Photoluminescence Properties of Core/Shell CdSe/ZnS Quantum Dots Encapsulated with Transparent layers for Third Generation Photovoltaics

2011 ◽  
Vol 1322 ◽  
Author(s):  
Bahareh Sadeghimakki ◽  
Navid Mohammad Sadeghi Jahed ◽  
Siva Sivoththaman
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Synthesis Method ◽  
Core Shell ◽  
Temperature Dependent ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Intense Luminescence ◽  
Excitonic Emission ◽  
Third Generation Photovoltaics

ABSTRACTIn this work hydrophobicaly ligated cadmium selenide/zinc sulfide CdSe/ZnS quantum dots (QDs) were incorporated in transparent matrices by formation of CdSe/ZnS/SiO2 core/shell/shell structure using microemolsion synthesis method. The optical properties of the QDs encapsulated with a chemically grown oxide layers were studied. Intense luminescence properties of the QD/silica nanoparticles (NPs) were observed using steady state photoluminescence (PL) measurements. Confocal microscopy demonstrates fluorescence of the single core/shell/shell nanoparticles. The obtained results along with the Secondary Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) images provide information on the geometry of the QDs. The excitonic emission of nanoparticles was also mapped using a liquid nitrogen cryostat the 77K - 300K range. The temperature dependent PL spectra of the film demonstrate the temperature-dependent band gap shrinkage of the QDs. PL lifetime measurements were performed on the ensemble of NPs. Experimental data was fitted to the numerical model with lifetime constants in nanoseconds range. We demonstrate that the main nonradiative processes that limit the quantum yield (QY) of the QDs at room temperature are the carrier trapping at the interface of QD/silica and the exciton-phonon coupling. These studies give us insight to exploit the QD layers for photon down shifting and multiple exciton generation for application in photovoltaics.

Preparation and Characterization of Nickel(Ni)-Silver(Ag) Core-Shell Nanoparticles for Conductive Pastes

2012 ◽  
Vol 531 ◽  
pp. 211-214 ◽  
Author(s):  
Jun Jie Jing ◽  
Ji Min Xie ◽  
Hui Ru Qin ◽  
Wen Hua Li ◽  
Ming Mei Zhang
Keyword(s):  
Electron Microscopy ◽  
Inductively Coupled Plasma ◽  
Water Solution ◽  
Average Diameter ◽  
Core Shell ◽  
Ni Nanoparticles ◽  
Shell Nanoparticles ◽  
Inductively Coupled ◽  
Transmission Electron ◽  
Core Shell Nanoparticles

Nickel(Ni)-silver(Ag) core-shell nanoparticles with different shell thickness were synthesized with Ni nanoparticles by liquid phase reduction technique form water solution. The product was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and inductively coupled plasma spectroscopy (ICP). The results showed that the Ni nanoparticles are in sphere shape and the average diameter is 104nm , the nickel(Ni)-silver(Ag) core-shell nanoparticles has good crystallinity and the thinkness of Ag nanoshells could be effectively controlled by changing the concentration of silver nitrate. The product can be used for nickel-based conductive paste preparation because of the surface character of Ag and the magnetic property of Ni

Structural Characterization of Nanoparticles Obtained by a Polyol Synthesis in the Bimetallic System Pt-Pd

2012 ◽  
Vol 1372 ◽  
Author(s):  
A. F. García-Ruiz ◽  
J. J. Velázquez Salazar ◽  
R. Esparza ◽  
N. Castillo
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Bimetallic Nanoparticles ◽  
Synthesis Method ◽  
Shell Structures ◽  
Polyol Synthesis ◽  
Core Shell ◽  
Thermal Methods ◽  
Transmission Electron ◽  
Bimetallic System

ABSTRACTA modified polyol synthesis has been utilized to study the different structures obtained in the bimetallic system of platinum (Pt) and palladium (Pd). Some results are shown in this work. Thermal methods under refluxing, carrying on the reaction up to 285 ºC, have been assayed to reduce metallic salts using ethylene glycol (EG) as reducer and polyvinylpyrrolidone (PVP) as protective reagent of the formed bimetallic nanoparticles. The special core-shell structure has been observed in these bimetallic nanoparticles, whose synthesis was assisted by Ag, showing polyhedral shapes. The average diameter size of the core has been estimated at 10 nm, and the diameter size of the shell in 13 nm, consequently the thickness of the shell is around 1.5 nm. Nanoparticles were structurally characterized with transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM) equipped with detector to generate high angle annular dark field (HAADF) images. This kind of structures have been studied and utilized to increase successfully the catalytic properties of monometallic nanoparticles of Pt or Pd according to other works. Here, the synthesis procedure is described; as the main results, several images are presented showing the obtained bimetallic core-shell structures and their fast Fourier transform (FFT), and also the size and the elemental analysis of the nanoparticles are reported, concluding that this synthesis method is very efficient for preparing bimetallic core shell structures.

In situ TEM observation of Au–Cu2O core–shell growth in liquids

Nanoscale ◽  
2019 ◽  
Vol 11 (21) ◽  
pp. 10486-10492 ◽  
Author(s):  
Fu-Chun Chen ◽  
Jui-Yuan Chen ◽  
Ya-Hsuan Lin ◽  
Ming-Yu Kuo ◽  
Yung-Jung Hsu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Shell Growth ◽  
Core Shell ◽  
In Situ Tem ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Liquid Cell ◽  
Different Shapes ◽  
Core Shell Nanoparticles

The formation of different shapes Au–Cu2O core–shell nanoparticles was investigated by in situ liquid cell transmission electron microscopy (LCTEM).

Synthesis and Characterization of Co3O4-MnxCo3-xO4 Core-Shell Nanoparticles

MRS Advances ◽  
2018 ◽  
Vol 3 (47-48) ◽  
pp. 2899-2904
Author(s):  
Ning Bian ◽  
Robert A. Mayanovic ◽  
Mourad Benamara
Keyword(s):  
Electron Microscopy ◽  
Average Particle Size ◽  
Synthesis Method ◽  
Blocking Temperature ◽  
Core Shell ◽  
Average Particle ◽  
Shell Nanoparticles ◽  
X Ray ◽  
The Core ◽  
Core Shell Nanoparticles

ABSTRACTThe mixed-valence oxide Co3O4 nanoparticles, having the normal spinel structure, possess large surface area, active-site surface adsorption properties, and fast ion diffusivities. Consequently, they are widely used in lithium-ion batteries, as well as for gas sensing and heterogeneous catalysis applications. In our research, we use a two-step method to synthesize Co3O4–based core-shell nanoparticles (CSNs). Cobalt oxide (Co3O4) nanoparticles were successfully synthesized using a wet synthesis method employing KOH and cobalt acetate. Manganese was incorporated into the Co3O4 structure to synthesize inverted Co3O4@MnxCo3-xO4 CSNs using a hydrothermal method. By adjustment of pH value, we obtained two different morphologies of CSNs, one resulting in pseudo-spherical and octahedron-shaped nanoparticles (PS type) whereas the second type predominantly have a nanoplate (NP type) morphology. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and x-ray photoelectron spectroscopy (XPS) have been performed in order to determine the morphological and structural properties of our CSNs, whereas the magnetic properties have been characterized using a superconducting quantum interference device (SQUID) magnetometer. XRD and TEM results show that the CSNs have the same spinel crystal structure throughout the core and shell with an average particle size of ∼19.8 nm. Our Co3O4 nanoparticles, as measured prior to CSN formation, are shown to be antiferromagnetic (AFM) in nature as shown by the magnetization data. Our SQUID data indicate that the core-shell nanoparticles have both AFM (due to the Co3O4 core) and ferrimagnetic properties (of the shell) with a coercivity field of 300 Oe and 150 Oe at 5 K for the PS and NP samples, respectively. The magnetization vs temperature data show a spin order-disorder transition at ∼33 K and a superparamagnetic blocking temperature of ∼90 K for both batches.

Synthesis and Optical Properties of CdSe and CdSe/ZnS Core/Shell Quantum Dots

2015 ◽  
Vol 1085 ◽  
pp. 176-181
Author(s):  
Puspendu Barik ◽  
Arup Ratan Mandal ◽  
Denis V. Kuznetsov ◽  
Anna Yu. Godymchuk
Keyword(s):  
Electron Microscopy ◽  
Quantum Dots ◽  
Excitation Wavelength ◽  
Core Shell ◽  
Shell Material ◽  
X Ray Diffraction ◽  
Chemical Route ◽  
X Ray ◽  
The Core ◽  
Transmission Electron

In this work, we have synthesized homogeneous, ordered CdSe and CdSe/ZnS core/shell quantum dots (QDs) by chemical route and characterized them using X-ray diffraction (XRD), transmission electron microscopy (TEM), dynamic light scattering (DLS), and Photoluminescence (PL) spectroscopy. Coating with shell material was confirmed by red shift as well as enhancement in the PL peak compared to bare QDs. DLS data showed QDs and core/shell to be stable. PL spectra are red shifted relative to the excitation wavelength. Bare QDs and the core/shell material shows a Stoke-shift of 16 and 18 meV respectively.

scholarly journals Synthesis, Characterization and Dye Removal Behavior of Core–Shell–Shell Fe3O4/Ag/Polyoxometalates Ternary Nanocomposites

Nanomaterials ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 1255 ◽  
Author(s):  
Shixia Zhan ◽  
Chunyan Li ◽  
Heyun Tian ◽  
Chenguang Ma ◽  
Hongling Liu ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Magnetic Properties ◽  
Removal Efficiency ◽  
Dye Removal ◽  
Physical Property Measurement System ◽  
Core Shell ◽  
Shell Nanoparticles ◽  
Transmission Electron ◽  
Vis Spectroscopy

The ternary nanocomposites Fe3O4/Ag/polyoxometalates (Fe3O4/Ag/POMs) with core–shell–core nanostructure were synthesized by coating [Cu(C6H6N2O)2(H2O)]H2[Cu(C6H6N2O)2(P2Mo5O23)]·4H2O polyoxometalates on the surface of Fe3O4/Ag (core–shell) nanoparticles. The transmission electron microscopy/high resolution transmission electron microscopy (HR-TEM) and X-ray powder diffraction (XRD) analyses show that the Fe3O4/Ag/POMs ternary nanocomposites reveal a core–shell–core nanostructure, good dispersibility, and high crystallinity. The vibrating sample magnetometer (VSM) and physical property measurement system (PPMS) demonstrated the good magnetic properties and superparamagnetic behavior of the nanocomposites at 300 K. The UV–vis spectroscopy displayed the broadband absorption of the Fe3O4/Ag/POMs with the maximum surface plasmon resonance of Ag nanostructure around 420 nm. The dye removal capacity of Fe3O4/Ag/POMs was investigated using methylene blue (MB) as a probe. Through adsorption and photocatalysis, the nanocomposites could quickly remove MB with a removal efficiency of 98.7% under the irradiation of visible light at room temperature. The removal efficiency was still as high as 97.5% even after six runs by magnetic separation of photocatalytic adsorbents after processing, indicating the reusability and high stability of the nanocomposites. These Fe3O4/Ag/POMs photocatalytic adsorbents with magnetic properties will hopefully become a functional material for wastewater treatment in the future.

Sign in / Sign up

Export Citation Format

Share Document