scholarly journals Improving the photobioreactor operation efficiency in the technological scheme of wastewater treatment

2021 ◽  
Vol 6 (10 (114)) ◽  
pp. 6-15
Author(s):  
Sergii Shamanskyi ◽  
Sergii Boichenko ◽  
Viktoria Khrutba ◽  
Olena Barabash ◽  
Iryna Shkilniuk ◽  
...  
Keyword(s):  
Euglena Gracilis ◽  
Experimental Studies ◽  
Ammonium Nitrogen ◽  
Sewage Water ◽  
Process Efficiency ◽  
Municipal Sewage ◽  
Biogenic Elements ◽  
Working Zone ◽  
Advantages And Disadvantages ◽  
Low Efficiency

Conventional process schemes of municipal sewage water treatment, advantages, and disadvantages of the methods applied when removing biogenic elements were considered. It was shown that the existing shortcomings cause additional explicit costs and difficulties when disposing of the resulting waste. Low efficiency of the removal processes themselves causing residual concentrations of biogenic elements in the treated sewage water was also shown. A process scheme for treating municipal sewage water was proposed. It includes the use of a photobioreactor of a proposed design for the removal of biogenic elements due to the metabolism of microalgae. It was experimentally shown that the use of Euglena gracilis strain for removal of phosphates in initial concentrations of 4, 7, and 14 mg/dm3 from sewage water is the most efficient way. It makes it possible to reduce these concentrations to residual 0…0.55 mg/dm3 in four days. A 3.75…5.58 times increment of microalgae biomass during this period was also shown. A mathematical model was constructed for calculating the time of staying the sewage water and microalgae mixture in a photobioreactor to achieve the required degree of removal of biogenic elements. Based on the proposed model and experimental studies, the required time of staying in the rector working area was calculated. It was shown that with the use of Euglena gracilis strain but without removal of biogenic elements at previous purification stages (process schemes including only mechanical purification), the time of mixture staying in the working zone was 37.81 hrs. With partial removal of biogenic elements at the stage of biological treatment (0.55 mg/dm3 total nitrogen, 0.91 mg/dm3 ammonium nitrogen, 0.44 mg/dm3 phosphates), this time was reduced to 26.66 hrs. It was found that the use of Euglena gracilis strain instead of Chlorella vulgaris (FC-16) in the removal of phosphates results in a 2-time increase in the process efficiency and a 50 % decrease in time of mixture staying in the working zone. Recommendations for calculating geometric parameters of photobioreactors of the proposed design were given for use in the process schemes

Experimental Studies Concerning the Semipermeable Membrane Separation Efficiency for 134Cs, 137Cs, 57Co, 58Co, 60Co, 54Mn in Liquid Radioactive Waste I. Treatment of secondary waste from POD decontamination procedure

2008 ◽  
Vol 59 (5) ◽  
Author(s):  
Mirela Dulama ◽  
Nicoleta Deneanu ◽  
Cristian Dulama ◽  
Margarit Pavelescu
Keyword(s):  
Membrane Separation ◽  
Separation Efficiency ◽  
Liquid Radioactive Waste ◽  
Experimental Studies ◽  
Experimental Tests ◽  
Suspended Solid ◽  
Process Efficiency ◽  
Active Charcoal ◽  
Precipitation Process ◽  
Pre Treatment

The paper presents the experimental tests concerning the treatment by membrane techniques of radioactive aqueous waste. Solutions, which have been treated by using the bench-scale installation, were radioactive simulated secondary wastes from the decontamination process with modified POD. Generally, an increasing of the retention is observed for most of the contaminants in the reverse osmosis experiments with pre-treatment steps. The main reason for taking a chemical treatment approach was to selectively remove soluble contaminants from the waste. In the optimization part of the precipitation step, several precipitation processes were compared. Based on this comparison, mixed [Fe(CN)6]4-/Al3+/Fe2+ was selected as a precipitation process applicable for precipitation of radionuclides and flocculation of suspended solid. Increased efficiencies for cesium radionuclides removal were obtained in natural zeolite adsorption pre-treatment stages and this was due to the fact that volcanic tuff used has a special affinity for this element. Usually, the addition of powdered active charcoal serves as an advanced purifying method used to remove organic compounds and residual radionuclides; thus by analyzing the experimental data (for POD wastes) one can observe a decreasing of about 50% for cobalt isotopes subsequently to the active charcoal adsorption.. The semipermeable membranes were used, which were prepared by the researchers from the Research Center for Macromolecular Materials and Membranes, Bucharest. The process efficiency was monitored by gamma spectrometry.

scholarly journals Application of Bar Adsorptive Microextraction for the Determination of Levels of Tricyclic Antidepressants in Urine Samples

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3101
Author(s):  
Mariana N. Oliveira ◽  
Oriana C. Gonçalves ◽  
Samir M. Ahmad ◽  
Jaderson K. Schneider ◽  
Laiza C. Krause ◽  
...  
Keyword(s):  
Tricyclic Antidepressants ◽  
Matrix Effects ◽  
Activated Carbons ◽  
Process Efficiency ◽  
Gas Chromatography Mass Spectrometry ◽  
Selected Ion Monitoring ◽  
Experimental Conditions ◽  
Analytical Methodology ◽  
Low Efficiency

This work entailed the development, optimization, validation, and application of a novel analytical approach, using the bar adsorptive microextraction technique (BAμE), for the determination of the six most common tricyclic antidepressants (TCAs; amitriptyline, mianserin, trimipramine, imipramine, mirtazapine and dosulepin) in urine matrices. To achieve this goal, we employed, for the first time, new generation microextraction devices coated with convenient sorbent phases, polymers and novel activated carbons prepared from biomaterial waste, in combination with large-volume-injection gas chromatography-mass spectrometry operating in selected-ion monitoring mode (LVI-GC-MS(SIM)). Preliminary assays on sorbent coatings, showed that the polymeric phases present a much more effective performance, as the tested biosorbents exhibited low efficiency for application in microextraction techniques. By using BAμE coated with C18 polymer, under optimized experimental conditions, the detection limits achieved for the six TCAs ranged from 0.2 to 1.6 μg L−1 and, weighted linear regressions resulted in remarkable linearity (r2 > 0.9960) between 10.0 and 1000.0 μg L−1. The developed analytical methodology (BAμE(C18)/LVI-GC-MS(SIM)) provided suitable matrix effects (90.2–112.9%, RSD ≤ 13.9%), high recovery yields (92.3–111.5%, RSD ≤ 12.3%) and a remarkable overall process efficiency (ranging from 84.9% to 124.3%, RSD ≤ 13.9%). The developed and validated methodology was successfully applied for screening the six TCAs in real urine matrices. The proposed analytical methodology proved to be an eco-user-friendly approach to monitor trace levels of TCAs in complex urine matrices and an outstanding analytical alternative in comparison with other microextraction-based techniques.

Experimental Studies on Axially Loaded Concrete Columns Confined by Different Materials

2008 ◽  
Vol 400-402 ◽  
pp. 513-518 ◽  
Author(s):  
Yong Chang Guo ◽  
Pei Yan Huang ◽  
Yang Yang ◽  
Li Juan Li
Keyword(s):  
Bearing Capacity ◽  
Glass Fiber ◽  
Failure Modes ◽  
Experimental Studies ◽  
Concrete Columns ◽  
Steel Tube ◽  
Ultimate Bearing Capacity ◽  
Advantages And Disadvantages ◽  
Axially Loaded ◽  
Normal Strength

The improvement of the load carrying capacity of concrete columns under a triaxial compressive stress results from the strain restriction. Under a triaxial stress state, the capacity of the deformation of concrete is greatly decreased with the increase of the side compression. Therefore, confining the deformation in the lateral orientation is an effective way to improve the strength and ductility of concrete columns. This paper carried out an experimental investigation on axially loaded normal strength concrete columns confined by 10 different types of materials, including steel tube, glass fiber confined steel tube (GFRP), PVC tube, carbon fiber confined PVC tube (CFRP), glass fiber confined PVC tube (GFRP), CFRP, GFRP, polyethylene (PE), PE hybrid CFRP and PE hybrid GFRP. The deformation, macroscopical deformation characters, failure mechanism and failure modes are studied in this paper. The ultimate bearing capacity of these 10 types of confined concrete columns and the influences of the confining materials on the ultimate bearing capacity are obtained. The advantages and disadvantages of these 10 types of confining methods are compared.

Think about it – can portrayals of homosexuality in advertising prime consumer-perceived social connectedness and empathy?

2017 ◽  
Vol 51 (1) ◽  
pp. 82-98 ◽  
Author(s):  
Nina Åkestam ◽  
Sara Rosengren ◽  
Micael Dahlen
Keyword(s):  
Design Methodology ◽  
Social Connectedness ◽  
Experimental Studies ◽  
Social Effects ◽  
Attitudes Toward Homosexuality ◽  
Content Type ◽  
Advantages And Disadvantages ◽  
Thought Listing ◽  
Societal Level ◽  
Practical Implications

Purpose This paper aims to investigate whether portrayals of homosexuality in advertising can generate social effects in terms of consumer-perceived social connectedness and empathy. Design/methodology/approach In three experimental studies, the effects of advertising portrayals of homosexuality were compared to advertising portrayals of heterosexuality. Study 1 uses a thought-listing exercise to explore whether portrayals of homosexuality (vs heterosexuality) can evoke more other-related thoughts and whether such portrayals affect consumer-perceived social connectedness and empathy. Study 2 replicates the findings while introducing attitudes toward homosexuality as a boundary condition and measuring traditional advertising effects. Study 3 replicates the findings while controlling for gender, perceived similarity and targetedness. Findings The results show that portrayals of homosexuality in advertising can prime consumers to think about other people, thereby affecting them socially. In line with previous studies of portrayals of homosexuality in advertising, these effects are moderated by attitudes toward homosexuality. Research limitations/implications This paper adds to a growing body of literature on the potentially positive extended effects of advertising. They also challenge some of the previous findings regarding homosexuality in advertising. Practical implications The finding that portrayals of homosexuality in advertising can (at least, temporarily) affect consumers socially in terms of social connectedness and empathy should encourage marketers to explore the possibilities of creating advertising that benefits consumers and brands alike. Originality/value The paper challenges the idea that the extended effects of advertising have to be negative. By showing how portrayals of homosexuality can increase social connectedness and empathy, it adds to the discussion of the advantages and disadvantages of advertising on a societal level.

scholarly journals An Application of Computational Fluid Dynamics to Optimize Municipal Sewage Networks; A Case of Tororo Municipality, Eastern Uganda.

2020 ◽  
Vol 18 ◽  
pp. 18-27
Author(s):  
Twaibu Semwogerere ◽  
R. Awichi ◽  
J. D. Lwanyaga ◽  
Esemu Joseph Noah ◽  
Verdiana G. Masanja ◽  
...  
Keyword(s):  
Stokes Equations ◽  
Liquid Velocity ◽  
Free Water ◽  
Sewage Water ◽  
Transport Systems ◽  
Municipal Sewage ◽  
Surface Model ◽  
Two Phase ◽  
Mixture Flow ◽  
Sewer Network

Two-phase pipe flow is a common occurrence in many industrial applications such as sewage, water, oil, and gas transportation. Accurate prediction of liquid velocity, holdup and pressure drop is of vast importance to ensure effective design and operation of fluid transport systems. This paper aimed at the simulation of a two-phase flow of air and sewage (water) using an open source software OpenFOAM. Numerical Simulations have been performed using varying dimensions of pipes as well as their inclinations. Specifically, a Standard k- turbulence model and the Volume of Fluid (VOF) free water surface model is used to solve the turbulent mixture flow of air and sewage (water). A two dimensional, 0.5m diameter pipe of 20m length is used for the CFD approach based on the Navier-Stokes equations. Results showed that the flow pattern behaviour is influenced by the pipe diameters as well as their inclination. It is concluded that the most effective way to optimize a sewer network system for Tororo Municipality conditions and other similar situations, is by adjusting sewer diameters and slope gradients and expanding the number of sewer network connections of household and industries from 535 (i.e., 31.2% of total) to at least 1,200 (70% of total).

scholarly journals Investigation of a Turbogenerator Based on the Vortex Expansion Machine with a Peripheral Side Channel

2021 ◽  
Vol 8 (1) ◽  
pp. F11-F18
Author(s):  
S.M. Vaneev ◽  
V.S. Martsynkovskyy ◽  
A. Kulikov ◽  
D.V. Miroshnichenko ◽  
Ya.І. Bilyk ◽  
...  
Keyword(s):  
Electricity Generation ◽  
Experimental Studies ◽  
Geometric Parameters ◽  
Working Fluid ◽  
Advantages And Disadvantages ◽  
Lateral Channel ◽  
Different Types ◽  
Flow Part ◽  
Special Stand ◽  
Constant Improvement

The creation of energy-saving turbogenerators is an essential component of the development of small energy systems. The gradual growth of interest in distributed electricity generation necessitates the constant improvement of these units. Moreover, they implement a more environmentally friendly generation method than when using microturbine units that use fuel to carry out the work process. Nowadays, turbogenerators are created based on different types of expansion machines, which have their advantages and disadvantages, given in this article. Compared to competitors, vortex expansion machines have good prospects and the necessary potential to expand their research and produce turbogenerators. An experimental vortex expansion machine with a peripheral-lateral channel and ability to change the geometric parameters of its flowing part was created to meet these needs. Experimental studies of the machine were performed on a special stand with air as a working fluid. As a result of the tests, the data were successfully obtained and processed. They are presented in the form of tables and graphical dependencies. The nature of the influence of thermodynamic parameters and geometric parameters of the flow part on the efficiency of the vortex expansion machine and turbogenerator based on it to further improve and create new turbogenerators is clarified.

scholarly journals Physico-technical approach to design of composites from mineral and polymer technogenic resources

2015 ◽  
Vol 1 ◽  
pp. 162 ◽  
Author(s):  
Gotfrīds Noviks
Keyword(s):  
Composite Materials ◽  
Experimental Studies ◽  
Process Efficiency ◽  
Operating Characteristics ◽  
Forming Process ◽  
Polymer Waste ◽  
Composite Forming ◽  
Different Types ◽  
Low Levels

<p class="R-AbstractKeywords"><span lang="EN-US">Artificial composite materials are currently being produced in large quantities, they are diverse and they are widely used in the economy. There have been extensive theoretical and experimental studies of different types of components, developed the calculation methods of composites production with predefined properties.</span></p><p class="R-AbstractKeywords"><span lang="EN-US">At the same time industry produces a lot of mineral and polymer waste, which are practically technogenic resources, but their use is currently at quite low levels. The paper examines the possibilities to use technogenic resources- mineral (such as ash and clay) and organic (polymers -PET containers) for producing qualitative composite materials. For this purpose theoretical analysis and calculations of the physical properties of components and process parameters that determine the operating characteristics of the composite material were carried out.</span></p><p class="R-AbstractKeywords"><span lang="EN-US">Composite-forming process efficiency determinative parameters were analysed: adhesion, the specific surface energy, specific free surface, adsorption capacity and the degree of dispersion of the particles.</span></p><p class="R-AbstractKeywords"><span lang="EN-US">The role of external factors in processing of composite were examined – temperature, concentration of components.</span></p><p class="R-AbstractKeywords"><span lang="EN-US">The characteristics of prepared samples of composites showed the possibility to use these waste for the development of qualitative products for different purposes.</span></p>

scholarly journals Visual odometry in local underwater navigation problems

2021 ◽  
Vol 2091 (1) ◽  
pp. 012053
Author(s):  
I M Azhmukhamedov ◽  
P I Tamkov ◽  
N D Svishchev ◽  
A V Rybakov
Keyword(s):  
Experimental Studies ◽  
Visual Odometry ◽  
Ecological Monitoring ◽  
Video Stream ◽  
Video Data ◽  
Work Processes ◽  
Underwater Robots ◽  
Advantages And Disadvantages ◽  
Local Navigation ◽  
Slam Algorithm

Abstract The work processes of the ORB-SLAM algorithm are presented. The results of experimental studies on temporal comparisons of the operation of the algorithm with different parameters and cameras are presented. The necessity of forming a visual odometry (VO) system as a local navigation of remote-controlled and autonomous underwater robots has been substantiated. The two most suitable odometry methods in the underwater environment are described, such as their advantages and disadvantages. The work processes of the ORB-SLAM algorithm are presented. The results of experimental studies on temporal comparisons of the operation of the algorithm with different parameters and cameras are presented. The procedure for preparing video data is described: processing a video stream, adjusting camera parameters for calibration. The experiments represent the testing of the ORB-SLAM3 algorithm on a sample of video filmed as part of the ecological monitoring of the Caspian shelf in 2020.

THE STATUS OF RECYCLING OF ORGANIC WASTE ON THE POULTRY FARM «MIKHNEVSKAYA»

2019 ◽  
Vol 1 (2) ◽  
pp. 198-204
Author(s):  
Yu. M. Subbotina ◽  
Keyword(s):  
Pathogenic Bacteria ◽  
Aquatic Vegetation ◽  
Experimental Studies ◽  
Sewage Water ◽  
Poultry Farm ◽  
Fish Ponds ◽  
Seed Material ◽  
Higher Aquatic Vegetation ◽  
The Status ◽  
Poultry Wastewater

The article deals with the problem of recycling in poultry farm Mikhnevskaya. The work program provided for the continuation of studies on the development of the system of pond preparation of sewage water in biological ponds of purification. As one of the options, the systems of BOCS ponds (biological oxidation contact stabilization ponds) and ponds with higher aquatic vegetation, as a system of posttreatment of wastewater, as well as the use of fish ponds were proposed. The development of devices that provide deeutrophication of decontaminated wastewater in the BOCS ponds was started. As measures that contributed to the improvement of water purification to be discharged into the environment, an attempt was made to introduce at the final stages of purification of the algobacterial complex, higher aquatic vegetation, and fish seed material. A survey of the poultry farm was conducted; the conditions of wastewater formation of the Mikhnevskaya poultry farm of Stupinsky district of the Moscow region were studied. Model experiments were carried out at the Mikhnevskaya poultry farm in laboratory and semi-production conditions, directly in the laboratory of the Institute at the facility. In the course of experimental studies it was found that in the ponds under the influence of algological complex of microalgae was the process of purification and disinfection of poultry wastewater. The total death of pathogenic bacteria of the E. coli group occurred on 6-11 days after the introduction of microalgae into the water of the algal pond, which does not contradict the existing developments. At the same time, there was still an increase in fish seed material, which was sufficiently provided with food and by the autumn reached a mass of 410 grams.

scholarly journals Shock – Classification and Pathophysiological Principles of Therapeutics

2019 ◽  
Vol 15 (2) ◽  
pp. 102-113 ◽  
Author(s):  
Olga N. Kislitsina ◽  
Jonathan D. Rich ◽  
Jane E. Wilcox ◽  
Duc T. Pham ◽  
Andrei Churyla ◽  
...  
Keyword(s):  
Septic Shock ◽  
Clinical Trials ◽  
Hypovolemic Shock ◽  
Experimental Studies ◽  
Shock Therapy ◽  
Advantages And Disadvantages ◽  
Clinical Presentations ◽  
Endogenous Catecholamines ◽  
Omecamtiv Mecarbil ◽  
Vasopressor Agents

The management of patients with shock is extremely challenging because of the myriad of possible clinical presentations in cardiogenic shock, septic shock and hypovolemic shock and the limitations of contemporary therapeutic options. The treatment of shock includes the administration of endogenous catecholamines (epinephrine, norepinephrine, and dopamine) as well as various vasopressor agents that have shown efficacy in the treatment of the various types of shock. In addition to the endogenous catecholamines, dobutamine, isoproterenol, phenylephrine, and milrinone have served as the mainstays of shock therapy for several decades. Recently, experimental studies have suggested that newer agents such as vasopressin, selepressin, calcium-sensitizing agents like levosimendan, cardiac-specific myosin activators like omecamtiv mecarbil (OM), istaroxime, and natriuretic peptides like nesiritide can enhance shock therapy, especially when shock presents a more complex clinical picture than normal. However, their ability to improve clinical outcomes remains to be proven. It is the purpose of this review to describe the mechanism of action, dosage requirements, advantages and disadvantages, and specific indications and contraindications for the use of each of these catecholamines and vasopressors, as well as to elucidate the most important clinical trials that serve as the basis of contemporary shock therapy.

Sign in / Sign up

Export Citation Format

Share Document