scholarly journals Elimination Study of Methylene Blue Dye Using PANI and PANI/SiO2 Composite.

2021 ◽  
Author(s):  
BENSEDIRA Abderrahim ◽  
HADDAOUI Nacerddine ◽  
DOUFNOUNE Rachida ◽  
MEZIANE Ouahiba ◽  
N. S. Labidi
Keyword(s):  
Methylene Blue ◽  
Adsorption Equilibrium ◽  
Dye Adsorption ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Adsorption Models ◽  
First Order ◽  
Adsorption Processes ◽  
Pseudo Second Order

Abstract Conducting Polymeric composites have attracted great attention over the last years because of their potential uses in chemical, electronic and optical devices, and as catalysts as well as in adsorption processes. Chemical synthesis of polyaniline (PANI) and polyaniline-SiO2 composite and their adsorptive performance were reported in the present work. These materials were prepared and evaluated for their methylene blue (MB) dye adsorption characteristics from aqueous solution. Adsorption equilibrium kinetic and thermodynamic experiments of MB onto PANI and PANI/SiO2 were studied. The effects of initial dye concentration, contact time and temperature on the adsorption capacity of PANI/SiO2 for MB have been investigated. The pseudo-first order and pseudo-second order kinetic models were used to describe the kinetic data. It was found that adsorption kinetics followed the pseudo-second order at all of the studied temperatures. The Langmuir, Freundlich and Dubinin Raduschkevich adsorption models were used for the mathematical description and the fit obtained using the Dubinin Raduschkevich isotherm has a medium R2 value.

scholarly journals Molybdenum Trioxide: Efficient Nanosorbent for Removal of Methylene Blue Dye from Aqueous Solutions

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2295 ◽  
Author(s):  
Souad Rakass ◽  
Hicham Oudghiri Hassani ◽  
Mostafa Abboudi ◽  
Fethi Kooli ◽  
Ahmed Mohmoud ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Removal Efficiency ◽  
Molybdenum Trioxide ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Removal Capacity ◽  
Pseudo Second Order

Nano Molybdenum trioxide (α-MoO3) was synthesized in an easy and efficient approach. The removal of methylene blue (MB) in aqueous solutions was studied using this material. The effects of various experimental parameters, for example contact time, pH, temperature and initial MB concentration on removal capacity were explored. The removal of MB was significantly affected by pH and temperature and higher values resulted in increase of removal capacity of MB. The removal efficiency of Methylene blue was 100% at pH = 11 for initial dye concentrations lower than 150 ppm, with a maximum removal capacity of 152 mg/g of MB as gathered from Langmuir model. By comparing the kinetic models (pseudo first-order, pseudo second-order and intraparticle diffusion model) at various conditions, it has been found that the pseudo second-order kinetic model correlates with the experimental data well. The thermodynamic study indicated that the removal was endothermic, spontaneous and favorable. The thermal regeneration studies indicated that the removal efficiency (99%) was maintained after four cycles of use. Fourier Transform Infrared (FTIR) and Scanning Electron Microscopy (SEM) confirmed the presence of the MB dye on the α-MoO3 nanoparticles after adsorption and regeneration. The α-MoO3 nanosorbent showed excellent removal efficiency before and after regeneration, suggesting that it can be used as a promising adsorbent for removing Methylene blue dye from wastewater.

scholarly journals Methylene Blue Dye Removal from Aqueous Media Using Activated Carbon Prepared by Lotus Leaves: Kinetic, Equilibrium and Thermodynamic Study

2021 ◽  
Vol 68 (2) ◽  
pp. 363-373
Author(s):  
Roya Salahshour ◽  
Mehdi Shanbedi ◽  
Hossein Esmaeili
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Sorption Process ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Methylene Blue Dye ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Lotus Leaves

In the present work, methylene blue was eliminated from aqueous solution using activated carbon prepared by lotus leaves. To perform the experiments, batch method was applied. Also, several analyses such as SEM, FTIR, EDAX and BET were done to determine the surface properties of the activated carbon. The results showed that the maximum sorption efficiency of 97.59% was obtained in initial dye concentration of 10 mg/L, pH of 9, adsorbent dosage of 4 g/L, temperature of 25 °C, contact time of 60 min and mixture speed of 400 rpm. Furthermore, the maximum adsorption capacity was determined 80 mg/g, which was a significant value. The experimental data was analyzed using pseudo-first order, pseudo-second order and intra-particle diffusion kinetic models, which the results showed that the pseudo-second order kinetic model could better describe the kinetic behavior of the sorption process. Also, the constant rate of the pseudo-second order kinetic model was obtained in the range of 0.0218–0.0345 g/mg.min. Moreover, the adsorption equilibrium was well described using Freundlich isotherm model. Furthermore, the thermodynamic studies indicated that the sorption process of methylene blue dye using the activated carbon was spontaneous and exothermic.

scholarly journals Methylene Blue Dye Adsorption from Wastewater Using Hydroxyapatite/Gold Nanocomposite: Kinetic and Thermodynamics Studies

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1403
Author(s):  
Kashma Sharma ◽  
Shreya Sharma ◽  
Vipasha Sharma ◽  
Pawan Kumar Mishra ◽  
Adam Ekielski ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Dye Adsorption ◽  
Precipitation Method ◽  
Diffusion Method ◽  
Blue Dye ◽  
Order Kinetic ◽  
Economic Point ◽  
X Ray ◽  
First Order ◽  
Pseudo First Order

The present work demonstrates the development of hydroxyapatite (HA)/gold (Au) nanocomposites to increase the adsorption of methylene blue (MB) dye from the wastewater. HA nanopowder was prepared via a wet chemical precipitation method by means of Ca(OH)2 and H3PO4 as starting materials. The biosynthesis of gold nanoparticles (AuNPs) has been reported for the first time by using the plant extract of Acrocarpus fraxinifolius. Finally, the as-prepared HA nanopowder was mixed with an optimized AuNPs solution to produce HA/Au nanocomposite. The prepared HA/Au nanocomposite was studied by using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and Scanning Electron Microscopy (SEM) with Energy Dispersive X-Ray Analysis (EDX) analysis. Adsorption studies were executed by batch experiments on the synthesized composite. The effect of the amount of adsorbent, pH, dye concentration and temperature was studied. Pseudo-first-order and pseudo-second-order models were used to fit the kinetic data and the kinetic modeling results reflected that the experimental data is perfectly matched with the pseudo-first-order kinetic model. The dye adsorbed waste materials have also been investigated against Pseudomonas aeruginosa, Micrococcus luteus, and Staphylococcus aureus bacteria by the agar well diffusion method. The inhibition zones of dye adsorbed samples are more or less the same as compared to as-prepared samples. The results so obtained indicates the suitability of the synthesized sample to be exploited as an adsorbent for effective treatment of MB dye from wastewater and dye adsorbed waste as an effective antibacterial agent from an economic point of view.

scholarly journals Potential Biosorbent Derived fromCalligonum polygonoidesfor Removal of Methylene Blue Dye from Aqueous Solution

2015 ◽  
Vol 2015 ◽  
pp. 1-11 ◽  
Author(s):  
Asma Nasrullah ◽  
Hizbullah Khan ◽  
Amir Sada Khan ◽  
Zakaria Man ◽  
Nawshad Muhammad ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Particle Size ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Particle Size Analyzer ◽  
Initial Ph ◽  
Pseudo Second Order ◽  
Kinetics Of

The ash ofC. polygonoides(locally called balanza) was collected from Lakki Marwat, Khyber Pakhtunkhwa, Pakistan, and was utilized as biosorbent for methylene blue (MB) removal from aqueous solution. The ash was used as biosorbent without any physical or chemical treatment. The biosorbent was characterized by using various techniques such as Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). The particle size and surface area were measured using particle size analyzer and Brunauer-Emmett-Teller equation (BET), respectively. The SEM and BET results expressed that the adsorbent has porous nature. Effects of various conditions such as initial concentration of methylene blue (MB), initial pH, contact time, dosage of biosorbent, and stirring rate were also investigated for the adsorption process. The rate of the adsorption of MB on biomass sample was fast, and equilibrium has been achieved within 1 hour. The kinetics of MB adsorption on biosorbent was studied by pseudo-first- and pseudo-second-order kinetic models and the pseudo-second-order has better mathematical fit with correlation coefficient value (R2) of 0.999. The study revealed thatC. polygonoidesash proved to be an effective, alternative, inexpensive, and environmentally benign biosorbent for MB removal from aqueous solution.

scholarly journals Removal of Methylene Blue from Aqueous Solution by Activated Carbon Prepared from Pea Shells (Pisum sativum)

2013 ◽  
Vol 2013 ◽  
pp. 1-9 ◽  
Author(s):  
Ünal Geçgel ◽  
Gülce Özcan ◽  
Gizem Çağla Gürpınar
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Aqueous Solutions ◽  
Kinetic Studies ◽  
Second Order ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Langmuir And Freundlich Models

An activated carbon was prepared from pea shells and used for the removal of methylene blue (MB) from aqueous solutions. The influence of various factors such as adsorbent concentration, initial dye concentration, temperature, contact time, pH, and surfactant was studied. The experimental data were analyzed by the Langmuir and Freundlich models of adsorption. The adsorption isotherm was found to follow the Langmuir model. The monolayer sorption capacity of activated carbon prepared from pea shell for MB was found to be 246.91 mg g−1at 25∘C. Two simplified kinetic models including pseudo-first-order and pseudo-second-order equation were selected to follow the adsorption processes. Kinetic studies showed that the adsorption followed pseudo-second-order kinetic model. Various thermodynamic parameters such as , , and were evaluated. The results in this study indicated that activated carbon prepared from pea shell could be employed as an adsorbent for the removal of MB from aqueous solutions.

The Study of the Modified Grain Sorghum Stalk to Remove Methylene Blue Dye from Aqueous Solution

2012 ◽  
Vol 430-432 ◽  
pp. 197-201
Author(s):  
Feng Yu Li ◽  
Sheng Hua Zhang ◽  
Jin Yi Chen
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Low Cost ◽  
Grain Sorghum ◽  
Blue Dye ◽  
Order Kinetic ◽  
Adsorption Processes ◽  
Effects Of Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Pyromellitic dianhydride(PMDA）- modified grain sorghum stalk was used as a novel low-cost adsorbent to remove cationic dye methylene blue(MB) from aqueous solution. Bath studies were carried out to investigate the effects of pH and retention time on the adsorption of MB. The adsorption process could obtain >98% removal percentage within 30 minutes as the MB concentration was at 200 and 300 mg/L. And for 400 mg/L MB, 99% was removed in 6 hrs. The kinetics study showed that the adsorption processes followed the pseudo-second-order kinetic model, which confirming that the sorption rate is controlled by chemical adsorption. Equilibrium isotherms were analyzed by the Langmuir and Freundlich models. Langmuir model can be fitted better than Freundlich with maximum monolayer adsorption capacity of 568.18 mg/g for MB.

scholarly journals Removal of nickel ions and methylene blue dyes from aqueous solutions using alkaline algae biomass

2019 ◽  
Vol 26 (3) ◽  
pp. 17-24
Author(s):  
Aya Abbas Najim ◽  
Ahmed A. Mohammed
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Second Order ◽  
Blue Dye ◽  
Order Kinetic ◽  
Diffusion Kinetic ◽  
Algae Biomass ◽  
Nickel Ions ◽  
Maximum Sorption Capacity ◽  
Pseudo Second Order

The sorption of nickel (II) and methylene blue dye (MB) from aqueous solution by alkaline treated algae biomass was investigated. 0.05 M NaOH resulted in increasing the removal efficiency of algae biomass from 77.48 to 97.43% and from 79.71 to 97.53 % for Ni (II) and MB, respectively. Pseudo first order, pseudo second order and intra- particle diffusion kinetic models were tested, good coefficients of determination (R2) were attained from pseudo second order kinetic model for both contaminants; therefore, chemical adsorption was the mechanism that governed the sorption process by alkaline treated algae. The data were best fitted to Langmuir isotherm model and a maximum sorption capacity achieved were 2.889 mg/g for Ni (II) and 6.406 mg/g for MB. The separation factor shows irreversible isotherm type due to RL  1 for both contaminants. Alkali pretreatment of algae mixture could be an effective and low cost strategy for enhancing Ni (II) and MB sorption from aqueous solution.

scholarly journals Study on the adsorption of methylene blue from aqueous solution using hydrogel glucomannan/graphene oxide

2021 ◽  
Vol 10 (1) ◽  
pp. 59-66
Author(s):  
Son Le Lam ◽  
Phu Nguyen Vinh ◽  
Hieu Le Trung ◽  
Tan Le Thua ◽  
Nhan Dang Thi Thanh ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Methylene Blue ◽  
Graphene Oxide ◽  
Adsorption Capacity ◽  
Organic Dyes ◽  
Dye Adsorption ◽  
Order Kinetic ◽  
Equilibrium Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Glucomannan/graphene oxide (GM/GO) hydrogel was synthesized by using calcium hydroxide as the crosslinker. The synthesized material was characterized by using IR, XRD, SEM, EDX and RAMAN technology. The composite hydrogel was used for removal of organic dyes from aqueous solution. The results showed that the GM/GO hydrogel had a porous structure and a high adsorption capacity toward methylene blue (MB). The pseudo-second-order kinetic model could fit the rate equation of MB adsorption onto the GM/GO hydrogel. The adsorption of MB onto GM/GO hydrogel was a spontaneous process. In addition, the equilibrium adsorption isotherm data indicated that equilibrium data were fitted to the Langmuir isotherm and the maximum dye adsorption capacity was 198,69 mg.g-1. Moreover, the hydrogel was stable and easily recovered and adsorption capacity was around 97% of the initial saturation adsorption capacity after being used five times.

scholarly journals Heterogeneous Fenton-Like Oxidation of Methylene Blue Using Alternative Catalysts

2021 ◽  
Vol 29 (48) ◽  
pp. 91-97
Author(s):  
Juraj Michálek ◽  
Kseniya Domnina ◽  
Veronika Kvorková ◽  
Kristína Šefčovičová ◽  
Klaudia Mončeková ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Methylene Blue ◽  
Low Cost ◽  
Hydrogen Peroxide Solution ◽  
Blue Dye ◽  
Order Kinetic ◽  
Heterogeneous Fenton ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Black Nickel

Abstract The usage of the low-cost catalysts for methylene blue removal from wastewater was investigated. Heterogeneous Fenton-like process consists of the use of a hydrogen peroxide solution, and an iron-rich catalyst, red mud and black nickel mud were used for that purpose. The factors such as the catalyst dose and the hydrogen peroxide solution volume were monitored. The results of experiments showed that the degradation of methylene blue dye in Fenton-like oxidation process using selected catalysts can be described by a pseudo-second-order kinetic model. The highest dye removal efficiency (87.15 %) was achieved using the black nickel mud catalyst after 30 minutes of reaction.

scholarly journals Adsorption of Cu (II) and Ni (II) Ions from Solution onto Calcium Alginate Beads

2020 ◽  
Vol 24 (2) ◽  
pp. 329-333
Author(s):  
D.O. Jalija ◽  
A . Uzairu
Keyword(s):  
Contact Time ◽  
Calcium Alginate ◽  
Alginate Beads ◽  
Second Order ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Calcium Alginate Beads ◽  
First Order ◽  
Pseudo Second Order ◽  
Pseudo First Order

The objective of this study was to investigate the biosorption of Cu (II) and Ni (II) ions from aqueous solution by calcium alginate beads. The effects of solution pH, contact time and initial metal ion concentration were evaluated. The results showed that maximum Cu (II) removal (93.10%) occurred at pH of 9.0, contact time of 120 minutes and initial ion concentration of 10 mg/L while that of Ni (II) was 94.6%, which was achieved at pH of 8.0, contact time of 120 minutes and initial ion concentration of 10 mg/L. The equilibrium data fitted well to the Langmuir Isotherm indicating that the process is a monolayer adsorption. The coefficients of determination, R2, values for the Langmuir Isotherm were 0.9799 and 0.9822 respectively for Cu (II) and Ni (II) ions. The values of the maximum biosorption capacity, Qo, were 10.79 and 6.25 mgg-1 respectively. The kinetic data also revealed that the sorption process could best be described by the pseudo – second order kinetic model. The R2 values for the pseudo – second order kinetic plots for Cu (II) and Ni (II) were 0.9988 and 0.9969 respectively. These values were higher than those for the pseudo – first order plots. The values of the biosorption capacity qe obtained from the pseudo – second order plots were very close to the experimental values of qe indicating that the biosorption process follows the second order kinetics. This study has therefore shown that calcium alginate beads can be used for the removal of Cu (II) and Ni (II) ions from wastewaters. Keywords: Keywords: Adsorption, Calcium alginate, Isotherm, Langmuir, Pseudo- first order, Pseudo-second order

Sign in / Sign up

Export Citation Format

Share Document