration of 15% (V/V), and shaking speed of 160 r/min. For P. pseudoaligenes, the maximum naphthalene removal rate was 77.4% under similar conditions but at 35 °C.

Sign in / Sign up

Export Citation Format

Share Document