scholarly journals Field Efficacy of a Combination of Seed Treatment and Foliar Spray against Pest Complex in Green Gram

2021 ◽  
Author(s):  
V.K. Chaudhari ◽  
V.B. Patel ◽  
M.P. Patel ◽  
A.S. Bhanvadiya
Keyword(s):  
Seed Treatment ◽  
Insect Pests ◽  
Control Measure ◽  
Block Design ◽  
Foliar Spray ◽  
Green Gram ◽  
Effective Control ◽  
Economic Losses ◽  
Growth Stages ◽  
Larval Population

Background: Pulses constitute the major source of dietary protein; therefore, it has ability to fulfil required protein recommended dietary allowance for vegetarian population of India. Pulse crop attack more than 200 insect pests and inflicting heavy damages at different growth stages that lead to significant economic losses to the farmers. The studies were conducted on green gram to find out the effective control measure of different crop stages against insect pests complex in green gram. Methods: The field experiment was laid out in a randomized block design and the consist 12 treatments with seed treatment and foliar sprays of insecticides at 50 per cent flowering stages then these treatments were replicated thrice at both years 2017 and 2018. Result: The experiments concluded that the reduction of sucking pests population like thrips, jassid and whitefly and larval population of Maruca vitrata and Helicoverpa armigera was found in seed treated with imidacloprid 48 FS and spray of flubendiamide at 50 per cent flowering stage in green gram with Rs. 10,678 net profit and 1:1.42 cost-benefit ratio.

scholarly journals Foliar Nitrogen Management for Improving Growth and Yield of Dryland Wheat

2015 ◽  
Vol 48 (3) ◽  
pp. 23-31 ◽  
Author(s):  
◽  
I. Alam ◽  
I. Khan ◽  
M. Kumar ◽  
A. Shah ◽  
...  
Keyword(s):  
Grain Yield ◽  
Yield Components ◽  
Block Design ◽  
Foliar Spray ◽  
Growth And Yield ◽  
Growth Stages ◽  
Sowing Time ◽  
N Application ◽  
Foliar Nitrogen ◽  
Foliar N

Abstract Foliar nitrogen (N) application is considered an important factor affecting phenology, growth, yield, and yield components of dryland wheat (Triticum aestivum L.). A field experiment was conducted to study effects of foliar N on dryland wheat (cv. Prisabk-2004) at the Agronomy Research Farm, The University of Agriculture Peshawar, Pakistan, during winter 2010-2011. The experiment was laid out in randomized complete block design using four replications. A plot size of 3 m by 4 m, having 8 rows, 4 m long and 30 cm apart was used. A total of 80 kg N ha−1 in the form of urea was applied. Out of 80 kg N ha−1, 70 kg N ha−1 was applied to the soil at sowing time, and the remaining 10 kg N ha−1 was applied in the form of foliar spray (2% N). The required foliar N was applied in various combinations (splits) at different growth stages viz. 30, 60, 90 and 120 days after emergence (DAE). Phenological development (days to anthesis and physiological maturity) was delayed, yield components and yield increased significantly (p ≤ 0.05) with foliar N over control (water spray without N). Wheat grain yield increased to the highest level (4427 kg ha−1) when 100 % foliar N was applied (no split) at 90 DAE, followed by 4050 kg ha−1 at 120 DAE, while the control (no foliar N) resulted in the lowest grain yield (2573 kg ha−1). We concluded from this study that 2 % foliar N application in a single split either at 90 or 120 DAE could improve wheat productivity under dryland condition.

scholarly journals INTEGRATED MANAGEMENT OF WEEDS IN A PERENNIAL CROP:THE EXAMPLE OF CRANBERRIES

HortScience ◽  
1992 ◽  
Vol 27 (11) ◽  
pp. 1163g-1163
Author(s):  
M.J. Else
Keyword(s):  
Pest Management ◽  
Insect Pests ◽  
Integrated Management ◽  
Control Measure ◽  
Control Measures ◽  
The Other ◽  
Economic Losses ◽  
Perennial Crops ◽  
Over Time

In Integrated Pest Management (IPM), the costs of a control measure are compared to the potential for economic losses caused by a pest, with control measures being recommended only when expected costs of losses exceed costs of control. IPM models have been developed largely for insect pests, which multiply rapidly and for which timely population assessments are thus essential. Weed pests, on the other hand, multiply slowly. In the case of perennial crops, weeds may not reach populations sufficient to warrant control under conventional IPM criteria for many years. It is proposed that IPM concepts be adapted to weedy pests of perennial crops by creating models in which the long-term costs and consequences of both weeds and weed control measures are considered. These models would take into account expected increases in control costs and decreases in effectiveness of control measures over time and as a consequence consider some weeds to have effective thresholds at or near zero.

scholarly journals Alleviation of Sodicity Stress in Green Gram and Black Gram Using Plant Growth Regulating Substances

2020 ◽  
pp. 121-126
Author(s):  
S. Nithila ◽  
R. Amutha ◽  
R. Sivakumar
Keyword(s):  
Harvest Index ◽  
Block Design ◽  
Foliar Spray ◽  
Soil Condition ◽  
Green Gram ◽  
Soil Conditions ◽  
Flower Initiation ◽  
Black Gram ◽  
Sodic Soil ◽  
The Impact

Most of the pulses in India are grown in low fertility, problematic soils and unpredictable environmental conditions. Major issues in pulse production are poor establishment and low harvest index. In pulses harvest index is only 15-20%. Physiological manipulations such as spraying of hormones and nutrients that reduce flower drop and thereby facilitate large sink size. The objective of this research is to study the impact of Growth regulating substances on germination and establishment and economic yield of black gram and green gram under Sodic soil conditions. The study area is Anbil Dharmalingam Agricultural College and Research Institute, Trichy. The nature of soil is sodicity with exchangeable sodium percentage (ESP) of 18.94% with pH of 9.02. The two crop varieties green gram VBN (Gg) 2 & black gram VBN (Bg) 6 were employed under sodic soil condition. Field experiment was conducted during late July to October 2017 under sodic soil condition with ten treatments. The experiment was laid out in a Randamized Block Design with three replications. Foliar spray was given at flower initiation and pod initiation stages. Ten treatment combinations were employed by T1: Control, T2: Seed Treatment (ST) with Ammonium Molybdate (AM) 0.05% + foliar spray of ZnSO4 – 0.5%. T3: AM 0.05% + Panchagavya -3.0%,              T4: AM 0.05% + foliar spray of KCl -1%, T5: ST with GA3 50 ppm + foliar spray of ZnSO4 – 0.5%,   T6: GA3 50 ppm + Panchagavya -3.0%, T7: GA3 50 ppm + KCl -1%, T8: Cowpea Sprout Extract 2% +ZnSO4 – 0.5%, T9: Cowpea Sprout Extract 2% +Panchagavya -3.0%, T10: Cowpea Sprout Extract 2% + foliar spray of KCl -1%. In conclusion the yield enhancement in best treatment may be due to the presence of bioactive substances in sprouted cowpea extracts and panchagavya were found effective towards yield maximization.

scholarly journals Effect of Various Sources of Zinc and Iron on Grain Yield, Nutrient Uptake and Quality Parameters of Finger Millet (Eleusine coracana L.)

2020 ◽  
pp. 46-55
Author(s):  
E. Ajay Kumar ◽  
K. Surekha ◽  
K. Bhanu Rekha ◽  
S. Harish Kumar Sharma
Keyword(s):  
Grain Yield ◽  
Nutrient Uptake ◽  
Grain Quality ◽  
Finger Millet ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Calcium Content ◽  
Quality Parameters ◽  
Growth Stages

A field experiment was conducted during Kharif 2018 at College Farm, College of Agriculture, PJTSAU to evaluate the effect of various sources of zinc and iron on grain yield, nutrient uptake and grain quality parameters of finger millet. The experiment was laid out in a randomized block design with 14 treatments and replicated thrice.The results revealed that application of different Zinc and iron sources at different rates significantly influenced the grain yield, nutrient (N, P and K) uptake and grain quality parameters (protein and calcium content) of finger millet. Highest grain yield (3653 kg ha-1), protein (11.25%) and calcium content (2.33%) in grain were obtained in the treatment receiving RDF + foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with treatment receiving RDF + foliar application of Fe-humate twice at 30 and 60 DAS (3612 kg ha-1, 10.90% and 2.0%) and the lowest grain yield (1995 kg ha-1), (6.25%) and calcium content (1.10%) were recorded with application of RDF alone. The nutrient uptake (N, P, K and Fe) at all the crop growth stages was significantly higher with the treatment receiving RDF (60:40:30 kg N,P2O5 and K2O kg ha-1) + foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with treatment receiving RDF+ foliar application of Fe-humate twice at 30 and 60 DAS. Highest iron uptake was recorded in treatment receiving RDF+foliar application of FeSO4 @ 0.5% twice at 30 and 60 DAS which was on par with T8, T14 treatments.The highest nutrient uptake of Zinc was obtained in treatment receiving RDF + Zn Humate foliar spray @ 0.25% twice at 30 and 60 days after sowing which was on par with treatment receiving RDF + Zn Humate soil  application. Contrary to the grain yield, nutrient uptake, protein and calcium content there were no significant differences between treatments with respect to Zn, Fe and carbohydrate content in grain.

scholarly journals Management Of Thrips And Pod Borers Using Chemicals, Botanicals And Biopesticides In Mungbean

2020 ◽  
Vol 17 (2) ◽  
pp. 79-91
Author(s):  
KN Islam ◽  
MMH Khan ◽  
MA Latif ◽  
MM Uddin ◽  
MM Islam
Keyword(s):  
Control Measure ◽  
Block Design ◽  
Maximum Yield ◽  
Effective Control ◽  
Cost Ratio ◽  
Marginal Benefit ◽  
Benefit Cost Ratio ◽  
Pod Borer ◽  
Legume Pod Borer ◽  
Benefit Cost

The experiment was conducted to find out effective control measure against thrips and pod borers of mungbean by various means, including chemicals, botanicals and biopesticide. The mungbean variety, BARI Mung-6 was grown in the field and six treatments viz., T1 [Azadirachtin (Bioneem plus 1EC)], T2 [Bacillus thuringiensis (Bt. powder)], T3 [Spinosad (Tracer 45SC)], T4 [Chlorpyrifos + Cypermethrin (Nitro 505EC)], T5 [Thiamethoxam + Chlorantraniliprole (Voliam flexi 300SC)] and T0 [Untreated control (water spray)] were set in randomized complete block design (RCBD) with three replications. The insecticidal treatment options showed significantly different performance against thrips (Megalurothrips distalis), gram pod borer (Helicoverpa armigera) and legume pod borer (Maruca vitrata) on mungbean. The lowest population of thrips, gram pod borer and legume pod borer was found in Voliam flexi 300SC treated plot which showed maximum percent reduction of these pests. The lowest percent pod infestation by pod borers observed by the same treatment. Bioneem plus showed the intermediate results considering all the parameters. The maximum yield (1254.50 kg ha-1) and the highest marginal benefit cost ratio (MBCR) (6.68) were obtained from Voliam flexi 300SC. Considering effectiveness and marginal benefit cost ratio, Voliam flexi 300SC was more effective among treatments for controlling thrips and pod borers of mungbean followed by Nitro 505EC. SAARC J. Agri., 17(2): 79-91 (2019)

DEVELOPMENT OF AN INTEGRATED MANAGEMENT APPROACHES FOR MUNGBEAN YELLOW MOSAIC VIRUS OF GREEN GRAM [VIGNA RADIATA (L.) WILCZEK ] IN BUNDELKHAND ZONE

2018 ◽  
Vol 24 (1) ◽  
Author(s):  
ANIL KUMAR SINGH ◽  
J.K. BABELE ◽  
R.K.S. TOMAR
Keyword(s):  
Mosaic Virus ◽  
Seed Treatment ◽  
Integrated Management ◽  
Green Gram ◽  
Yellow Mosaic Virus ◽  
Economic Losses ◽  
Resistant Variety ◽  
Cost Ratio ◽  
Benefit Cost Ratio ◽  
Mungbean Yellow Mosaic Virus

Mungbean yellow mosaic virus (MYMV) disease is one of the most vicious diseases of green gram and has been renowned in India for more than five decades. The economic losses due to this virus account up to 85% in green gram which is spreading faster towards newer areas. A field experiment was carried out by Krishi Vigyan Kendra during kharif seasons at the farmers’ fields in villages Sitapur, Datia district of BundelKhand zone to evaluate the five integrated pest management module including conventional farmers’ practices against green gram sucking pest (white fly) and YMV. Among the test modules, Module 3 (Resistant variety TJM 3+ Seed treatment with Imidacloprid 17.8 % SL @ 5 ml/kg seeds +2 sprays of Imidacloprid 17.8 % SL @ 0.5 ml/l water) found as the most effective treatments with more than 91.58 percent mean reduction in nymphal population of whiteflies and below 2 percent incidence of YMV followed by Module 2 (Module 1 +2 sprays of Neem oil (5% Azadirachtin) @ 3.0 ml/l), Module 4 (Module 1 + 2 sprays of Triazophos 40 % EC @ 1.5 ml/l), Module 1(Resistant variety TJM 3+ Seed treatment with Imidacloprid 17.8 % SL @ 5 ml/kg seeds). All the IPM modules were found significantly superior over the conventional farmers’ practices in reducing the incidence of YMV in black gram. Higher mean yield of 9.35 q/ha in Module 3 followed by Module 2, Module 4, and Module 1 were recorded in the IPM fields against 6.75 q/ha in farmers’ practise fields. Module 3 obtained maximum return with higher benefit cost ratio followed by Module 2, Module 4, and Module 1.

Response of potassium nitrate on yield and yield contributing characters of boro rice cv. BRRI dhan28

2020 ◽  
Vol 01 (01) ◽  
pp. 05-13
Author(s):  
M. Hasan ◽  
M. B. Akter ◽  
M. M. Karim ◽  
F. Yasmine ◽  
A. K. Hasan
Keyword(s):  
Grain Yield ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Potassium Nitrate ◽  
Growth And Yield ◽  
Growth Stages ◽  
Yield Production ◽  
Initiation Stage ◽  
Boro Rice

The experiment was conducted at the Agronomy Field Laboratory, Bangladesh Agricultural University, Mymensingh, to explore the growth and yield performance of boro rice cv. BRRI dhan28 is influenced by foliar spray of potassium nitrate (KNO3) at four rice growth stages. The experiment consisted of four doses of KNO3 viz. 0 (Control), 0.25, 0.50 and 1.00 kg ha−1 and applied at four growth stages of rice development viz. at panicle initiation, at ear emergence, at anthesis period and at dough stage. This experiment was carried out in Randomized Complete Block Design (RCBD) with three replications with 10 m2 (4.0 m × 2.5 m) unit plot size and spacing between blocks and unit plots was 1 m and 0.5 m, respectively. Results revealed that foliar application of potassium nitrate at four growth stages significantly affected yield and yield contributing characters of BRRI dhan28. But most of the yield contributing characters did not differ significantly due to the interaction between potassium nitrate and stage of foliar spray. However, the foliar application of KNO3 @ 0.25 kg ha−1 showed the highest yield production (5.86 kg ha−1) while the lowest yield (4.85 kg ha−1) was found in control. Furthermore, better yield performances were recorded when the KNO3 was applied at panicle initiation stage rather than the other four growth stages. The total number of tillers, 1000–grain weight and grain yield, was higher with foliar spraying of a 0.25 kg ha−1 KNO3 at panicle initiation stage. From this experiment, it may be concluded that foliar application of KNO3 affected the yield performances of BRRI dhan28 and 0.25 kg ha−1 KNO3 produced the highest grain yield when applied at panicle initiation stage of boro rice.

scholarly journals Control of Rhizome Rot Disease of Ginger (Zingiber officinale Rose) by Chemicals, Soil Amendments and Soil Antagonis

2010 ◽  
pp. 57-61 ◽  
Author(s):  
A Ayub ◽  
N Sultana ◽  
MI Faruk ◽  
MM Rahman ◽  
ANM Mamun
Keyword(s):  
Seed Treatment ◽  
Field Experiments ◽  
Control Measure ◽  
Soil Amendments ◽  
Organic Amendments ◽  
Zingiber Officinale ◽  
Effective Control ◽  
Plant Soil ◽  
Rot Disease ◽  
Rhizome Rot

Two field experiments were conducted at domar and sadar upzilla of Nilphamari district to find out an effective control measure against rhizome rot (Pythium aphanidermatam) disease of ginger (Zingiber officinale Rose). Each experiment consisted of nine treatments, where three fungicides (Ridomil, Metataf and Secure), three organic amendments (poultry refuse, mustard oilcake and saw dust burning) and two bio control agents (Trichoderma harzianum and T. viride) were tested. Fungicides were used as seed treatment and soil drenching and organic materials and bio control agents were used as pre plant soil amendments. All the treatments significantly decreased the incidence and severity of the diseases and increased germination, tiller number and rhizome yield. The most effective treatment was seed treatment (0.2%) and soil drenching (0.2%) with Ridomil gold. Seed treatment and soil drenching with Secure (0.1%) and soil amendment with poultry refuse (10 t/ha) were also found to be effective to control the diseases and to increase rhizome yield.

scholarly journals AGRO-ECOLOGICAL AND SOCIO-ECONOMIC ASPECTS OF CROP PROTECTION IN CHILI-BASED AGRIBUSINESS IN CENTRAL JAVA

Agriekonomika ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 120
Author(s):  
Joko Mariyono
Keyword(s):  
Yield Loss ◽  
Insect Pests ◽  
Control Measure ◽  
Crop Protection ◽  
Dry Season ◽  
Economic Losses ◽  
Wet Season ◽  
Potential Yield ◽  
Pests And Diseases ◽  
Central Java

<p><em>Chili is an important cash crop in Indonesia. This study is to analyze socio-economic aspect of chili production in three selected communities of three districts —Magelang, Brebes, and Rembang— that represent distinct agroecosystems of chili cultivation within Central Java province. This study uses quantitative descriptive methods. Data were compiled from a series of surveys in 2010-2011. The results of analyses were presented in table and graphical forms to compare and contrast selected relevant variables associated with crop protection. The results show that yield loss due to pests and diseases was considerable, and some of these problems were becoming difficult to control. The economic losses varied, which depended on many factors. The potential yield loss could reach 100 percent. Among the eight major insect pests reported by farmers during the dry season, thrips, mites, and whitefly infestations were most severe. Likewise, among five diseases noted by farmers, the three most important—anthracnose (Colletotrichum capsici), gemini-viruses, and Phytophthora—were more serious than the others. During the wet season, risk of anthracnose was very high; in the dry season, risk of yield lost to gemini-viruses and Phytophthora was high. Within a province, the severe outbreaks of insect pests and diseases varied across locations and seasons. Farmers applied control measure using pesticides and other alternative controls. However, the problem still persisted. There is a crucial need to solve the problems by enhancing farmers’ knowledge and involving research institutions focusing on crop protection strategy.</em></p>

scholarly journals Peran Tanaman Aromatik Dalam Menekan Perkembangan Hama Spodoptera litura Pada Tanaman Kubis

Agrologia ◽  
2018 ◽  
Vol 1 (2) ◽  
Author(s):  
Johan A Patty
Keyword(s):  
Spodoptera Litura ◽  
Insect Pests ◽  
Block Design ◽  
Crop Damage ◽  
Design Parameters ◽  
Aromatic Plants ◽  
Larval Population ◽  
Botanical Pesticides ◽  
Randomized Block Design

Plant pests Spodoptera litura is one of the major insect pests that often lowers the cabbage yield. Various control techniques of this pest have been developed, such as the use of botanical pesticides. This study aimed to determine the role of aromatic plants in reducing S. litura population growth and plant damage intensity on cabbage. Experiments used intercropping combinations of cabbage-local basil (‘kemangi’), cabbage-tomato, cabbage-scallion and without aromatic plants as a control. The experimental was arranged in a Randomized Block Design. Parameters measured were larval population, damage intensity and fresh weight of cabbage crops. The results showed that all three cabbage intercropping with the aromatic plants were able to suppress population of S. litura and the resulted damage intensity of cabbage. The treatment of cabbage intercropping with local basil could reduce larval populations of S. litura (to 0.84 larvae) or only 8 larvae per 10 plants and with the lowest crop damage intensity (3.32%) and highest crop weight (486.6 g) per plant.

Sign in / Sign up

Export Citation Format

Share Document