scholarly journals Research of the stress-strain state of a workpiece under the double bending by the pulse loading

2021 ◽  
Vol 4 (1(60)) ◽  
pp. 31-36
Author(s):  
Sergii Shlyk ◽  
Volodymyr Drahobetskyi ◽  
Alexander Shapoval ◽  
Dmytro Savielov ◽  
Elena Naumova ◽  
...  
Keyword(s):  
Plastic Deformation ◽  
High Speed ◽  
Solid Phase ◽  
Equations Of Motion ◽  
Functional Materials ◽  
Cost Effective ◽  
High Energy ◽  
Explosion Welding ◽  
Point Of View ◽  
Technological Parameters

The object of research is the technology of metal processing by high-speed and high-energy methods, plastic deformation of layered metal compositions. Theoretical studies are based on the main provisions of the theory of joining metals in the solid phase, the theory of plasticity, explosion welding technology, plastic deformation of layered metal compositions, and their heat treatment. The main problem of creating layered metal compositions using explosion energy, including wear and corrosion resistant, electrical, materials with high ballistic resistance, etc., is that they have not yet taken their rightful place in the range of modern structural and functional materials. This can be explained by the limited application of this process, as well as the lagging behind the theory and experimental base in the field of joining various metals in the solid phase and providing the necessary performance properties according to the needs of modern industry. The process of deformation of the cladding blank during the explosion welding is considered. The process of the workpiece collision is considered in three stages: the movement of the element of the cladding workpiece before the collision, its inertial movement and deformation. The equations of motion and equilibrium of the elements of the workpiece are described. A joint solution of the equations of plasticity and equilibrium of the blank element in the double inflection zone is presented. The work is devoted to solving the problem of increasing the level of production and economic indicators of the manufacture of layered metal compositions through the development of methods for calculating and optimizing the technological parameters. Explosion welding, as the most versatile, promising, and economical method, which still has many possibilities for the application of mathematical modeling and process optimization, has been investigated for the production and subsequent processing of the main groups of industrial metal compositions. This makes it possible to solve the problem of replacing traditional materials with layered metal compositions. The results obtained are important from the point of view of the application of cost-effective materials with high mechanical, operational, and technological properties.

Periodic Motions of a Two-Body System Subjected to Repetitive Impact

1969 ◽  
Vol 91 (4) ◽  
pp. 931-938 ◽  
Author(s):  
David L. Sikarskie ◽  
Burton Paul
Keyword(s):  
Steady State ◽  
High Speed ◽  
Equations Of Motion ◽  
Point Of View ◽  
State Behavior ◽  
State Response ◽  
Stability Of Solution ◽  
Straightforward Method ◽  
Parametric Studies ◽  
Repetitive Impact

The dynamics of a widely used class of hammer impact machines are investigated on the basis of a two-degree-of-freedom idealization. The difficulty in the problem is due to the repetitive impact which introduces a nonlinearity in the system. It is the purpose of the analysis to develop a solution for the steady-state behavior of the system. There are several ways this can be done. One of the most efficient ways, from the point of view of ease of parametric studies of the system, is to convert the problem to a “boundary” value problem. With this technique, the system is governed by the equations of motion between impacts, and further satisfies additional conditions at the beginning and end of each impact cycle. Since the solution is obtained in only one cycle, it thus represents a straightforward method of studying the effect of various system parameters. A fundamental assumption in the analysis is that the steady-state response of the system has a period equal to the forcing period. This is verified for one set of parameters through the use of high-speed movies of an actual machine. There are several other interesting features in the analysis, including multivaluedness of the solution, allowable solution domain, and stability of solution, which have not been completely resolved to date.

Large-Deformation Response of Deep Circular Arches to Radial Magnetomotive Forces

1978 ◽  
Vol 20 (6) ◽  
pp. 335-343 ◽  
Author(s):  
S. T. S. Al-Hassani ◽  
M. S. J. Hashmi
Keyword(s):  
High Speed ◽  
Numerical Technique ◽  
Equations Of Motion ◽  
High Energy ◽  
Plastic Response ◽  
Deformation Response ◽  
Single Turn ◽  
Impulsive Forces ◽  
Induced Currents ◽  
Good Agreement

Circular-arch specimens were produced from aluminium rings. By using suitable rigid inserts in a ring, only a small portion of it was allowed to deform freely. The rings were subjected to uniformly-distributed, radially-inward-directed impulsive forces. The forces were generated by a high-energy electrical discharge through a single-turn coil which surrounded the ring. The induced currents in the ring were high enough to engender large, transient, radially-directed magnetomotive forces which caused gross plastic deformation. The elastic–plastic response of the arches was predicted by using a finite-difference numerical technique to solve the equations of motion. The analysis allows for circumferential and shear forces, as well as large changes in geometry. It also incorporates strain-hardening, but it ignores the influence of rotary inertia. High-speed photographs were used to record the transient shape of the collapsing arches. These were found to be in good agreement with the predicted profiles.

scholarly journals HIGH-SPEED PLASTIC DEFORMATION IN BIMETAL IN EXPLOSION WELDING

1991 ◽  
Vol 01 (C3) ◽  
pp. C3-241-C3-246
Author(s):  
V. N. GULBIN ◽  
A. D. TCHUDNOVSKY ◽  
A. A. VERTMAN
Keyword(s):  
Plastic Deformation ◽  
High Speed ◽  
Explosion Welding

Microfabrication research at the National Submicron Facility

1983 ◽  
Vol 41 ◽  
pp. 86-89
Author(s):  
E.D. Wolf
Keyword(s):  
Integrated Circuits ◽  
Particle Physics ◽  
High Speed ◽  
New Technology ◽  
High Energy ◽  
High Energy Particle ◽  
New Science ◽  
Wide Range ◽  
Intermediate Domain ◽  
Circuit Function

Most microelectronics devices and circuits operate faster, consume less power, execute more functions and cost less per circuit function when the feature-sizes internal to the devices and circuits are made smaller. This is part of the stimulus for the Very High-Speed Integrated Circuits (VHSIC) program. There is also a need for smaller, more sensitive sensors in a wide range of disciplines that includes electrochemistry, neurophysiology and ultra-high pressure solid state research. There is often fundamental new science (and sometimes new technology) to be revealed (and used) when a basic parameter such as size is extended to new dimensions, as is evident at the two extremes of smallness and largeness, high energy particle physics and cosmology, respectively. However, there is also a very important intermediate domain of size that spans from the diameter of a small cluster of atoms up to near one micrometer which may also have just as profound effects on society as “big” physics.

In situ TEM studies of irradiation effects for materials improvement

1991 ◽  
Vol 49 ◽  
pp. 452-453
Author(s):  
Charles W. Allen
Keyword(s):  
Nuclear Reactor ◽  
Austenitic Stainless Steels ◽  
High Energy ◽  
Point Of View ◽  
In Situ Tem ◽  
Irradiation Effects ◽  
Tem Analysis ◽  
Radiation Induced ◽  
Analytical Tools

Irradiation effects studies employing TEMs as analytical tools have been conducted for almost as many years as materials people have done TEM, motivated largely by materials needs for nuclear reactor development. Such studies have focussed on the behavior both of nuclear fuels and of materials for other reactor components which are subjected to radiation-induced degradation. Especially in the 1950s and 60s, post-irradiation TEM analysis may have been coupled to in situ (in reactor or in pile) experiments (e.g., irradiation-induced creep experiments of austenitic stainless steels). Although necessary from a technological point of view, such experiments are difficult to instrument (measure strain dynamically, e.g.) and control (temperature, e.g.) and require months or even years to perform in a nuclear reactor or in a spallation neutron source. Consequently, methods were sought for simulation of neutroninduced radiation damage of materials, the simulations employing other forms of radiation; in the case of metals and alloys, high energy electrons and high energy ions.

Electron microscopy study of shock synthesis of silicides

1993 ◽  
Vol 51 ◽  
pp. 1162-1163
Author(s):  
Kenneth S. Vecchio
Keyword(s):  
Shock Wave ◽  
Plastic Deformation ◽  
Close Contact ◽  
Microscopy Study ◽  
High Energy ◽  
Electron Microscopy Study ◽  
Powder Materials ◽  
Porous Powder ◽  
Wave Effects ◽  
Wave Passage

Shock-induced reactions (or shock synthesis) have been studied since the 1960’s but are still poorly understood, partly due to the fact that the reaction kinetics are very fast making experimental analysis of the reaction difficult. Shock synthesis is closely related to combustion synthesis, and occurs in the same systems that undergo exothermic gasless combustion reactions. The thermite reaction (Fe2O3 + 2Al -> 2Fe + Al2O3) is prototypical of this class of reactions. The effects of shock-wave passage through porous (powder) materials are complex, because intense and non-uniform plastic deformation is coupled with the shock-wave effects. Thus, the particle interiors experience primarily the effects of shock waves, while the surfaces undergo intense plastic deformation which can often result in interfacial melting. Shock synthesis of compounds from powders is triggered by the extraordinarily high energy deposition rate at the surfaces of the powders, forcing them in close contact, activating them by introducing defects, and heating them close to or even above their melting temperatures.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

The Radio Probe™: A New Measurement Tool for High Speed Integrated Circuits

2005 ◽  
Author(s):  
Mark Kimball
Keyword(s):  
Integrated Circuits ◽  
Integrated Circuit ◽  
High Speed ◽  
Attenuation Factor ◽  
Cost Effective ◽  
Frequency Measurement ◽  
Single Frequency ◽  
Measurement Tool ◽  
Probe Design ◽  
Differential Measurement

Abstract This article presents a novel tool designed to allow circuit node measurements in a radio frequency (RF) integrated circuit. The discussion covers RF circuit problems; provides details on the Radio Probe design, which achieves an input impedance of 50Kohms and an overall attenuation factor of 0 dB; and describes signal to noise issues in the output signal, along with their improvement techniques. This cost-effective solution incorporates features that make it well suited to the task of differential measurement of circuit nodes within an RF IC. The Radio Probe concept offers a number of advantages compared to active probes. It is a single frequency measurement tool, so it complements, rather than replaces, active probes.

Corncob Waste Based Adsorbent for Solid Phase Extraction of Tartrazine in Carbonated Drinks and Analytical Method using Ultra Performance Liquid Chromatography-Mass Spectrometry

2020 ◽  
Vol 16 (7) ◽  
pp. 924-932
Author(s):  
Yasmeen Mutlaq Ghazi Al Shamari ◽  
Saikh Mohammad Wabaidur ◽  
Abdulrahman Abdullah Alwarthan ◽  
Moonis Ali Khan ◽  
Masoom Raza Siddiqui
Keyword(s):  
Mass Spectrometry ◽  
Liquid Chromatography ◽  
Solid Phase Extraction ◽  
Solid Phase ◽  
Cost Effective ◽  
Ultra Performance Liquid Chromatography ◽  
Phase Extraction ◽  
Food Dye ◽  
Hyphenated Technique

Background : A new method has been developed for the determination of food dye tartrazine in soft drinks. Tartrazine is determined by hyphenated technique Ultra Performance Liquid Chromatography coupled with Mass spectrometry. The solid-phase extraction was used for the extraction of tartrazine. Methods: For the LC-MS analysis of tartrazine acetonitrile, water (80:20) was used as a mobile phase whereas, the C-18 column was selected as the stationary phase. The chromatographic run was allowed for 1 min. The adsorbent of the solid-phase extraction was synthesized from the waste corn cob. Results: Method found to be linear in the range of 0.1 mg L-1 - 10 mg L-1, limits of detection and quantitation were found to be 0.0165 mgL-1 and 0.055 mgL-1, respectively. Tartrazine, in the real sample, was found to be 20.39 mgL-1 and 83.26 mgL-1. Conclusion: The developed UPLC-MS method is rapid, simple, precise and can be used for the quantitative analysis of tartrazine. The solid-phase extraction also involves a cost-effective procedure for extraction as it does not involve the commercial cartridge.

The Role of Economic Evaluation in Dissemination and Implementation Research

2017 ◽  
Author(s):  
Ramesh Raghavan
Keyword(s):  
Service Providers ◽  
Implementation Strategies ◽  
Cost Effective ◽  
Point Of View ◽  
Dissemination And Implementation ◽  
Economic Point ◽  
Open Questions ◽  
Public Health Organizations ◽  
Quality Health ◽  
Dissemination And Implementation Research

This chapter presents an overview of how D&I research can be evaluated from an economic point of view. Dissemination and implementation imposes costs upon knowledge purveyors, provider organizations, public health organizations, and payers (including governments). However, whether these added costs will result in improved service delivery and, perhaps more importantly, client outcomes and improvements in population health remain as open questions. If emerging studies reveal that defined implementation strategies are more cost effective than “usual” implementation, then policymakers and service providers will need to resource these added costs of implementation in order to assure the success and sustainability of high-quality health services over the long term.

Sign in / Sign up

Export Citation Format

Share Document