scholarly journals Materials research and development needs to enable efficient and electrified buildings

MRS Bulletin ◽  
2022 ◽  
Author(s):  
Shuang Cui ◽  
Adewale Odukomaiya ◽  
Judith Vidal

Abstract Because of the complexity of modern buildings—with many interconnected materials, components, and systems—fully electrifying buildings will require targeted R&D and efficient coordination across those material, component, and system levels. Because buildings that consume the smallest amount of energy are easier to electrify, energy efficiency is a crucial step toward fully electrified buildings. Materials advances will play an important role in both reducing the energy intensity of buildings and electrifying their remaining energy use. Materials are currently being explored, discovered, synthesized, evaluated, optimized, and implemented across many building components, including solid-state lighting; dynamic windows and opaque envelopes; cold climate heat pumps; thermal energy storage; heating, ventilating, and air conditioning (HVAC); refrigeration; non-vapor compression HVAC; and more. In this article, we review the current state-of-the-art of materials for various buildings end uses and discuss R&D challenges and opportunities for both efficiency and electrification. Graphical abstract

2021 ◽  
Vol 298 ◽  
pp. 126799
Author(s):  
S. Smitt ◽  
I. Tolstorebrov ◽  
P. Gullo ◽  
A. Pardiñas ◽  
A. Hafner
Keyword(s):  

Author(s):  
Nehemiah Emaikwu ◽  
David Catalini ◽  
Jan Muehlbauer ◽  
Yunho Hwang ◽  
Ichiro Takeuchi ◽  
...  

Abstract Heat pumps based on the vapor compression cycle account for a significant portion of energy use around the world. However, growing demands for energy efficient and environmentally friendly technologies have created a need for new space conditioning approaches. Novel systems which use elastocaloric material have shown potential to replace traditional vapor compression due to high energy efficiency and use of environmentally friendly, solid-state refrigerants. The solid-state refrigerants exhibit the elastocaloric effect, a phenomenon that occurs when metal alloys experience stress-induced reversible phase transformations resulting in latent heat release or absorption. Prototypes built in the Center for Environmental Energy Engineering have utilized the active elastocaloric regeneration (AER) operating method to develop high temperature gradients between the ends of a regenerative heat exchanger made of tubular elastocaloric material. Though this schema significantly increases the temperature span developed by elastocaloric cooling devices, the current heat pump design leads to temperature degradation as a result of conduction along the length of the tubes in the regenerator. The novel regenerator concept presented in this work mitigates that issue by using short, thermally insulated tubes layers which also enables fluid flow over external surface areas of the material.


2001 ◽  
Author(s):  
Srinivas Garimella

Abstract This paper discusses several different approaches to increase the energy efficiency and decrease the environmental impact of space-conditioning systems. The use of microchannel components and hydronic coupling is presented as a method to drastically reduce the size and refrigerant inventories of the refrigerant-carrying components of vapor-compression heat pumps. Design aspects of heat pumps using carbon dioxide, a natural refrigerant with minimal environmental impact, are discussed, and novel component geometries that offer compactness are presented. The advantages of absorption heat pumps using waste heat and natural gas are discussed, and innovative component designs are presented. It is believed that these innovations will hasten the commercialization of these environmentally benign alternatives to CFC- and HCFC-based vapor-compression systems. The environmental benefits of waste heat-driven absorption chillers are quantified in terms of the energy savings, greenhouse gas emission reductions, and installed electric power reductions. Ground coupling of these heat pumps is also discussed, with specific examples of the performance improvement over similar air-coupled heat pumps.


2021 ◽  
Vol 246 ◽  
pp. 06004
Author(s):  
Alex Lachance ◽  
Justin Tamasauskas ◽  
Stéphanie Breton ◽  
Solange Prud’homme

Cold climate air-to-air heat pumps (CCHP) offer a strong potential for energy use reductions in Canadian homes. Proper selection of the unit is critical in order to take advantage of the improved efficiency and increased heat capacity at low ambient temperatures and ability to modulate to meet a wide range of heating loads. A new performance rating procedure (CSA EXP07) was developed to better represent the seasonal energy efficiency of CCHP systems versus current test procedures that do not always accurately characterize the response to dynamic loads in a colder climate zones, thus resulting in inaccurate equipment rating. To validate the representativeness of the new performance rating procedure and quantify the potential over-or underestimation of energy savings using current performance rating procedures, a CCHP data-driven model is developed and simulated in a code-compliant single-detached Canadian home for different climate regions: Marine, Cold-Humid, Cold-Dry, Very-Cold and Subarctic. These energy models then serve as the basis for comparing the seasonal heating coefficient of performance of a CCHP system, which can be compared to the current and newly proposed performance rating procedure.


Author(s):  
Elias Marvinney ◽  
Alissa Kendall

Abstract Purpose California’s Central Valley produces more than 75% of global commercial almond supply, making the life cycle performance of almond production in California of global interest. This article describes the life cycle assessment of California almond production using a Scalable, Process-based, Agronomically Responsive Cropping System Life Cycle Assessment (SPARCS-LCA) model that includes crop responses to orchard management and modeling of California’s water supply and biomass energy infrastructure. Methods A spatially and temporally resolved LCA model was developed to reflect the regional climate, resource, and agronomic conditions across California’s Central Valley by hydrologic subregion (San Joaquin Valley, Sacramento Valley, and Tulare Lake regions). The model couples a LCA framework with region-specific data, including water supply infrastructure and economics, crop productivity response models, and dynamic co-product markets, to characterize the environmental performance of California almonds. Previous LCAs of California almond found that irrigation and management of co-products were most influential in determining life cycle CO2eq emissions and energy intensity of California almond production, and both have experienced extensive changes since previous studies due to drought and changing regulatory conditions, making them a focus of sensitivity and scenario analysis. Results and discussion Results using economic allocation show that 1 kg of hulled, brown-skin almond kernel at post-harvest facility gate causes 1.92 kg CO2eq (GWP100), 50.9 MJ energy use, and 4820 L freshwater use, with regional ranges of 2.0–2.69 kg CO2eq, 42.7–59.4 MJ, and 4540–5150 L, respectively. With a substitution approach for co-product allocation, 1 kg almond kernel results in 1.23 kg CO2eq, 18.05 MJ energy use, and 4804 L freshwater use, with regional ranges of 0.51–1.95 kg CO2eq, 3.68–36.5 MJ, and 4521–5140 L, respectively. Almond freshwater use is comparable with other nut crops in California and globally. Results showed significant variability across subregions. While the San Joaquin Valley performed best in most impact categories, the Tulare Lake region produced the lowest eutrophication impacts. Conclusion While CO2eq and energy intensity of almond production increased over previous estimates, so too did credits to the system for displacement of dairy feed. These changes result from a more comprehensive model scope and improved assumptions, as well as drought-related increases in groundwater depth and associated energy demand, and decreased utilization of biomass residues for energy recovery due to closure of bioenergy plants in California. The variation among different impact categories between subregions and over time highlight the need for spatially and temporally resolved agricultural LCA.


Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4625
Author(s):  
Alisa Freyre ◽  
Stefano Cozza ◽  
Matthias Rüetschi ◽  
Meinrad Bürer ◽  
Marlyne Sahakian ◽  
...  

In this paper, we perform a literature review on the current state of knowledge about homeowners in the context of the adoption of renewable heating systems. Despite a considerable number of studies about homeowners, homeowner–installer interactions, and ways to improve the effectiveness of renewable heating programs, based on homeowner knowledge, have not yet been studied in much detail. To address these knowledge gaps, we conduct a qualitative study on single-family house owners who installed heat pumps and took part in a renewable heating program in Geneva, Switzerland. We cover homeowner practices in choosing installers and heating system types, homeowners’ feedback about heat pump installation and use, as well as their experience in participation in the renewable heating program. Based on the literature review and the findings from the interviews, we provide the following recommendations on how to increase the effectiveness of renewable heating programs: (a) support for homeowners should not be limited to financial incentives; (b) partnership programs with installers could help to increase the quality of installation services and enable homeowners to choose qualified installers; and (c) assisting homeowners in pre-qualification and ex-post analysis, in learning how to operate their renewable heating systems and in solving problems during the post-installation period, can contribute to improved technology reputation, which can, in turn, increase technology uptake by other homeowners.


1997 ◽  
Vol 119 (2) ◽  
pp. 183-191 ◽  
Author(s):  
Xiang-Dong He ◽  
Sheng Liu ◽  
Haruhiko H. Asada

This paper presents a new lumped-parameter model for describing the dynamics of vapor compression cycles. In particular, the dynamics associated with the two heat exchangers, i.e., the evaporator and the condenser, are modeled based on a moving-interface approach by which the position of the two-phase/single-phase interface inside the one-dimensional heat exchanger can be properly predicted. This interface information has never been included in previous lumped-parameter models developed for control design purpose, although it is essential in predicting the refrigerant superheat or subcool value. This model relates critical performance outputs, such as evaporating pressure, condensing pressure, and the refrigerant superheat, to actuating inputs including compressor speed, fan speed, and expansion valve opening. The dominating dynamic characteristics of the cycle around an operating point is studied based on the linearized model. From the resultant transfer function matrix, an interaction measure based on the Relative Gain Array reveals strong cross-couplings between various input-output pairs, and therefore indicates the inadequacy of independent SISO control techniques. In view of regulating multiple performance outputs in modern heat pumps and air-conditioning systems, this model is highly useful for design of multivariable feedback control.


Author(s):  
José A. Camacho ◽  
Lucas da Silva Almeida ◽  
Mercedes Rodríguez ◽  
Jesús Molina

AbstractIn order to adequately assess energy policies and set clear objectives, a key preliminary step is to know the energy use patterns of the different countries. This paper estimates the evolution of the total energy use over the period 1995–2015 in four European Union (EU) countries, the Czech Republic, Hungary, Italy, and Spain, representative of two different energy patterns, the “Southern” one and the “Eastern” one. For doing so, we employ a Multi-Regional Input Output (MRIO) model. In difference with previous studies, in addition to differentiate between domestic and foreign use we distinguish whether this energy is produced domestically or abroad. The results obtained show a certain convergence in energy intensity across the four countries examined because of the radical transformations experienced by the Czech Republic and Hungary. Nonetheless, energy intensities are still substantially higher in Eastern than in Southern countries which confirms that the first group of countries have still a long road to go, especially regarding the incentives that their industries have to use energy efficiently. Taking our decomposition of total energy use, the reductions in total energy use were mainly caused by a high decrease in the importance of the domestic use of energy produced domestically. At the same time, a growing importance of the role played by the energy produced abroad was observed. These trends confirm the great importance of global value chains and the steady internalization of energy use. This methodology could be further applied to other countries.


2021 ◽  
Vol 12 (4) ◽  
pp. 35-42
Author(s):  
Thomas Alan Woolman ◽  
Philip Lee

There are significant challenges and opportunities facing the economies of the United States in the coming decades of the 21st century that are being driven by elements of technological unemployment. Deep learning systems, an advanced form of machine learning that is often referred to as artificial intelligence, is presently reshaping many aspects of traditional digital communication technology employment, primarily network system administration and network security system design and maintenance. This paper provides an overview of the current state-of-the-art developments associated with deep learning and artificial intelligence and the ongoing revolutions that this technology is having not only on the field of digital communication systems but also related technology fields. This paper will also explore issues and concerns related to past technological unemployment challenges, as well as opportunities that may be present as a result of these ongoing technological upheavals.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Stuti Haldar ◽  
Gautam Sharma

Purpose The purpose of this study is to investigate the impacts of urbanization on per capita energy consumption and emissions in India. Design/methodology/approach The present study analyses the effects of urbanization on energy consumption patterns by using the Stochastic Impacts by Regression on Population, Affluence and Technology in India. Time series data from the period of 1960 to 2015 has been considered for the analysis. Variables including Population, GDP per capita, Energy intensity, share of industry in GDP, share of Services in GDP, total energy use and urbanization from World Bank data sources have been used for investigating the relationship between urbanization, affluence and energy use. Findings Energy demand is positively related to affluence (economic growth). Further the results of the analysis also suggest that, as urbanization, GDP and population are bound to increase in the future, consequently resulting in increased carbon dioxide emissions caused by increased energy demand and consumption. Thus, reducing the energy intensity is key to energy security and lower carbon dioxide emissions for India. Research limitations/implications The study will have important policy implications for India’s energy sector transition toward non- conventional, clean energy sources in the wake of growing share of its population residing in urban spaces. Originality/value There are limited number of studies considering the impacts of population density on per capita energy use. So this study also contributes methodologically by establishing per capita energy use as a function of population density and technology (i.e. growth rates of industrial and service sector).


Sign in / Sign up

Export Citation Format

Share Document