scholarly journals Determination of formation dip and strike from transient LWD electromagnetic measurements

2022 ◽  
pp. 36-48
Author(s):  
M. N. Nikitenkoч ◽  
M. B. Rabinovich ◽  
M. V. Sviridov
Keyword(s):  
Original Method ◽  
Earth Model ◽  
Data Inversion ◽  
Electromagnetic Measurements ◽  
The Matrix ◽  
Formation Resistivity ◽  
Resource Intensity ◽  
The Time Domain ◽  
Model Equivalence

An original method has been developed for estimating formation dip and strike from transient induction LWD data, based on focusing in the time domain. The focusing consists in decomposing the measured signals into a time series and diagonalizing the matrix of focused magnetic field components. We have implemented the method and comprehensively tested it in horizontally-layered media used for LWD data inversion to solve geosteering problems and evaluate the formation resistivity. Estimates of the angles contribute to reliable geosteering when choosing a direction of drilling, as well as when inverting data for a complex earth model. A significant reduction in the resource intensity of inversion and model equivalence is achieved by reducing the number of determined parameters.

Lateral resolution of the electron microbeam analysis

1978 ◽  
Vol 36 (1) ◽  
pp. 542-543
Author(s):  
H.J. Dudek
Keyword(s):  
Quantitative Analysis ◽  
Depth Resolution ◽  
Lateral Resolution ◽  
Cylindrical Particle ◽  
Correction Procedure ◽  
X Ray ◽  
Element Concentrations ◽  
Microbeam Analysis ◽  
The Matrix

The chemical inhomogenities in modern materials such as fibers, phases and inclusions, often have diameters in the region of one micrometer. Using electron microbeam analysis for the determination of the element concentrations one has to know the smallest possible diameter of such regions for a given accuracy of the quantitative analysis.In th is paper the correction procedure for the quantitative electron microbeam analysis is extended to a spacial problem to determine the smallest possible measurements of a cylindrical particle P of high D (depth resolution) and diameter L (lateral resolution) embeded in a matrix M and which has to be analysed quantitative with the accuracy q. The mathematical accounts lead to the following form of the characteristic x-ray intens ity of the element i of a particle P embeded in the matrix M in relation to the intensity of a standard S

Determination of the phase structure of polymerblends by electron microscopy

1978 ◽  
Vol 36 (1) ◽  
pp. 492-493
Author(s):  
Dr. G. Kaemof
Keyword(s):  
Screw Extruder ◽  
Electron Microscopic ◽  
Thin Sections ◽  
Single Screw Extruder ◽  
Transmission Electron ◽  
The Matrix ◽  
Twin Screw ◽  
Special Case ◽  
Microscopic Investigations

A mixture of polycarbonate (PC) and styrene-acrylonitrile-copolymer (SAN) represents a very good example for the efficiency of electron microscopic investigations concerning the determination of optimum production procedures for high grade product properties.The following parameters have been varied:components of charge (PC : SAN 50 : 50, 60 : 40, 70 : 30), kind of compounding machine (single screw extruder, twin screw extruder, discontinuous kneader), mass-temperature (lowest and highest possible temperature).The transmission electron microscopic investigations (TEM) were carried out on ultra thin sections, the PC-phase of which was selectively etched by triethylamine.The phase transition (matrix to disperse phase) does not occur - as might be expected - at a PC to SAN ratio of 50 : 50, but at a ratio of 65 : 35. Our results show that the matrix is preferably formed by the components with the lower melting viscosity (in this special case SAN), even at concentrations of less than 50 %.

Polishing process effect on the image of dispersed precipitates

1984 ◽  
Vol 42 ◽  
pp. 534-535
Author(s):  
C.T. Hu ◽  
C.W. Allen
Keyword(s):  
Matrix Material ◽  
Specimen Preparation ◽  
Second Phase ◽  
Precipitate Particle ◽  
Polishing Process ◽  
Second Phase Particles ◽  
The Matrix ◽  
Surface Profiles ◽  
Thinning Process

One important problem in determination of precipitate particle size is the effect of preferential thinning during TEM specimen preparation. Figure 1a schematically represents the original polydispersed Ni3Al precipitates in the Ni rich matrix. The three possible type surface profiles of TEM specimens, which result after electrolytic thinning process are illustrated in Figure 1b. c. & d. These various surface profiles could be produced by using different polishing electrolytes and conditions (i.e. temperature and electric current). The matrix-preferential-etching process causes the matrix material to be attacked much more rapidly than the second phase particles. Figure 1b indicated the result. The nonpreferential and precipitate-preferential-etching results are shown in Figures 1c and 1d respectively.

scholarly journals Numerical Analysis of Viscoelastic Rotating Beam with Variable Fractional Order Model Using Shifted Bernstein–Legendre Polynomial Collocation Algorithm

2021 ◽  
Vol 5 (1) ◽  
pp. 8
Author(s):  
Cundi Han ◽  
Yiming Chen ◽  
Da-Yan Liu ◽  
Driss Boutat
Keyword(s):  
Numerical Analysis ◽  
Fractional Order ◽  
Governing Equation ◽  
Numerical Solutions ◽  
Bernstein Polynomials ◽  
Matrix Product ◽  
Algebraic Equations ◽  
Rotating Beam ◽  
The Matrix ◽  
The Time Domain

This paper applies a numerical method of polynomial function approximation to the numerical analysis of variable fractional order viscoelastic rotating beam. First, the governing equation of the viscoelastic rotating beam is established based on the variable fractional model of the viscoelastic material. Second, shifted Bernstein polynomials and Legendre polynomials are used as basis functions to approximate the governing equation and the original equation is converted to matrix product form. Based on the configuration method, the matrix equation is further transformed into algebraic equations and numerical solutions of the governing equation are obtained directly in the time domain. Finally, the efficiency of the proposed algorithm is proved by analyzing the numerical solutions of the displacement of rotating beam under different loads.

scholarly journals Simplified and Rapid Determination of Primaquine and 5,6-Orthoquinone Primaquine by UHPLC-MS/MS: Its Application to a Pharmacokinetic Study

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4357
Author(s):  
Waritda Pookmanee ◽  
Siriwan Thongthip ◽  
Jeeranut Tankanitlert ◽  
Mathirut Mungthin ◽  
Chonlaphat Sukasem ◽  
...  
Keyword(s):  
Pharmacokinetic Study ◽  
High Performance ◽  
Rapid Determination ◽  
Active Metabolites ◽  
Chromatography Tandem Mass Spectrometry ◽  
Accuracy And Precision ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Isocratic Mode

The method for the determination of primaquine (PQ) and 5,6-orthoquinone primaquine (5,6-PQ), the representative marker for PQ active metabolites, via CYP2D6 in human plasma and urine has been validated. All samples were extracted using acetonitrile for protein precipitation and analyzed using the ultra-high-performance liquid chromatography–tandem mass spectrometry (UHPLC-MS/MS) system. Chromatography separation was carried out using a Hypersil GOLDTM aQ C18 column (100 × 2.1 mm, particle size 1.9 μm) with a C18 guard column (4 × 3 mm) flowed with an isocratic mode of methanol, water, and acetonitrile in an optimal ratio at 0.4 mL/min. The retention times of 5,6-PQ and PQ in plasma and urine were 0.8 and 1.6 min, respectively. The method was validated according to the guideline. The linearity of the analytes was in the range of 25–1500 ng/mL. The matrix effect of PQ and 5,6-PQ ranged from 100% to 116% and from 87% to 104% for plasma, and from 87% to 89% and from 86% to 87% for urine, respectively. The recovery of PQ and 5,6-PQ ranged from 78% to 95% and form 80% to 98% for plasma, and from 102% to from 112% to 97% to 109% for urine, respectively. The accuracy and precision of PQ and 5,6-PQ in plasma and urine were within the acceptance criteria. The samples should be kept in the freezer (−80 °C) and analyzed within 7 days due to the metabolite stability. This validated UHPLC-MS/MS method was beneficial for a pharmacokinetic study in subjects receiving PQ.

scholarly journals Wine origin authentication linked to terroir – wine fingerprint

2019 ◽  
Vol 15 ◽  
pp. 02033
Author(s):  
B. Gabel
Keyword(s):  
Pore Water ◽  
Isotope Composition ◽  
Food Product ◽  
Isotopic Signature ◽  
Original Method ◽  
Economic Problem ◽  
Red Wines ◽  
Table Grapes ◽  
Mineral Phases

Global wine and alcohol trade faces a serious economic problem linked to counterfeiting of these commodities. Recently applied authentication methods and techniques pose more difficulties for counterfeiters but they are apparently not effective once we consider economical losses identified by EU legal authorities. The presented solution links isotopic characteristics of the soil, plant, technological intermediate product and the final food product (wine, grapes) on the basis of 87Sr/86Sr isotopes ratios. For the isotopic signature of wines, the average isotope composition of the substrate cannot be a reliable indicator. Only the isotopic composition of pore water can, as it leaches various mineral phases at different stages and passes into vine root system. Instead of complicated sampling of pore water, an original method of preparing and processing soil samples and consequently must & wine samples was developed. Based on both, soil and biological material analysis, we can unquestionably determine not only geographical but also regional and local authenticity of the wine. Determination of red wines isotopic signature is more straightforward process in comparison to white wines, because of technologically different processing of grapes. That is the reason why, in case of white vines, the 87Sr/86Sr ratio of bentonites (natural purifier and absorbent useful in the process of winemaking) must also be taken into consideration. Results of analyses of Slovak wines from geographically diverse regions as well as from sites in close-by distances have clearly established reliability of presented concept, in which the soil is linked to the plant and to the final food product (wine or table grapes).

scholarly journals Simultaneous Determination of Nitroimidazoles and Quinolones in Honey by Modified QuEChERS and LC-MS/MS Analysis

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Haiyan Lei ◽  
Jianbo Guo ◽  
Zhuo Lv ◽  
Xiaohong Zhu ◽  
Xiaofeng Xue ◽  
...  
Keyword(s):  
Recovery Rates ◽  
Inhibition Effect ◽  
Standard Curve ◽  
Modified Quechers ◽  
Relative Standard ◽  
Acacia Honey ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Standard Deviations

This study reports an analytical method for the determination of nitroimidazole and quinolones in honey using liquid chromatography-tandem mass spectrometry (LC-MS/MS). A modified QuEChERS methodology was used to extract the analytes and determine veterinary drugs in honey by LC-MS/MS. The linear regression was excellent at the concentration levels of 1–100 ng/mL in the solution standard curve and the matrix standard curve. The recovery rates of nitroimidazole and quinolones were 4.4% to 59.1% and 9.8% to 46.2% with relative standard deviations (RSDs) below 5.2% and the recovery rates of nitroimidazole and quinolones by the matrix standard curve ranged from 82.0% to 117.8% and 79% to 115.9% with relative standard deviations (RSDs) lower than 6.3% in acacia and jujube honey. The acacia and jujube honeys have stronger matrix inhibition effect to nitroimidazole and quinolones residue; the matrix inhibition effect of jujube honey is stronger than acacia honey. The matrix standard curve can calibrate matrix effect effectively. In this study, the detection method of antibiotics in honey can be applied to the actual sample. The results demonstrated that the modified QuEChERS method combined with LC-MS/MS is a rapid, high, sensitive method for the analysis of nitroimidazoles and quinolones residues in honey.

Determination of the alloying content in the matrix of Zr alloys using synchrotron radiation microprobe X-ray fluorescence

2003 ◽  
Vol 321 (2-3) ◽  
pp. 221-232 ◽  
Author(s):  
A Yilmazbayhan ◽  
O Delaire ◽  
A.T Motta ◽  
R.C Birtcher ◽  
J.M Maser ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
X Ray ◽  
The Matrix ◽  
Zr Alloys

scholarly journals Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1837
Author(s):  
Harischandra Naik Rathod ◽  
Bheemanna Mallappa ◽  
Pallavi Malenahalli Sidramappa ◽  
Chandra Sekhara Reddy Vennapusa ◽  
Pavankumar Kamin ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Solid Phase ◽  
Graphitized Carbon Black ◽  
Limit Of Quantification ◽  
Gas And Liquid Chromatography ◽  
Relative Standard ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Primary Secondary Amine

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg−1 for Capsicum and 0.10 to 9.55 µg·kg−1 (LOD) and 0.35 to 33.43 µg·kg−1 (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSDwR) by spiking of mixed pesticides standards at 100 µg·kg−1 recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.

ANALYSIS OF SOLDERS ON TIN AND LEAD BASES BY X-RAY FLOORESCENT SPECTROSCOPY

2021 ◽  
pp. 124-131
Author(s):  
A.V. Alekseev ◽  
◽  
G.V. Orlov ◽  
P.S. Petrov ◽  
A.V. Slavin ◽  
...  
Keyword(s):  
Emission Spectroscopy ◽  
High Resolution Mass Spectrometry ◽  
Analytical Signal ◽  
Atomic Emission ◽  
Standard Samples ◽  
X Ray ◽  
Fundamental Parameters ◽  
The Matrix ◽  
Resolution Mass

The determination of the elements Cu, Ni, Sb, Bi, Pb, Zn and Fe in the tin-based solder VPr35, as well as the elements Sn, Ni, Sb, Bi and In in the lead-based VPr40 solder by the method of х-ray fluorescence spectroscopy has been carried out. The calibration dependences are corrected taking into account the superposition of signals from interfering elements on the analytical signal and changes in intensity caused by inter-element influences in the matrix. The analysis was carried out by the method of fundamental parameters without using standard samples. The correctness of the results obtained was confirmed by their comparative analysis by atomic emission spectroscopy and high-resolution mass spectrometry with a glow discharge.

Sign in / Sign up

Export Citation Format

Share Document