scholarly journals Immobilization of mutated xylanase from Neocallimastix patriciarum in E. coli and application for kraft pulp biobleaching

2023 ◽  
Vol 83 ◽  
Author(s):  
Y. Huang ◽  
N.-J. Zhang ◽  
Z. Zhao
Keyword(s):  
Sodium Alginate ◽  
Textile Industry ◽  
Kraft Pulp ◽  
Alginate Beads ◽  
E Coli ◽  
Neocallimastix Patriciarum ◽  
Important Enzyme

Abstract As an important enzyme, xylanase is widely used in the food, pulp, and textile industry. Different applications of xylanase warrant specific conditions including temperature and pH. This study aimed to carry out sodium alginate beads as carrier to immobilize previous reported mutated xylanase from Neocallimastix patriciarum which expressed in E. coli, the activity of immobilization of mutated xylanase was elevated about 4% at pH 6 and 13% at 62 °C. Moreover, the immobilized mutated xylanase retained a greater proportion of its activity than the wide type in thermostability. These properties suggested that the immobilization of mutated xylanase has potential to apply in biobleaching industry.

Characterization and Screening of a Novel Multiparticulate Pulsatile Delivery of Aceclofenac

2016 ◽  
Vol 9 (5) ◽  
pp. 3494-3501
Author(s):  
Bipul Nath ◽  
Santimoni Saikia
Keyword(s):  
Drug Release ◽  
Sodium Alginate ◽  
Alginate Beads ◽  
In Vitro Drug Release ◽  
Dsc Studies ◽  
Ft Ir ◽  
Lag Period ◽  
Pulsatile Delivery ◽  
Ca Alginate

In the present investigation, sodium alginate based multiparticulate system overcoated with time and pH dependent polymer was studied in the form of oral pulsatile system to achieve pulsatile with sustained release of aceclofenac for chronotherapy of rheumatoid arthritis seven batches of micro beads with varying concentration of sodium alginate (2-5 %) were prepared by ionotropic-gelation method using CaCl2 as cross-linking agent. The prepared Ca-alginate beads were coated with 5% Eudragit L100 and filled into pulsatile capsule with varying proportion of plugging materials. Drug loaded microbeads were investigated for physicochemical properties and drug release characteristics. The mean particle sizes of drug-loaded microbeads were found to be in the range 596±1.1 to 860 ± 1.2 micron and %DEE in the range of 65-85%. FT-IR and DSC studies revealed the absence of drug polymer interactions. The release of aceclofenac from formulations F1 to F7 in buffer media (pH 6.8) at the end of 5h was 65.6, 60.7, 55.7, 41.2, 39.2, 27 and 25% respectively. Pulsatile system filled with eudragit coated Ca-alginate microbeads (F2) showed better drug content, particle size, surface topography, in-vitro drug release in a controlled manner. Different plugging materials like Sterculia gum, HPMC K4M and Carbopol were used in the design of pulsatile capsule. The pulsatile system remained intact in buffer pH 1.2 for 2 hours due to enteric coat of the system with HPMCP. The enteric coat dissolved when the pH of medium was changed to 7.4. The pulsatile system developed with Sterculia gum as plugging material showed satisfactory lag period when compared to HPMC and Carbopol.

Pollution, Toxicity and Carcinogenicity of Organic Dyes and their Catalytic Bio-Remediation

2019 ◽  
Vol 25 (34) ◽  
pp. 3645-3663 ◽  
Author(s):  
Muhammad Ismail ◽  
Kalsoom Akhtar ◽  
M.I. Khan ◽  
Tahseen Kamal ◽  
Murad A. Khan ◽  
...  
Keyword(s):  
Water Pollution ◽  
Textile Industry ◽  
Pathogenic Bacteria ◽  
Diarrheal Disease ◽  
Organic Dyes ◽  
Chemical Reduction ◽  
Cost Effective ◽  
Agricultural Runoff ◽  
E Coli ◽  
Sanitation Services

: Water pollution due to waste effluents of the textile industry is seriously causing various health problems in humans. Water pollution with pathogenic bacteria, especially Escherichia coli (E. coli) and other microbes is due to the mixing of fecal material with drinking water, industrial and domestic sewage, pasture and agricultural runoff. Among the chemical pollutants, organic dyes due to toxic nature, are one of the major contaminants of industrial wastewater. Adequate sanitation services and drinking quality water would eliminate 200 million cases of diarrhea, which results in 2.1 million less deaths caused by diarrheal disease due to E. coli each year. Nanotechnology is an excellent platform as compared to conventional treatment methods of water treatment and remediation from microorganisms and organic dyes. In the current study, toxicity and carcinogenicity of the organic dyes have been studied as well as the remediation/inactivation of dyes and microorganism has been discussed. Remediation by biological, physical and chemical methods has been reviewed critically. A physical process like adsorption is cost-effective, but can’t degrade dyes. Biological methods were considered to be ecofriendly and cost-effective. Microbiological degradation of dyes is cost-effective, eco-friendly and alternative to the chemical reduction. Besides, certain enzymes especially horseradish peroxidase are used as versatile catalysts in a number of industrial processes. Moreover, this document has been prepared by gathering recent research works related to the dyes and microbial pollution elimination from water sources by using heterogeneous photocatalysts, metal nanoparticles catalysts, metal oxides and enzymes.

scholarly journals Mead Production Using Immobilized Cells of Saccharomyces cerevisiae: Reuse of Sodium Alginate Beads

Processes ◽  
2021 ◽  
Vol 9 (4) ◽  
pp. 724
Author(s):  
Miguel L. Sousa-Dias ◽  
Vanessa Branco Paula ◽  
Luís G. Dias ◽  
Letícia M. Estevinho
Keyword(s):  
Saccharomyces Cerevisiae ◽  
Sodium Alginate ◽  
Fermentation Process ◽  
Immobilized Cells ◽  
Alginate Beads ◽  
Production Medium ◽  
Alcohol Content ◽  
Volatile Acidity ◽  
The Matrix ◽  
Second Category

This work studied the production of mead using second category honey and the immobilized cells of Saccharomyces cerevisiae in sodium alginate, with concentrations of 2% and 4%, and their reuse in five successive fermentations. The immobilized cells with 4% alginate beads were mechanically more stable and able to allow a greater number of reuses, making the process more economical. The fermentation’s consumption of sugars with free cells (control) and immobilized cells showed a similar profile, being completed close to 72 h, while the first use of immobilized cells finished at 96 h. The immobilized cells did not significantly influence some oenological parameters, such as the yield of the consumed sugars/ethanol, the alcohol content, the pH and the total acidity. There was a slight increase in the volatile acidity and a decrease in the production of SO2. The alginate concentrations did not significantly influence either the parameters used to monitor the fermentation process or the characteristics of the mead. Mead fermentations with immobilized cells showed the release of cells into the wort due to the disintegration of the beads, indicating that the matrix used for the yeast’s immobilization should be optimized, considering the mead production medium.

scholarly journals Optimization of alcoholic fermentation using immobilized yeast cells in calcium alginate gel

2015 ◽  
pp. 207-218
Author(s):  
Jovana Djuran ◽  
Zorana Roncevic ◽  
Bojana Bajic ◽  
Sinisa Dodic ◽  
Jovana Grahovac ◽  
...  
Keyword(s):  
Sodium Alginate ◽  
Yeast Extract ◽  
Fossil Fuels ◽  
Alcoholic Fermentation ◽  
Immobilized Cells ◽  
Alginate Beads ◽  
Yeast Cells ◽  
Glucose Content ◽  
Alginate Concentration ◽  
Economic Analyses

Ethanol is an important industrial chemical with emerging potential as a biofuel to replace fossil fuels. In order to enhance the efficiency and yield of alcoholic fermentation, combined techniques such as cells immobilization and media optimization have been used. The aim of this study was the optimization of sodium alginate concentration and glucose and yeast extract content in the media for ethanol production with immobilized cells of Saccharomyces cerevisiae. Optimization of these parameters was attempted by using a Box-Behnken design using the response surface methodology. The obtained model predicts that the maximum ethanol content of 7.21% (v/v) is produced when the optimal values of sodium alginate concentration and initial content of glucose and yeast extract in the medium are 22.84 g/L, 196.42 g/L and 3.77 g/L, respectively. To minimize the number of yeast cells "eluted" from the alginate beads and residual glucose content in fermented media, additional two sets of optimization were made. The obtained results can be used for further techno-economic analyses of the process to select the optimum conditions of the fermentation process for industrial application.

scholarly journals Anti-Streptococcus mutans and anti-biofilm activities of dextranase and its encapsulation in alginate beads for application in toothpaste

PeerJ ◽  
2020 ◽  
Vol 8 ◽  
pp. e10165
Author(s):  
Nucharee Juntarachot ◽  
Sasithorn Sirilun ◽  
Duangporn Kantachote ◽  
Phakkharawat Sittiprapaporn ◽  
Piyachat Tongpong ◽  
...  
Keyword(s):  
Sodium Alginate ◽  
Calcium Chloride ◽  
Streptococcus Mutans ◽  
Dental Plaque ◽  
Biofilm Formation ◽  
Alginate Beads ◽  
Oral Diseases ◽  
Sensory Test ◽  
Alginate Concentration ◽  
The Stability

Background The accumulation of plaque causes oral diseases. Dental plaque is formed on teeth surfaces by oral bacterial pathogens, particularly Streptococcus mutans, in the oral cavity. Dextranase is one of the enzymes involved in antiplaque accumulation as it can prevent dental caries by the degradation of dextran, which is a component of plaque biofilm. This led to the idea of creating toothpaste containing dextranase for preventing oral diseases. However, the dextranase enzyme must be stable in the product; therefore, encapsulation is an attractive way to increase the stability of this enzyme. Methods The activity of food-grade fungal dextranase was measured on the basis of increasing ratio of reducing sugar concentration, determined by the reaction with 3, 5-dinitrosalicylic acid reagent. The efficiency of the dextranase enzyme was investigated based on its minimal inhibitory concentration (MIC) against biofilm formation by S. mutans ATCC 25175. Box-Behnken design (BBD) was used to study the three factors affecting encapsulation: pH, calcium chloride concentration, and sodium alginate concentration. Encapsulation efficiency (% EE) and the activity of dextranase enzyme trapped in alginate beads were determined. Then, the encapsulated dextranase in alginate beads was added to toothpaste base, and the stability of the enzyme was examined. Finally, sensory test and safety evaluation of toothpaste containing encapsulated dextranase were done. Results The highest activity of the dextranase enzyme was 4401.71 unit/g at a pH of 6 and 37 °C. The dextranase at its MIC (4.5 unit/g) showed strong inhibition against the growth of S. mutans. This enzyme at 1/2 MIC also showed a remarkable decrease in biofilm formation by S. mutans. The most effective condition of dextranase encapsulation was at a pH of 7, 20% w/v calcium chloride and 0.85% w/v sodium alginate. Toothpaste containing encapsulated dextranase alginate beads produced under suitable condition was stable after 3 months of storage, while the sensory test of the product was accepted at level 3 (like slightly), and it was safe. Conclusion This research achieved an alternative health product for oral care by formulating toothpaste with dextranase encapsulated in effective alginate beads to act against cariogenic bacteria, like S. mutants, by preventing dental plaque.

Self‐Healing of Cracks in Concrete Using Bacillus Strains Encapsulated in Sodium Alginate Beads

2020 ◽  
Vol 5 (1) ◽  
pp. 312-323 ◽  
Author(s):  
Saman Shahid ◽  
Muhammad A. Aslam ◽  
Shahid Ali ◽  
Mariam Zameer ◽  
Muhammad Faisal
Keyword(s):  
Sodium Alginate ◽  
Alginate Beads ◽  
Self Healing ◽  
Bacillus Strains
Sign in / Sign up

Export Citation Format

Share Document