A field synergy principle of velocity and pressure for flow resistance reduction

Author(s):  
Zi-Xiang Tong ◽  
Ming-Jia Li ◽  
Yuan Ding
Processes ◽  
2021 ◽  
Vol 9 (5) ◽  
pp. 786
Author(s):  
Jiedong Ye ◽  
Junshuai Lv ◽  
Dongli Tan ◽  
Zhiqiang Ai ◽  
Zhiqiang Feng

The NH3 uniformity and conversion rate produced by the urea–water solution spray system is an essential factor affecting de-NOx efficiency. In this work, a three-dimensional simulation model was developed with the CFD software and was employed to investigate the effects of two typical injection methods (wall injection and center injection) and three distribution strategies (pre-mixer, post-mixer, pre-mixer, and post-mixer) of two typical mixers on the urea conversion rate and uniformity. The field synergy principle was employed to analyze the heat transfer of different mixer flow fields. The results show that the single mixer has instability in optimizing different injection positions due to different injection methods and injection positions. The dual-mixer is stable in the optimization of the flow field under different conditions. The conclusion of the field synergy theory of the single mixer accords with the simulation result. The Fc of the dual-mixer cases is low, but the NH3 conversion and uniformity index rate are also improved due to the increase in the residence time of UWS.


Author(s):  
Vekamulla Narayana

In the present study, an attempt is made to explore the flow field inside the differentially heated lid-driven square cavity. The governing equations along with boundary conditions are solved numerically. The simulated results (100 ≤ Re ≤ 1000 and 0.001 ≤ Ri ≤ 10) are validated with previous results in the literature. The convection differencing schemes, namely, UPWIND, QUICK, SUPERBEE, and SFCD, are discussed and are used to simulate the flow using the MPI code. It is observed that the computational cost for all the differencing schemes get reduced tremendously when the MPI code is implemented. Plots demonstrate the influences of Re and Ri in terms of the contours of the fluid streamlines, isotherms, energy streamlines, and field synergy principle.


Author(s):  
Peiyong Ma ◽  
Baogang Wang ◽  
Shuilin Chen ◽  
Xianwen Zhang ◽  
Changfa Tao ◽  
...  

The gradient porous materials (GPMs)-filled pipe structure has been proved to be effective in improving the heat transfer ability and reducing pressure drop of fluid. A GPMs-filled pipe structure in which radial pore-size gradient increased nonlinearly has been proposed. The field synergy theory and tradeoff analysis on the efficiency of integrated heat transfer has been accomplished based on performance evaluation criteria (PEC). It was found that the ability of heat transfer was enhanced considerably, based on the pipe structure, in which the pore-size of porous materials increased as a parabolic opening up. The flow resistance was the lowest and the integrated heat transfer performance was the highest when radial pore-size gradient increasing as a parabolic opening down.


2018 ◽  
Vol 55 (3) ◽  
pp. 811-822 ◽  
Author(s):  
Jun Shen ◽  
Lingping Zeng ◽  
Zhichun Liu ◽  
Wei Liu

Sign in / Sign up

Export Citation Format

Share Document