APPLICATION OF ENTROPY GENERATION MINIMIZATION FOR OPTIMIZING THE GEOMETRY OF A DOUBLE-TUBE HEAT EXCHANGER

2017 ◽  
Vol 48 (11) ◽  
pp. 955-968
Author(s):  
Rafal Laskowski ◽  
Pawel Tomczak ◽  
Maciej Jaworski
Keyword(s):  
Heat Exchanger ◽  
Entropy Generation ◽  
Tube Heat Exchanger ◽  
Entropy Generation Minimization

scholarly journals Research on the Thermal Hydraulic Performance and Entropy Generation Characteristics of Finned Tube Heat Exchanger with Streamline Tube

Energies ◽  
2020 ◽  
Vol 13 (20) ◽  
pp. 5408
Author(s):  
Zuoqin Qian ◽  
Qiang Wang ◽  
Song Lv
Keyword(s):  
Heat Exchanger ◽  
Entropy Generation ◽  
Thermal Performance ◽  
Flow Characteristics ◽  
Hydraulic Performance ◽  
Finned Tube ◽  
Tube Heat Exchanger ◽  
Finned Tube Heat Exchanger ◽  
Overall Performance ◽  
Present Simulation

Thermal hydraulic performance of the fin-and-tube heat exchanger is presented in this paper. The purpose of this investigation was to investigate the heat transfer mechanism and flow characteristics in the finned tube heat exchanger with streamline tube. The streamline tube in this paper had the streamline cross section which was composed of a semicircle and a half diamond. Three-dimensional numerical simulation was presented and validated by the experiment and the other numerical simulation from public articles. The present simulation had good agreement with the experimental results. The difference of the j factor and f factor between the experimental results and present simulation results by k-ε-enhance model was less than 7.6%. The geometrical parameters were considered as every single variable to investigate the thermal hydraulic performance. The results showed that smaller transversal and larger tube pitch provided greater compactness and better thermal performance. Moreover, a larger angle was not only beneficial to enhance the thermal performance, but also helpful to improve the overall performance. Secondly, the effects of angle on the heat transfer performance and fluid flow characteristics were investigated as the perimeter kept constant. It was shown that the overall performance of the streamline tube was better than the circular tube. Lastly, the entropy generation including frictional entropy generation and the thermal entropy generation were analyzed. It can be concluded that by using the streamline tube, the wake region can be obviously reduced, and thermal performance can be improved.

scholarly journals Statistical analysis of entropy generation in longitudinally finned tube heat exchanger with shell side nanofluid by a single phase approach

2016 ◽  
Vol 37 (2) ◽  
pp. 3-22 ◽  
Author(s):  
Pavan Kumar Konchada ◽  
Vinay Pv ◽  
Varaprasad Bhemuni
Keyword(s):  
Heat Transfer ◽  
Heat Exchanger ◽  
Entropy Generation ◽  
Single Phase ◽  
Pure Water ◽  
Finned Tube ◽  
Shell Side ◽  
Tube Heat Exchanger ◽  
Phase Approach ◽  
Finned Tube Heat Exchanger

AbstractThe presence of nanoparticles in heat exchangers ascertained increment in heat transfer. The present work focuses on heat transfer in a longitudinal finned tube heat exchanger. Experimentation is done on longitudinal finned tube heat exchanger with pure water as working fluid and the outcome is compared numerically using computational fluid dynamics (CFD) package based on finite volume method for different flow rates. Further 0.8% volume fraction of aluminum oxide (Al2O3) nanofluid is considered on shell side. The simulated nanofluid analysis has been carried out using single phase approach in CFD by updating the user-defined functions and expressions with thermophysical properties of the selected nanofluid. These results are thereafter compared against the results obtained for pure water as shell side fluid. Entropy generated due to heat transfer and fluid flow is calculated for the nanofluid. Analysis of entropy generation is carried out using the Taguchi technique. Analysis of variance (ANOVA) results show that the inlet temperature on shell side has more pronounced effect on entropy generation.

Entropy generation minimization of a double-pipe pin fin heat exchanger

2008 ◽  
Vol 28 (17-18) ◽  
pp. 2337-2344 ◽  
Author(s):  
N. Sahiti ◽  
F. Krasniqi ◽  
Xh. Fejzullahu ◽  
J. Bunjaku ◽  
A. Muriqi
Keyword(s):  
Heat Exchanger ◽  
Entropy Generation ◽  
Pin Fin ◽  
Entropy Generation Minimization ◽  
Double Pipe
Sign in / Sign up

Export Citation Format

Share Document