scholarly journals Gas Permeability Change With Deformation and Cracking of a Sandstone Under Triaxial Compressiongas Permeability Change With Deformation and Cracking of a Sandstone Under Triaxial Compression

2022 ◽  
Author(s):  
Yuan-Jian LIN ◽  
Jiang-Feng LIU ◽  
Tao CHEN ◽  
Bing-Xiang HUANG ◽  
Kundwa Marie Judith ◽  
...  
Keyword(s):  
Gas Permeability ◽  
Triaxial Compression ◽  
Gas Injection ◽  
Injection Pressure ◽  
Confining Pressure ◽  
Loading Path ◽  
Permeability Change ◽  
Permeability Evolution ◽  
Axial Pressure ◽  
Triaxial Cell

Abstract In this paper, a THMC (Thermal-Hydrological-Mechanical-Chemical) multi-field coupling triaxial cell was used to systematically study the evolution of gas permeability and the deformation characteristics of sandstone. The effects of confining pressure, axial pressure, and air pressure on gas permeability characteristics were fully considered in the test. The gas permeability of sandstone decreases with increasing confining pressure. When the confining pressure is low, the variation of gas permeability is greater than the variation of gas permeability at high confining pressure. The gas injection pressure has a significant effect on the gas permeability evolution of sandstone. As the gas injection pressure increases, the gas permeability of sandstone tends to decrease. At the same confining pressure, the gas permeability of the sample during the unloading path is less than the gas permeability of the sample in the loading path. When axial pressure is applied, it has a significant influence on the permeability evolution of sandstone. When the axial pressure is less than 30 MPa, the gas permeability of the sandstone increases as the axial pressure increases. At axial pressures greater than 30 MPa, the permeability decreases as the axial pressure increases. Finally, the micro-pore/fracture structure of the sample after the gas permeability test was observed using 3D X-ray CT imaging.

scholarly journals Gas Permeability Change with Deformation and Cracking of a Sandstone under Triaxial Compression

2021 ◽  
Author(s):  
Yuan-Jian LIN ◽  
Jiang-Feng LIU ◽  
Tao CHEN ◽  
Shi-Jia MA ◽  
Pei-Lin WANG ◽  
...  
Keyword(s):  
Gas Permeability ◽  
Axial Stress ◽  
Triaxial Compression ◽  
Gas Injection ◽  
Injection Pressure ◽  
Confining Pressure ◽  
Loading Path ◽  
Permeability Evolution ◽  
Axial Pressure ◽  
Triaxial Cell

Abstract In this paper, a THMC multi-field coupling triaxial cell was used to systematically study the evolution of gas permeability and the deformation characteristics of sandstone. The effects of confining pressure, axial pressure and air pressure on gas permeability characteristics were fully considered in the test. The gas permeability of sandstone decreases with increasing confining pressure. When the confining pressure is low, the variation of gas permeability is greater than the variation of gas permeability at high confining pressure. The gas injection pressure has a significant effect on the gas permeability evolution of sandstone. As the gas injection pressure increases, the gas permeability of sandstone tends to decrease. At the same confining pressure, the gas permeability of the sample during the unloading path is less than the gas permeability of the sample in the loading path. When axial pressure is applied, the axial stress has a significant influence on the permeability evolution of sandstone. When the axial pressure is less than 30 MPa, the gas permeability of the sandstone increases as the axial pressure increases. At axial pressures greater than 30 MPa, the permeability decreases as the axial pressure increases. Finally, the micro-pore/fracture structure of the sample after the gas permeability test was observed using 3D X-ray CT imaging.

scholarly journals Experimental Study on the Permeability Evolution and Gas Flow Law of Post-Strength Soft Coal

2020 ◽  
Vol 10 (3) ◽  
pp. 1039
Author(s):  
Chao Hou ◽  
Jianhong Ma ◽  
Xiaoguang Jin ◽  
Du Ni
Keyword(s):  
Experimental Study ◽  
Gas Flow ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Permeability Evolution ◽  
Axial Pressure ◽  
Soft Coal ◽  
Secondary Damage ◽  
Flow Law ◽  
Gas Disasters

Permeability is an essential indicator for predicting gas drainage yield and preventing mine gas disasters, which is significantly influenced by the stress paths and the integrity of coal. Conventional research on permeability mainly focused on the permeability evolution of initial undamaged or fractured (prefabricated fractures) coal under various stress paths; little attention has been paid to post-strength coal (stress-induced damage), especially for soft coal. To determine the permeability evolution and gas flow law of post-strength soft coal samples under various stress paths, we used the experimental method combined with the numerical method in this study. The results showed that when the confining pressure and axial pressure of post-strength soft coal samples were unloaded, the permeability increased by 1.25–1.32 times; when the coal samples were loaded into the secondary damage, the permeability first decreased and then increased. The simulation part in this study found that the development of the fracture of coal samples under triaxial compression was divided into four stages. Gas flow law of post-strength soft coal was significantly influenced by fracture locations, and the gas pressure and gas flow field near the fracture were disturbed.

scholarly journals Experimental Investigation on the Evolution of Damage and Seepage Characteristics for Red Sandstone under Thermal-mechanical Coupling Conditions

2021 ◽  
Author(s):  
Haopeng Jiang ◽  
Annan Jiang ◽  
Fengrui Zhang
Keyword(s):  
High Temperature ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Effect Of Temperature ◽  
Permeability Evolution ◽  
Red Sandstone ◽  
Permeability Characteristics ◽  
Mechanical Coupling ◽  
Coupling Conditions ◽  
Rock Stability

Abstract Rock masses in underground space usually experience the coupling of high-temperature field, stress field and seepage field, which gives them complex mechanical behavior and permeability characteristics. In order to study the mechanical properties and permeability characteristics of red sandstone under different temperature environments, a seepage test under high temperature and triaxial compression is carried out based on the RLW-2000 multi-field coupling tester. The results show that the plastic flow of red sandstone at the stress peak under the same temperature is more obvious with the increase of confining pressure. In addition, as the confining pressure gradient increases, the permeability decreases and the trend becomes slower. And the higher the operating temperature, the easier to produce seepage channels inside the rock sample. The development of fissures is rapidly developed under the effect of temperature, so the seepage channels are widened and increased, and the permeability is greatly increased. The constitutive model of rock statistical damage considering the interaction of high temperature and osmotic pressure was constructed based on the experimental data and combining theoretical methods to reveal the characteristics of permeability evolution induced by thermal damage of rocks. The research results can be used as a reference for monitoring rock stability during geological engineering projects involving thermal-seepage-stress coupling conditions.

scholarly journals Study on the Permeability Evolution and Its Formation Mechanism of Xiaojihan Aquifer Coal Seam under Plastic Flow

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-16
Author(s):  
Jingna Guo ◽  
Jiangfeng Liu ◽  
Qiang Li ◽  
Zhanqing Chen
Keyword(s):  
Coal Seam ◽  
Plastic Flow ◽  
Residual Strain ◽  
Axial Strain ◽  
Confining Pressure ◽  
Loading Path ◽  
Influence Coefficient ◽  
Permeability Evolution ◽  
Coal Specimen ◽  
Recovery Coefficient

Study on permeability evolution of an aquifer coal seam in Western China is of great significance for preventing water inrush disaster and realizing water-conserving coal mining. The permeability evolution of an aquifer coal seam is related to a loading path closely under plastic flow. In this work, permeability variations of the Xiaojihan water-bearing coal seam and Longde nonwater coal seam are researched using a transient method under plastic flow. The experiment results indicated the following: (1) Under the same axial strain, the permeability, relative residual strain, and confining pressure influence coefficient of Xiaojihan coal specimens all decrease in plastic flow with the increase of loading-unloading times and confining pressure, while the permeability recovery coefficient increases during this process. (2) The permeability of Xiaojihan water-bearing coal specimens decreases with the growth of axial strain in plastic flow, resulting in the increase of relative residual strain and reinforcement of plasticity. Besides, the confining pressure influence coefficient decreases and the permeability recovery coefficient decreases slightly with the axial strain. (3) Finally, the permeability of Xiaojihan coal specimens is greater than that of Longde coal specimens, while the confining pressure influence coefficient and permeability recovery coefficient of Longde coal specimens are greater than those of Xiaojihan coal specimens. The closure rate of internal cracks of the water-bearing coal specimen is lower than that of the nonwater coal specimen, which is beneficial for water storage and transport.

scholarly journals Experimental Investigation on Permeability Evolution of Dolomite Caprock under Triaxial Compression

Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6535
Author(s):  
Deng Xu ◽  
Jianfeng Liu ◽  
Zhide Wu ◽  
Lu Wang ◽  
Hejuan Liu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Triaxial Compression ◽  
Confining Pressure ◽  
Test Machine ◽  
Permeability Evolution ◽  
Triaxial Compressive Strength ◽  
Confining Pressures ◽  
Porosity And Permeability ◽  
The Difference ◽  
Maximum Permeability

In order to study the influence of different confining pressures on the stability and airtightness of dolomite underground gas storage, a permeability test under hydrostatic confining pressure, conventional triaxial compression test and gas–solid coupling test under triaxial compression were carried out on MTS815 test machine. During the tests, an acoustic emission (AE) monitoring system was also employed to estimate the rock damage. The experimental results showed that the relationships between permeability, porosity and hydrostatic confining pressure were exponential function and power function, respectively. Increasing confining pressure reduced the porosity and permeability of dolomite, and increased its triaxial compressive strength, but the addition of nitrogen reduced the compressive strength of dolomite by 10~30%, the higher the confining pressure, the smaller the difference. Compared with the maximum permeability under 15 MPa, confining pressure in the gas–solid coupling experiment, the maximum permeability under confining pressure of 30, 45, and 60 MPa is reduced by 42.0%, 84.4%, and 97.9%, respectively. In addition, the AE activity of dolomite decreases significantly with the increase in confining pressure, which also delayed the arrival of the AE active period.

scholarly journals Impurity Effects on the Mechanical Properties and Permeability Characteristics of Salt Rock

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1366 ◽  
Author(s):  
Qiangxing Zhang ◽  
Jianfeng Liu ◽  
Lu Wang ◽  
Min Luo ◽  
Hejuan Liu ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Pore Volume ◽  
Gas Permeability ◽  
Triaxial Compression ◽  
Impurity Content ◽  
Confining Pressure ◽  
Salt Rock ◽  
Impurity Effects ◽  
Rock Permeability ◽  
Permeability Characteristics

Impure salt rock strata are extensively distributed in China, giving them great significance in the study of the physical properties of impure salt rock for the construction of underground gas storage in salt mines. To investigate the confining pressure and impurity effects on the mechanical properties and gas permeability characteristics of salt rock, permeability tests under hydrostatic confining pressure and conventional triaxial compression (CTC), on salt rock samples with different impurity contents, were carried out. The results demonstrate that the confining pressure effects cause an increase in triaxial compression strength, but a decrease in permeability. However, impurity enhances the bearing capacity and permeability of the salt rock; both rock strength and permeability increase with an increase in impurity content. Moreover, the broken salt rock specimens were analyzed after the CTC test using Computed Tomography (CT) equipment. To understand the relationships between pore volume and permeability, considering the confining pressure and impurity effects, the cracks were divided into four groups according to different crack diameter ranges: ~0.05 mm, 0.05–1 mm, 1–10 mm and ~10 mm. The CT analysis results show that while the pore volume of smaller cracks shows an “increasing–decreasing” trend by increasing confining pressure, the pore volume of large cracks gradually decreases, indicating that the rock permeability is highly related to macro-cracks. However, impurity has more complicated implications on rock permeability and cracks, and needs further investigation.

scholarly journals Investigation of the Effect of Confining Pressure on the Mechanics-Permeability Behavior of Mudstone under Triaxial Compression

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-14
Author(s):  
Lu Shi ◽  
Zhijiao Zeng ◽  
Zhiming Fang ◽  
Xiaochun Li
Keyword(s):  
Turning Point ◽  
Triaxial Compression ◽  
Volumetric Strain ◽  
Ductile Failure ◽  
Confining Pressure ◽  
Small Strain ◽  
Permeability Evolution ◽  
The Maximum Principle ◽  
Confining Pressures ◽  
Onset Of Dilatancy

Injecting CO2 into a reservoir disturbs the geostress field, which leads to variations in the permeability of caprock and affects its sealing performance. In this paper, the evolution characteristics of the permeability of Yingcheng mudstone were experimentally studied during deviatoric compression under different confining pressures. As the confining pressure increased, the strength of the mudstone increased bilinearly, the angle between the fault and the maximum principle stress increased, and the fault became flatter. During compression, the permeability of mudstone first decreased and then increased and the turning point of the permeability was between the onset of dilatancy and the turning point of volumetric strain; when the fault formed, the permeability increased sharply and the fault-induced increment was reduced exponentially with increasing confining pressure. In addition, the mudstone transformed to the ductile failure mode when the effective confining pressure was greater than 35 MPa, which means that the permeability did not jump within a small strain. Finally, a practical strain-based model of permeability evolution that separately considers compaction and dilatancy was proposed, and the predicted permeability values were in good agreement with the experimental results. This study revealed the effect of confining pressure on permeability evolution during compression and can help evaluate the sealing ability of mudstone caprock.

scholarly journals Characterization of Permeability Changes in Coal of High Rank during the CH4-CO2 Replacement Process

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-8
Author(s):  
X. M. Ni ◽  
Q. F. Jia ◽  
Y. B. Wang
Keyword(s):  
Effective Stress ◽  
Bituminous Coal ◽  
Gas Adsorption ◽  
Gas Injection ◽  
Testing Machine ◽  
Injection Pressure ◽  
Confining Pressure ◽  
High Rank ◽  
Replacement Process ◽  
Matrix Expansion

The influences of coal matrix expansion/contraction and effective stress on the permeability of coal with different thermal maturities are different during the CH4-CO2 replacement process due to different mechanical properties and gas adsorption capacities. To accurately predict the variation law of coal permeability during the CH4-CO2 replacement process, it is critical to understand how the matrix expansion/contraction and effective stress affect the permeability of coal at different thermal maturities during the CH4-CO2 replacement. In this study, the permeability of two coal specimens with anthracite and high-rank bituminous coal during the CH4-CO2 replacement process under different confining and injection pressures was tested using a CBM replacement testing machine. The results demonstrate that with decreasing gas injection pressure, the permeability of the two coal specimens exhibited a U-shaped correlation under different confining pressures. Under the same gas injection pressure, with increasing effective stress, the permeability presented a negative exponential decrease and the permeability of the anthracite decreased more significantly. Moreover, under the same confining pressure, with increasing gas injection pressure, the decreasing permeability agreed with Langmuir curve and the permeability of high-rank bituminous coal was more significantly reduced.

Sign in / Sign up

Export Citation Format

Share Document