scholarly journals Seismic Collapse Probability and Life Cycle Cost Assessment of Isolated Structures Subjected to Pounding With Smart Hybrid Isolation System Using a Modified Fuzzy Based Controller

2022 ◽  
Author(s):  
Arash Rayegani ◽  
Gholamreza Nouri
Keyword(s):  
Life Cycle Cost ◽  
Fuzzy Logic Controller ◽  
Fragility Curves ◽  
Exceedance Probability ◽  
Dissipation Energy ◽  
Isolation System ◽  
Collapse Probability ◽  
Isolated Structures ◽  
Isolation Systems ◽  
Hybrid Isolation

Abstract The possibility of pounding on isolated structures with surrounding moat walls is one of the concerns in the design of isolation systems, especially in pulse-type near-field earthquakes. This paper puts forward the seismic probability assessment of structures equipped with passive and smart hybrid isolation systems by considering pounding possibilities. This investigation is performed on isolated structures equipped with a high damper rubber bearing (HDRB) considering stiff moat walls around the structure. In the Hybrid isolation system, magnetorheological dampers (MR) are considered an adaptive dissipation energy device along with isolators using an optimized novel interval Type-2 fuzzy logic controller with adaptive red-zone function (IT2FS+RZF) to reduce pounding possibilities. The fragility curves of the building for various cases are determined using IDA analysis, and possible damage costs are evaluated by using exceedance probability in each damage level. This study concludes that the collapse probability of the isolated structures with restrains at the code-based distance is over the acceptable limit of ASCE 7-22. The smart additional damping system with the proposed controller reduces the possible damage cost of the building by about 64% compared to the uncontrolled system and puts the collapse probability of the structure in the acceptable range.

A Study on the Response Instability of Seismically Isolated Structures Affected by Ground Inclination During Earthquakes Part 1 : Estimation of Ground Inclination During Earthquakes and the Influence of Static Ground Inclination

2011 ◽  
Vol 6 (3) ◽  
pp. 281-298 ◽  
Author(s):  
Mitsuo Miyazaki ◽  
◽  
Yukihiro Nishimura
Keyword(s):  
Seismic Isolation ◽  
Dynamic Performance ◽  
Restoring Force ◽  
Isolation System ◽  
Strong Earthquakes ◽  
Response Characteristics ◽  
Building Safety ◽  
Isolated Structures ◽  
Isolation Systems ◽  
Ground Motion Records

Seismic isolation can provide superior building safety and dynamic performance during strong earthquakes, however, it is known that some near-source ground motions produce excessive response deformations, which may be larger than the allowable capacity of the isolation devices. Isolation systems with longer periods and higher damping are more capable of resisting such deformations, and the author proposed new isolation systems with periods of 10 sec, or even longer. Longer isolation periods, however, mean less resistance and restoring force in the isolation systems, which may cause concerns about unstable response characteristics during strong earthquakes. One such unstable behavior is the possibility of excessive horizontal displacements of the isolation system resulting from ground inclination. Based on numerical analyses using existing vertical ground motion records, this paper estimates the ground inclination during earthquakes and studies the anticipated horizontal deformation of isolated structures that might be induced by such ground inclination.

Design and analysis of a vibration isolation system with cam–roller–spring–rod mechanism

2021 ◽  
pp. 107754632110005
Author(s):  
Yonglei Zhang ◽  
Guo Wei ◽  
Hao Wen ◽  
Dongping Jin ◽  
Haiyan Hu
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Experimental Studies ◽  
Excitation Amplitude ◽  
Isolation System ◽  
Vibration Isolation System ◽  
Stiffness Characteristic ◽  
Negative Stiffness Mechanism ◽  
Isolation Systems ◽  
Vibration Isolation Performance

The vibration isolation system using a pair of oblique springs or a spring-rod mechanism as a negative stiffness mechanism exhibits a high-static low-dynamic stiffness characteristic and a nonlinear jump phenomenon when the system damping is light and the excitation amplitude is large. It is possible to remove the jump via adjusting the end trajectories of the above springs or rods. To realize this idea, the article presents a vibration isolation system with a cam–roller–spring–rod mechanism and gives the detailed numerical and experimental studies on the effects of the above mechanism on the vibration isolation performance. The comparative studies demonstrate that the vibration isolation system proposed works well and outperforms some other vibration isolation systems.

Vulnerability-Based Design of Sliding Concave Bearings for the Seismic Isolation of Steel Storage Tanks

2016 ◽  
Author(s):  
Hoang Nam Phan ◽  
Fabrizio Paolacci ◽  
Silvia Alessandri ◽  
Phuong Hoa Hoang
Keyword(s):  
Liquid Steel ◽  
Seismic Isolation ◽  
Failure Modes ◽  
Fragility Curves ◽  
Time History ◽  
Probability Of Failure ◽  
Design Parameters ◽  
Economic Losses ◽  
Storage Tanks ◽  
Isolation System

Liquid steel storage tanks are strategic structures for industrial facilities and have been widely used both in nuclear and non-nuclear power plants. Typical damage to tanks occurred during past earthquakes such as cracking at the bottom plate, elastic or elastoplastic buckling of the tank wall, failure of the ground anchorage system, and sloshing damage around the roof, etc. Due to their potential and substantial economic losses as well as environmental hazards, implementations of seismic isolation and energy dissipation systems have been recently extended to liquid storage tanks. Although the benefits of seismic isolation systems have been well known in reducing seismic demands of tanks; however, these benefits have been rarely investigated in literature in terms of reduction in the probability of failure. In this paper, A vulnerability-based design approach of a sliding concave bearing system for an existing elevated liquid steel storage tank is presented by evaluating the probability of exceeding specific limit states. Firstly, nonlinear time history analyses of a three-dimensional stick model for the examined case study are performed using a set of ground motion records. Fragility curves of different failure modes of the tank are then obtained by the well-known cloud method. In the following, a seismic isolation system based on concave sliding bearings is proposed. The effectiveness of the isolation system in mitigating the seismic response of the tank is investigated by means of fragility curves. Finally, an optimization of design parameters for sliding concave bearings is determined based on the reduction of the tank vulnerability or the probability of failure.

Hysteresis Loops of Base Isolation System - An Overview

2021 ◽  
Vol 879 ◽  
pp. 189-201
Author(s):  
M.A. Amir ◽  
N.H. Hamid
Keyword(s):  
Earthquake Engineering ◽  
Structural Damage ◽  
Base Isolation ◽  
Numerical Models ◽  
Hysteresis Loops ◽  
Human Beings ◽  
Rc Buildings ◽  
Isolation System ◽  
Base Isolation System ◽  
Isolation Systems

Recently, there are a lot of technological developments in the earthquake engineering field to reduce structural damage and one of them is a base isolation system. The base isolation system is one of the best technologies for the safety of human beings and properties under earthquake excitations. The aim of this paper is to review previous research works on simulation of base isolation systems for RC buildings and their efficiency in the safety of these buildings. Base isolation decouples superstructure from substructure to avoid transmission of seismic energy to the superstructure of RC buildings. The most effective way to assess the base isolation system for RC building under different earthquake excitations is by conducting experiment work that consumes more time and money. Many researchers had studied the behavior of base isolation system for structure through modeling the behavior of the base isolation in which base isolator is modeled through numerical models and validated through experimental works. Previous researches on the modeling of base isolation systems of structures had shown similar outcomes as the experimental work. These studies indicate that base isolation is an effective technology in immunization of structures against earthquakes.

Engineered Components for Spent Fuel Radioactive Waste Isolation Systems—are They Technically Justified?

1981 ◽  
Vol 11 ◽  
Author(s):  
H. C. Burkholder
Keyword(s):  
United States ◽  
Radioactive Waste ◽  
Release Rate ◽  
The United States ◽  
Radioactive Waste Disposal ◽  
Radionuclide Transport ◽  
Spent Fuel ◽  
Isolation System ◽  
Waste Forms ◽  
Isolation Systems

In response to draft radioactive waste disposal standards, R&D programs have been initiated in the United States which are aimed at developing and ultimately using radionuclide transport-delaying (e.g., long-lived waste containers) and radionuclide transport-controlling (e.g., very low release rate waste forms) engineered components as part of the isolation system. Before these programs proceed significantly, it seems prudent to evaluate the technical justification for development and use of sophisticated engineered components in radioactive waste isolation.

scholarly journals Analysis and design of the power law damping based on the nonlinear vessel isolation system

2018 ◽  
Vol 10 (12) ◽  
pp. 168781401881719 ◽  
Author(s):  
You Wang ◽  
Xinghua Zhu ◽  
Rong Zheng ◽  
Zhe Tang ◽  
Bingbing Chen
Keyword(s):  
Resonant Frequency ◽  
Working Conditions ◽  
Power Law ◽  
Nonlinear Damping ◽  
Frequency Region ◽  
Isolation System ◽  
Analysis And Design ◽  
Force Transmissibility ◽  
Isolation Systems ◽  
Isolation Performance

In this study, the applications of the cubic power law damping in vessel isolation systems are investigated. The isolation performance is assessed using the force transmissibility of the vessel isolation system, which is simplified as a multiple-degree-of-freedom system with two parallel freedoms. The force transmissibilities of different working conditions faced in practice are discussed by applying the cubic power law damping on different positions of the vessel isolation system. Numerical results indicate that by adding the cubic power law damping to an appropriate position, the isolation system can not only suppress the force transmissibility over the resonant frequency region but also keep the force transmissibility unaffected at the nonresonant frequency region. Moreover, the design of the nonlinear vessel isolation system is discussed by finding the optimal nonlinear damping of the isolation system.

scholarly journals Seismic Fragility Analysis of Mid-Story Isolation Buildings

2021 ◽  
Keyword(s):  
Fragility Curves ◽  
Ground Motions ◽  
Near Field ◽  
Fragility Analysis ◽  
Seismic Fragility ◽  
Plastic State ◽  
Far Field ◽  
Analysis Method ◽  
Isolation System ◽  
Isolation Layer

Abstract. Seismic fragility analysis is essential for seismic risk assessment of structures. This study focuses on the damage probability assessment of the mid-story isolation buildings with different locations of the isolation system. To this end, the performance-based fragility analysis method of the mid-story isolation system is proposed, adopting the maximum story drifts of structures above and below the isolation layer and displacement of the isolation layer as performance indicators. Then, the entire process of the mid-story isolation system, from the initial elastic state to the elastic-plastic state, then to the limit state, is simulated on the basis of the incremental dynamic analysis method. Seismic fragility curves are obtained for mid-story isolation buildings with different locations of the isolation layer, each with fragility curves for near-field and far-field ground motions, respectively. The results indicate that the seismic fragility probability subjected to the near-field ground motions is much greater than those subjected to the far-field ground motions. In addition, with the increase of the location of the isolation layer, the dominant components for the failure of mid-story isolated structures change from superstructure and isolation system to substructure and isolation system.

scholarly journals Simplified Method for the Seismic Design of Low-Rise, Shear Wall Base- Isolated Buildings

2014 ◽  
Vol 8 (1) ◽  
pp. 22-33
Author(s):  
Arturo Tena-Colunga
Keyword(s):  
Seismic Design ◽  
Hybrid Method ◽  
Base Isolation ◽  
Shear Wall ◽  
Static Method ◽  
Isolation System ◽  
Strong Earthquakes ◽  
Wall Structures ◽  
Simplified Method ◽  
Isolated Structures

A simplified method for the seismic design of low-rise, base-isolated shear wall structures is proposed in MOC-2012. This simplified method is basically a hybrid method, where the design of the isolation system is a simpler version for the static method available in US guidelines for the design of base-isolated structures and the design of the superstructure essentially is an improved version of the simplified method for the seismic design of conventional low-rise shear wall structures of Mexican seismic codes. The application of this method and its effectiveness to obtain safe designs is illustrated with a practical example. It is anticipated this simple methodology would help promote the use of base isolation in low-rise shear wall structures and reduce their vulnerability when subjected to strong earthquakes.

A genetic algorithm–based design approach for smart base isolation systems

2017 ◽  
Vol 29 (7) ◽  
pp. 1315-1332 ◽  
Author(s):  
Mohtasham Mohebbi ◽  
Hamed Dadkhah ◽  
Hamed Rasouli Dabbagh
Keyword(s):  
Genetic Algorithm ◽  
Optimization Problem ◽  
Base Isolation ◽  
Design Procedure ◽  
Design Parameters ◽  
Linear Quadratic ◽  
Isolation System ◽  
Isolation Systems ◽  
Magneto Rheological ◽  
Smart Base Isolation

This article presents a new approach for designing effective smart base isolation systems composed of a low-damping linear base isolation and a semi-active magneto-rheological damper. The method is based on transforming the design procedure of the hybrid base isolation system into a constrained optimization problem. The magneto-rheological damper command voltages have been determined using H2/linear quadratic Gaussian and clipped-optimal control algorithms. Through a sensitivity analysis to identify the effective design parameters, base isolation and control algorithm parameters have been taken as design variables and optimally determined using genetic algorithm. To restrict increases in floor accelerations, the objective function of the optimization problem has been defined as minimizing the maximum base drift while putting specific constraint on the acceleration response. For illustration, the proposed method has been applied to design a semi-active hybrid isolation system for a four-story shear building under earthquake excitation. The results of numerical simulations show the effectiveness, simplicity, and capability of the proposed method. Furthermore, it has been shown that using the proposed method, the acceleration of the isolated structure can also be incorporated into design process and practically controlled with a slight sacrifice of control effectiveness in reducing the base drift.

Sign in / Sign up

Export Citation Format

Share Document