This study is aim to be programmed the simulation which is available for real-time performance analysis so that is to be developed gas turbine engine’s condition monitoring system with analyzing difference between performance analysis results and measuring data from test cell. In addition, test cell created by this study have been developed to use following applications: to use for learning principals and mechanism of gas turbine engine in school, and to use performance test and its further research for variable operating conditions in associated institutes. The maximum thrust of the micro turbojet engine is 137 N (14 kgf) at 126,000 rpm of rotor rotational speed if the Jet A1 kerosene fuel is used. The air flow rate is measured by the inflow air speed of duct, and the fuel flow is measured by a volumetric fuel flowmeter. Temperatures and pressures are measured at the atmosphere, the compressor inlet and outlet and the turbine outlet. The thrust stand was designed and manufactured to measure accurately the thrust by the load cell. All measuring sensors are connected to a DAQ (Data Acquisition) device, and the logging data are used as function parameters of the program, LabVIEW. The LabVIEW is used to develop the engine condition monitoring program. The proposed program can perform both the reference engine model performance analysis at an input condition and the real-time performance analysis with real-time variables. By comparing two analysis results the engine condition can be monitored. Both engine performance analysis data and monitoring results are displayed by the GUI (Graphic User Interface) platform.
Real-Time Performance Analysis and Operation & Maintenance Experience of Photovoltaic Generating Plant in Western India
